Touchpad Tapping in X

netbsdnoob

Hello all, how can i enable touchpad tapping in netbsd?

My touchpad is working fine, the only thing is that the tap to click is not working.
How can i enable it?

rvp

netbsdnoob not supported, currently, I think. Same for 2-finger scrolling.

JuvenalUrbino

netbsdnoob Hello all, how can i enable touchpad tapping in netbsd?

If you're speaking of two-finger tapping (= right click)...have you tried?:

 $ sysctl -w hw.synaptics.two_fingers_emulation=1
 $ echo hw.synaptics.two_fingers_emulation=1 >>/etc/sysctl.conf

This is not enabled by default IIRC
See pms(4) 😉

Simple tap-to-click (1 finger = left click) should work out the box

EDIT: my bad I hadn't followed the thread and didn't notice we were speaking of Elantech touchpads.

netbsdnoob

@rvp actually two finger scrolling is working nicely, i just think there should be a setting that i don't know of

rvp

netbsdnoob actually two finger scrolling is working nicely,

I am surprised--there is one guy who is desperate to have it working for him. Which laptop do you have?

nia

rvp One with an Elantech touchpad. The Elantech driver detects any movement with two fingers as scrolling. I briefly had this change for the Synaptics driver, but it broke click gestures which were essential to keep obscure hardware with only one button working. The Synaptics driver instead tries to measure "finger width" (i.e. it scrolls with two fingers held closely together), but the width detection seems to outright lie on newer hardware.

pfr

rvp That person is me!
haha, late to this thread I can see. So, where are we at? It works for some but not others? Elantech... never heard of him. Am guessing that my old thinkpad will not support this driver.

I am however, going to attempt to enable two-finger tapping.

netbsdnoob

An Asus K52Jc.

netbsdnoob

nia I was giving a peek at http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/dev/pckbport/?only_with_tag=MAIN
basically where there is the elantech driver.

Maybe we can get this working by using notes contained here ?
https://www.kernel.org/doc/html/latest/input/devices/elantech.html
They seem well documented.
I am going to give it a shot in the next days.

rvp

nia The Elantech driver detects any movement with two fingers as scrolling.

My Asus X202E has an Elantech touchpad too, and I just re-confirmed that 2-finger scrolling does not work on NetBSD. Hence my surprise. xev reports nothing (apart from random mouse up-down movement). Double-tapping does work, to my surprise (I habitually keep the blessed thing disabled).

netneo

nia The Synaptics driver instead tries to measure "finger width" (i.e. it scrolls with two fingers held closely together), but the width detection seems to outright lie on newer hardware.

Yes, my touchpad on the X250 is Synaptics so I've been going through man pms to check that out and fiddled with some sysctl settings but so far, no luck. Touchpad tapping does work out of the box but two-finger scrolling? Nope.

netbsdnoob

rvp I am sure about the fact that I am using NetBSD 9.1 with elantech touchpad, and my 2 finger scrolling
works smoothly! It's nice!

netbsdnoob

rvp How did you enable double-tapping with elantech?

rvp

netbsdnoob Works by default on my Elantech model. You probably have a different one.

netbsdnoob

Ok thanks for the info.

rvp

pfr I am however, going to attempt to enable two-finger tapping.

Can you post the dmesg output, and also the output of these commands:

$ xinput                       # get list of devices
$ xinput list-props <id>       # use id-num of the touchpad device in the list above.

pfr

rvp

~ λ xinput
⎡ Virtual core pointer                        id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                    id=4    [slave  pointer  (2)]
⎜   ↳ Mouse0                                        id=6    [slave  pointer  (2)]
⎣ Virtual core keyboard                       id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard                     id=5    [slave  keyboard (3)]
    ↳ <default keyboard>                              id=7    [slave  keyboard (3)]
~ λ xinput list-props 2
Device 'Virtual core pointer':
        Device Enabled (138):   1
        Coordinate Transformation Matrix (140): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000

Edit Now i think about it I probably should show the properties of id=6 😕

rvp

pfr Now i think about it I probably should show the properties of id=6

Yes. And the dmesg output also, please.

pfr

rvp

~ λ dmesg
[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[     1.000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[     1.000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
[     1.000000]     The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All rights reserved.

[     1.000000] NetBSD 9.3_STABLE (GENERIC) #0: Sun Nov  5 17:48:58 UTC 2023
[     1.000000] 	mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC
[     1.000000] total memory = 7871 MB
[     1.000000] avail memory = 7619 MB
[     1.000000] cpu_rng: RDRAND
[     1.000000] rnd: seeded with 256 bits
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] Kernelized RAIDframe activated
[     1.000000] running cgd selftest aes-xts-256 aes-xts-512 done
[     1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[     1.000003] LENOVO 2333F38 (ThinkPad X230)
[     1.000003] mainbus0 (root)
[     1.000003] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
[     1.000003] ACPI: XSDT 0x00000000DAFFE170 0000BC (v01 LENOVO TP-G2    00002770 PTL  00000002)
[     1.000003] ACPI: FACP 0x00000000DAFE5000 00010C (v05 LENOVO TP-G2    00002770 PTL  00000002)
[     1.000003] ACPI: DSDT 0x00000000DAFE7000 011383 (v01 LENOVO TP-G2    00002770 INTL 20061109)
[     1.000003] ACPI: FACS 0x00000000DAF5A000 000040
[     1.000003] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-G2    00002770 PTL  00000001)
[     1.000003] ACPI: TCPA 0x00000000DAFFC000 000032 (v02 PTL    LENOVO   06040000 LNVO 00000001)
[     1.000003] ACPI: SSDT 0x00000000DAFFB000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[     1.000003] ACPI: SSDT 0x00000000DAFFA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[     1.000003] ACPI: SSDT 0x00000000DAFF9000 0007A8 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[     1.000003] ACPI: HPET 0x00000000DAFE3000 000038 (v01 LENOVO TP-G2    00002770 PTL  00000002)
[     1.000003] ACPI: APIC 0x00000000DAFE2000 000098 (v01 LENOVO TP-G2    00002770 PTL  00000002)
[     1.000003] ACPI: MCFG 0x00000000DAFE1000 00003C (v01 LENOVO TP-G2    00002770 PTL  00000002)
[     1.000003] ACPI: ECDT 0x00000000DAFE0000 000052 (v01 LENOVO TP-G2    00002770 PTL  00000002)
[     1.000003] ACPI: FPDT 0x00000000DAFDF000 000064 (v01 LENOVO TP-G2    00002770 PTL  00000002)
[     1.000003] ACPI: ASF! 0x00000000DAFE6000 0000A5 (v32 LENOVO TP-G2    00002770 PTL  00000002)
[     1.000003] ACPI: UEFI 0x00000000DAFDE000 00003E (v01 LENOVO TP-G2    00002770 PTL  00000002)
[     1.000003] ACPI: UEFI 0x00000000DAFDD000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[     1.000003] ACPI: POAT 0x00000000DAFDC000 000055 (v03 LENOVO TP-G2    00002770 PTL  00000002)
[     1.000003] ACPI: SSDT 0x00000000DAFDB000 000C79 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[     1.000003] ACPI: SSDT 0x00000000DAFDA000 000A83 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[     1.000003] ACPI: UEFI 0x00000000DAFD9000 000292 (v01 LENOVO TP-G2    00002770 PTL  00000002)
[     1.000003] ACPI: DBG2 0x00000000DAFD8000 0000E9 (v00 LENOVO TP-G2    00002770 PTL  00000002)
[     1.000003] ACPI: 6 ACPI AML tables successfully acquired and loaded
[     1.000003] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
[     1.000003] cpu0 at mainbus0 apid 0
[     1.000003] cpu0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, id 0x306a9
[     1.000003] cpu0: package 0, core 0, smt 0
[     1.000003] cpu1 at mainbus0 apid 1
[     1.000003] cpu1: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, id 0x306a9
[     1.000003] cpu1: package 0, core 0, smt 1
[     1.000003] cpu2 at mainbus0 apid 2
[     1.000003] cpu2: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, id 0x306a9
[     1.000003] cpu2: package 0, core 1, smt 0
[     1.000003] cpu3 at mainbus0 apid 3
[     1.000003] cpu3: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, id 0x306a9
[     1.000003] cpu3: package 0, core 1, smt 1
[     1.000003] acpi0 at mainbus0: Intel ACPICA 20190405
[     1.000003] acpi0: X/RSDT: OemId <LENOVO,TP-G2   ,00002770>, AslId <PTL ,00000002>
[     1.000003] acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
[     1.000003] acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
[     1.000003] ACPI: Dynamic OEM Table Load:
[     1.000003] ACPI: SSDT 0xFFFFE7E680D52008 000A01 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[     1.000003] ACPI: Dynamic OEM Table Load:
[     1.000003] ACPI: SSDT 0xFFFFE7E680CD3808 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[     1.000003] ACPI: Dynamic OEM Table Load:
[     1.000003] ACPI: SSDT 0xFFFFE7E680CD2388 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[     1.000003] acpi0: SCI interrupting at int 9
[     1.000003] acpi0: fixed power button present
[     1.000003] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
[     1.036093] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
[     1.036093] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
[     1.036195] acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
[     1.036195] MEM (PNP0C01) at acpi0 not configured
[     1.036195] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
[     1.036195] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
[     1.036195] acpivga0 at acpi0 (VID): ACPI Display Adapter
[     1.036195] acpiout0 at acpivga0 (LCD0, 0x0400): ACPI Display Output Device
[     1.036195] acpiout0: brightness levels: [0-100]
[     1.036195] acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
[     1.036195] acpiout2 at acpivga0 (DVI0, 0x0300): ACPI Display Output Device
[     1.036195] acpiout3 at acpivga0 (DVI1, 0x0301): ACPI Display Output Device
[     1.036195] acpiout4 at acpivga0 (DVI2, 0x0302): ACPI Display Output Device
[     1.036195] acpiout5 at acpivga0 (DVI3, 0x0303): ACPI Display Output Device
[     1.036195] acpiout6 at acpivga0 (DVI4, 0x0304): ACPI Display Output Device
[     1.036195] acpiout7 at acpivga0 (DVI5, 0x0305): ACPI Display Output Device
[     1.036195] acpivga0: connected output devices:
[     1.036195] acpivga0:   0x0400 (acpiout0): Unknown Output Device, head 0
[     1.036195] SIO (PNP0C02) at acpi0 not configured
[     1.036195] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
[     1.036195] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
[     1.036195] spkr0 at pcppi1: PC Speaker
[     1.036195] wsbell at spkr0 not configured
[     1.036195] midi0 at pcppi1: PC speaker
[     1.036195] sysbeep0 at pcppi1
[     1.036195] pckbc1 at acpi0 (KBD, LEN0071) (kbd port): io 0x60,0x64 irq 1
[     1.036195] pckbc2 at acpi0 (MOU, LEN0020) (aux port): irq 12
[     1.036195] TPM (SMO1200) at acpi0 not configured
[     1.036195] acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
[     1.036195] acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
[     1.036195] WGSH (LEN0078) at acpi0 not configured
[     1.036195] thinkpad0 at acpi0 (HKEY, LEN0068)
[     1.036195] acpiwmi0 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface
[     1.036195] acpiwmibus at acpiwmi0 not configured
[     1.036195] acpiwmi1 at acpi0 (WMI2, PNP0C14-2): ACPI WMI Interface
[     1.036195] acpiwmibus at acpiwmi1 not configured
[     1.036195] acpiwmi2 at acpi0 (WMI3, PNP0C14-3): ACPI WMI Interface
[     1.036195] acpiwmibus at acpiwmi2 not configured
[     1.036195] acpitz0 at acpi0 (THM0)
[     1.036195] acpitz0: levels: critical 103.0 C, passive cooling
[     1.036195] ACPI: Enabled 4 GPEs in block 00 to 3F
[     1.036195] attimer1: attached to pcppi1
[     1.036195] pckbd0 at pckbc1 (kbd slot)
[     1.036195] pckbc1: using irq 1 for kbd slot
[     1.036195] wskbd0 at pckbd0: console keyboard
[     1.036195] pms0 at pckbc1 (aux slot)
[     1.036195] pms0: Synaptics touchpad version 8.1
[     1.036195] pms0: Extended W mode, Passthrough, Palm detect, One button click pad, Multi-finger Report, Multi-finger
[     1.036195] pckbc1: using irq 12 for aux slot
[     1.036195] wsmouse0 at pms0 mux 0
[     1.036195] pci0 at mainbus0 bus 0: configuration mode 1
[     1.036195] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[     1.036195] pchb0 at pci0 dev 0 function 0: vendor 8086 product 0154 (rev. 0x09)
[     1.036195] i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0166 (rev. 0x09)
[     1.036195] xhci0 at pci0 dev 20 function 0: vendor 8086 product 1e31 (rev. 0x04)
[     1.036195] xhci0: interrupting at msi0 vec 0
[     1.036195] xhci0: xHCI version 1.0
[     1.036195] usb0 at xhci0: USB revision 3.0
[     1.036195] usb1 at xhci0: USB revision 2.0
[     1.036195] vendor 8086 product 1e3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
[     1.036195] puc0 at pci0 dev 22 function 3: Intel 7 Series KT (com)
[     1.036195] com2 at puc0 port 0 (16550-compatible): ioaddr 0x60b0, interrupting at ioapic0 pin 19
[     1.036195] com2: ns16550a, working fifo
[     1.036195] wm0 at pci0 dev 25 function 0, 64-bit DMA: PCH2 LAN (82579LM) Controller (rev. 0x04)
[     1.036195] wm0: interrupting at msi1 vec 0
[     1.036195] wm0: PCI-Express bus
[     1.036195] wm0: 2048 words FLASH, version 0.13.3
[     1.036195] wm0: Ethernet address 3c:97:0e:93:a3:19
[     1.036195] wm0: 0x6a4080<FLASH,PCIE,ASF_FIRM,AMT,WOL,EEE>
[     1.036195] ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3
[     1.036195] ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[     1.036195] ehci0 at pci0 dev 26 function 0: vendor 8086 product 1e2d (rev. 0x04)
[     1.036195] ehci0: interrupting at ioapic0 pin 16
[     1.036195] ehci0: EHCI version 1.0
[     1.036195] usb2 at ehci0: USB revision 2.0
[     1.036195] hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
[     1.036195] hdaudio0: interrupting at msi2 vec 0
[     1.036195] hdafg0 at hdaudio0: vendor 10ec product 0269
[     1.036195] hdafg0: DAC00 2ch: Speaker [Built-In]
[     1.036195] hdafg0: DAC01 2ch: HP Out [Jack]
[     1.036195] hdafg0: ADC02 2ch: Mic In [Jack]
[     1.036195] hdafg0: ADC03 2ch: Mic In [Built-In]
[     1.036195] hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
[     1.036195] audio0 at hdafg0: playback, capture, full duplex, independent
[     1.036195] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[     1.036195] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
[     1.036195] spkr1 at audio0: PC Speaker (synthesized)
[     1.036195] wsbell at spkr1 not configured
[     1.036195] hdafg1 at hdaudio0: vendor 8086 product 2806
[     1.036195] hdafg1: DP00 8ch: Digital Out [Jack]
[     1.036195] hdafg1: DP01 8ch: Digital Out [Jack]
[     1.036195] hdafg1: DP02 8ch: Digital Out [Jack]
[     1.036195] hdafg1: 8ch/0ch 48000Hz PCM16*
[     1.036195] ppb0 at pci0 dev 28 function 0: vendor 8086 product 1e10 (rev. 0xc4)
[     1.036195] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[     1.036195] ppb0: link is x1 @ 2.5GT/s
[     1.036195] pci1 at ppb0 bus 2
[     1.036195] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.036195] sdhc0 at pci1 dev 0 function 0: vendor 1180 product e823 (rev. 0x04)
[     1.036195] sdhc0: interrupting at ioapic0 pin 16
[     1.036195] sdhc0: SDHC 3.0, rev 5, SDMA, 200000 kHz, HS SDR50 SDR104 HS200 3.3V, re-tuning mode 3, 512 byte blocks
[     1.036195] sdmmc0 at sdhc0 slot 0
[     1.036195] ppb1 at pci0 dev 28 function 1: vendor 8086 product 1e12 (rev. 0xc4)
[     1.036195] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[     1.036195] ppb1: link is x1 @ 2.5GT/s
[     1.036195] pci2 at ppb1 bus 3
[     1.036195] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.036195] iwn0 at pci2 dev 0 function 0: vendor 8086 product 0085 (rev. 0x34)
[     1.036195] iwn0: interrupting at msi3 vec 0
[     1.036195] iwn0: MIMO 2T2R, MoW, address 6c:88:14:47:f1:f0
[     1.036195] iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[     1.036195] iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[     1.036195] iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[     1.036195] ppb2 at pci0 dev 28 function 2: vendor 8086 product 1e14 (rev. 0xc4)
[     1.036195] ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[     1.036195] pci3 at ppb2 bus 4
[     1.036195] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.036195] ehci1 at pci0 dev 29 function 0: vendor 8086 product 1e26 (rev. 0x04)
[     1.036195] ehci1: interrupting at ioapic0 pin 23
[     1.036195] ehci1: EHCI version 1.0
[     1.036195] usb3 at ehci1: USB revision 2.0
[     1.036195] ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 1e55 (rev. 0x04)
[     1.036195] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
[     1.036195] ichlpcib0: 24-bit timer
[     1.036195] tco0 at ichlpcib0: TCO (watchdog) timer configured.
[     1.036195] tco0: Min/Max interval 1/367 seconds
[     1.036195] ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 1e03 (rev. 0x04)
[     1.036195] ahcisata0: 64-bit DMA
[     1.036195] ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xcf30ff65<SXS,EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SNCQ,S64A>
[     1.036195] ahcisata0: interrupting at msi4 vec 0
[     1.036195] atabus0 at ahcisata0 channel 0
[     1.036195] atabus1 at ahcisata0 channel 1
[     1.036195] atabus2 at ahcisata0 channel 4
[     1.036195] ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 1e22 (rev. 0x04)
[     1.036195] ichsmb0: interrupting at ioapic0 pin 18
[     1.036195] iic0 at ichsmb0: I2C bus
[     1.036195] isa0 at ichlpcib0
[     1.036195] tpm0 at isa0 iomem 0xfed40000-0xfed40fff irq 7
[     1.036195] tpm0: device 0x0000104a rev 0x4e
[     1.036195] acpicpu0 at cpu0: ACPI CPU
[     1.036195] acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
[     1.036195] acpicpu0: C2: FFH, lat  80 us, pow   350 mW
[     1.036195] acpicpu0: P0: FFH, lat  10 us, pow 35000 mW, 2601 MHz, turbo boost
[     1.036195] acpicpu0: P1: FFH, lat  10 us, pow 35000 mW, 2600 MHz
[     1.036195] acpicpu0: P2: FFH, lat  10 us, pow 33218 mW, 2500 MHz
[     1.036195] acpicpu0: P3: FFH, lat  10 us, pow 31470 mW, 2400 MHz
[     1.036195] acpicpu0: P4: FFH, lat  10 us, pow 29755 mW, 2300 MHz
[     1.036195] acpicpu0: P5: FFH, lat  10 us, pow 28074 mW, 2200 MHz
[     1.036195] acpicpu0: P6: FFH, lat  10 us, pow 26426 mW, 2100 MHz
[     1.036195] acpicpu0: P7: FFH, lat  10 us, pow 24816 mW, 2000 MHz
[     1.036195] acpicpu0: P8: FFH, lat  10 us, pow 23556 mW, 1900 MHz
[     1.036195] acpicpu0: P9: FFH, lat  10 us, pow 22002 mW, 1800 MHz
[     1.036195] acpicpu0: P10: FFH, lat  10 us, pow 20480 mW, 1700 MHz
[     1.036195] acpicpu0: P11: FFH, lat  10 us, pow 18989 mW, 1600 MHz
[     1.036195] acpicpu0: P12: FFH, lat  10 us, pow 17534 mW, 1500 MHz
[     1.036195] acpicpu0: P13: FFH, lat  10 us, pow 16106 mW, 1400 MHz
[     1.036195] acpicpu0: P14: FFH, lat  10 us, pow 15009 mW, 1300 MHz
[     1.036195] acpicpu0: P15: FFH, lat  10 us, pow 13638 mW, 1200 MHz
[     1.036195] acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
[     1.036195] acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
[     1.036195] acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
[     1.036195] acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
[     1.036195] acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
[     1.036195] acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
[     1.036195] acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
[     1.036195] acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
[     1.036195] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
[     1.036195] acpicpu1 at cpu1: ACPI CPU
[     1.036195] acpicpu2 at cpu2: ACPI CPU
[     1.036195] coretemp1 at cpu2: thermal sensor, 1 C resolution, Tjmax=105
[     1.036195] acpicpu3 at cpu3: ACPI CPU
[     1.036195] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[     1.702428] timecounter: Timecounter "TSC" frequency 2594358040 Hz quality 3000
[     1.708840] acpiacad0: AC adapter online.
[     1.708840] uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
[     1.708840] uhub0: 4 ports with 4 removable, self powered
[     1.708840] uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
[     1.708840] uhub1: 4 ports with 4 removable, self powered
[     1.712452] IPsec: Initialized Security Association Processing.
[     1.712452] acpibat0: SANYO LION rechargeable battery
[     1.712452] acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
[     1.722441] uhub2 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
[     1.722441] uhub2: 3 ports with 3 removable, self powered
[     1.722441] uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
[     1.722441] uhub3: 3 ports with 3 removable, self powered
[     1.802492] ahcisata0 port 0: device present, speed: 6.0Gb/s
[     3.363491] wd0 at atabus0 drive 0
[     3.363491] wd0: <WDC WDS240G2G0A-00JH30>
[     3.363491] wd0: drive supports 1-sector PIO transfers, LBA48 addressing
[     3.363491] wd0: 223 GB, 465141 cyl, 16 head, 63 sec, 512 bytes/sect x 468862128 sectors
[     3.363491] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags)
[     3.363491] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[     3.963875] uhub4 at uhub2 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
[     3.963875] uhub4: single transaction translator
[     3.963875] uhub5 at uhub3 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
[     3.963875] uhub5: single transaction translator
[     3.963875] uhub4: 6 ports with 6 removable, self powered
[     3.963875] uhub5: 8 ports with 8 removable, self powered
[     5.274714] ubt0 at uhub4 port 4
[     5.274714] ubt0: Broadcom Corp (0xa5c) BCM20702A0 (0x21e6), rev 2.00/1.12, addr 3
[     6.255342] uvideo0 at uhub4 port 6 configuration 1 interface 0: Ricoh Company Ltd. (0x5986) Integrated Camera (0x2d2), rev 2.00/0.11, addr 4
[     6.255342] video0 at uvideo0: Ricoh Company Ltd. (0x5986) Integrated Camera (0x2d2), rev 2.00/0.11, addr 4
[     6.255342] boot device: wd0
[     6.255342] root on wd0a dumps on wd0b
[     6.265349] root file system type: ffs
[     6.265349] kern.module.path=/stand/amd64/9.3/modules
[     6.265349] kern info: [drm] Memory usable by graphics device = 2048M
[     6.265349] kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[     6.265349] kern info: [drm] Driver supports precise vblank timestamp query.
[     6.265349] kern info: [drm] failed to find VBIOS tables
[     6.265349] i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
[     6.365412] kern info: [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[     6.425450] intelfb0 at i915drmkms0
[     6.425450] intelfb0: framebuffer at 0xffffae80aad65000, size 1366x768, depth 32, stride 5504
[     6.695623] kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/intel_fifo_underrun.c:230)cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
[     6.695623] kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/intel_fifo_underrun.c:381)intel_pch_fifo_underrun_irq_handler] *ERROR* PCH transcoder A FIFO underrun
[     7.245975] wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
[     7.259389] wsmux1: connecting to wsdisplay0
[    20.694582] wsdisplay0: screen 1 added (default, vt100 emulation)
[    20.694582] wsdisplay0: screen 2 added (default, vt100 emulation)
[    20.704588] wsdisplay0: screen 3 added (default, vt100 emulation)
[    20.704588] wsdisplay0: screen 4 added (default, vt100 emulation)
[    21.184897] bthub0 at ubt0 local-bdaddr f4:b7:e2:e9:4b:6f

~ λ xinput list-props 6
Device 'Mouse0':
        Device Enabled (138):   1
        Coordinate Transformation Matrix (140): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
        Device Accel Profile (252):     0
        Device Accel Constant Deceleration (253):       1.000000
        Device Accel Adaptive Deceleration (254):       1.000000
        Device Accel Velocity Scaling (255):    10.000000
        Device Node (256):      "/dev/wsmouse"
        Button Labels (257):    "Button Left" (141), "Button Middle" (142), "Button Right" (143), "Button Wheel Up" (144), "Button Wheel Down" (145), "Button Horiz Wheel Left" (146), "Button Horiz Wheel Right" (147), "Button Unknown" (251), "Button Unknown" (251)
        Mouse Middle Button Emulation (258):    1
        Mouse Middle Button Timeout (259):      50

rvp

pfr OK, so it's a Synaptics touchpad:

$ fgrep pms pfr-dmesg.txt 
[     1.036195] pms0 at pckbc1 (aux slot)
[     1.036195] pms0: Synaptics touchpad version 8.1
[     1.036195] pms0: Extended W mode, Passthrough, Palm detect, One button click pad, Multi-finger Report, Multi-finger
[     1.036195] wsmouse0 at pms0 mux 0
$

Can you post the output of:

sysctl hw.synaptics
xev -event button; then tap in the window, see if it is registers as Button 1 (press & release)
the /var/log/Xorg.0.log file
any custom Xorg config. files you use.

pfr

rvp

sysctl hw.synaptics

hw.synaptics.up_down_emulation = 3
hw.synaptics.up_down_motion_delta = 1
hw.synaptics.gesture_move = 200
hw.synaptics.gesture_length = 20
hw.synaptics.edge_left = 1632
hw.synaptics.edge_right = 5312
hw.synaptics.edge_top = 4288
hw.synaptics.edge_bottom = 1568
hw.synaptics.edge_motion_delta = 32
hw.synaptics.finger_high = 35
hw.synaptics.finger_low = 20
hw.synaptics.two_fingers_emulation = 0
hw.synaptics.scale_x = 16
hw.synaptics.scale_y = 16
hw.synaptics.scale_z = 32
hw.synaptics.max_speed_x = 32
hw.synaptics.max_speed_y = 32
hw.synaptics.max_speed_z = 2
hw.synaptics.movement_threshold = 4
hw.synaptics.movement_enable = 1
hw.synaptics.button_boundary = 2288
hw.synaptics.button2_edge = 2858
hw.synaptics.button3_edge = 4085
hw.synaptics.finger_scroll-min = 13
hw.synaptics.finger_scroll-max = 14
hw.synaptics.finger_scroll-hysteresis = 30
hw.synaptics.aux_mid_button_scroll = 1
hw.synaptics.debug = 0

~ λ xev -event button
Outer window is 0x1000001, inner window is 0x1000002

ButtonPress event, serial 25, synthetic NO, window 0x1000001,
    root 0x115, subw 0x1000002, time 1212880, (44,41), root:(48,60),
    state 0x0, button 1, same_screen YES

ButtonRelease event, serial 25, synthetic NO, window 0x1000001,
    root 0x115, subw 0x1000002, time 1213072, (44,41), root:(48,60),
    state 0x100, button 1, same_screen YES

/var/log/Xorg.0.log

[    63.683] 
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[    63.683] Build Operating System: NetBSD/amd64 9.3_STABLE - The NetBSD Foundation, Inc.
[    63.683] Current Operating System: NetBSD hackbox.local 9.3_STABLE NetBSD 9.3_STABLE (GENERIC) #0: Sun Nov  5 17:48:58 UTC 2023  mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC amd64
[    63.684] Build Date: 03 March 2019  07:11:23AM
[    63.684]  
[    63.684] Current version of pixman: 0.38.4
[    63.685] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    63.685] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    63.685] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 31 21:18:59 2024
[    63.689] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    63.690] (==) No Layout section.  Using the first Screen section.
[    63.690] (==) No screen section available. Using defaults.
[    63.690] (**) |-->Screen "Default Screen Section" (0)
[    63.690] (**) |   |-->Monitor "<default monitor>"
[    63.692] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    63.692] (==) Not automatically adding devices
[    63.692] (==) Not automatically enabling devices
[    63.692] (==) Not automatically adding GPU devices
[    63.693] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    63.693] (==) FontPath set to:
	/usr/X11R7/lib/X11/fonts/misc/,
	/usr/X11R7/lib/X11/fonts/TTF/,
	/usr/X11R7/lib/X11/fonts/Type1/,
	/usr/X11R7/lib/X11/fonts/75dpi/,
	/usr/X11R7/lib/X11/fonts/100dpi/
[    63.693] (==) ModulePath set to "/usr/X11R7/lib/modules"
[    63.694] (==) |-->Input Device "Mouse0"
[    63.694] (==) |-->Input Device "<default keyboard>"
[    63.694] (==) No Layout section. Using the first mouse device.
[    63.694] (==) No Layout section. Using the default keyboard configuration.
[    63.699] (II) Loader magic: 0x1b4e8fa60
[    63.699] (II) Module ABI versions:
[    63.699] 	X.Org ANSI C Emulation: 0.4
[    63.699] 	X.Org Video Driver: 24.0
[    63.699] 	X.Org XInput driver : 24.1
[    63.699] 	X.Org Server Extension : 10.0
[    63.707] (--) PCI:*(0@0:2:0) 8086:0166:17aa:21fa rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64
[    63.707] (II) LoadModule: "glx"
[    63.713] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[    63.719] (II) Module glx: vendor="X.Org Foundation"
[    63.719] 	compiled for 1.20.5, module version = 1.0.0
[    63.719] 	ABI class: X.Org Server Extension, version 10.0
[    63.720] (==) Matched intel as autoconfigured driver 0
[    63.720] (==) Matched modesetting as autoconfigured driver 1
[    63.720] (==) Matched vesa as autoconfigured driver 2
[    63.720] (==) Matched wsfb as autoconfigured driver 3
[    63.720] (==) Assigned the driver to the xf86ConfigLayout
[    63.720] (II) LoadModule: "intel"
[    63.721] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[    63.735] (II) Module intel: vendor="X.Org Foundation"
[    63.735] 	compiled for 1.20.5, module version = 2.99.917
[    63.735] 	Module class: X.Org Video Driver
[    63.735] 	ABI class: X.Org Video Driver, version 24.0
[    63.736] (II) LoadModule: "modesetting"
[    63.737] (II) Loading /usr/X11R7/lib/modules/drivers/modesetting_drv.so
[    63.739] (II) Module modesetting: vendor="X.Org Foundation"
[    63.739] 	compiled for 1.20.5, module version = 1.20.5
[    63.739] 	Module class: X.Org Video Driver
[    63.739] 	ABI class: X.Org Video Driver, version 24.0
[    63.739] (II) LoadModule: "vesa"
[    63.740] (II) Loading /usr/X11R7/lib/modules/drivers/vesa_drv.so
[    63.741] (II) Module vesa: vendor="X.Org Foundation"
[    63.741] 	compiled for 1.20.5, module version = 2.4.0
[    63.741] 	Module class: X.Org Video Driver
[    63.741] 	ABI class: X.Org Video Driver, version 24.0
[    63.741] (II) LoadModule: "wsfb"
[    63.742] (II) Loading /usr/X11R7/lib/modules/drivers/wsfb_drv.so
[    63.743] (II) Module wsfb: vendor="X.Org Foundation"
[    63.743] 	compiled for 1.20.5, module version = 0.4.0
[    63.743] 	ABI class: X.Org Video Driver, version 24.0
[    63.743] (II) LoadModule: "mouse"
[    63.744] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[    63.746] (II) Module mouse: vendor="X.Org Foundation"
[    63.746] 	compiled for 1.20.5, module version = 1.9.2
[    63.746] 	Module class: X.Org XInput Driver
[    63.746] 	ABI class: X.Org XInput driver, version 24.1
[    63.746] (II) LoadModule: "kbd"
[    63.746] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[    63.747] (II) Module kbd: vendor="X.Org Foundation"
[    63.747] 	compiled for 1.20.5, module version = 1.9.0
[    63.747] 	Module class: X.Org XInput Driver
[    63.747] 	ABI class: X.Org XInput driver, version 24.1
[    63.747] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    63.749] (II) intel: Driver for Intel(R) HD Graphics
[    63.749] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    63.749] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    63.750] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    63.750] (II) VESA: driver for VESA chipsets: vesa
[    63.750] (II) wsfb: driver for wsdisplay framebuffer: wsfb
[    63.750] (--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode (version 3.32)
[    63.750] (--) using VT number 5
[    63.762] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[    63.763] (WW) Falling back to old probe method for modesetting
[    63.763] (WW) Falling back to old probe method for wsfb
[    63.763] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    63.764] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[    63.764] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
[    63.764] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    63.764] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    63.764] (==) intel(0): RGB weight 888
[    63.764] (==) intel(0): Default visual is TrueColor
[    63.768] (II) intel(0): Output LVDS1 has no monitor section
[    63.769] (II) intel(0): Enabled output LVDS1
[    63.769] (II) intel(0): Output VGA1 has no monitor section
[    63.769] (II) intel(0): Enabled output VGA1
[    63.769] (II) intel(0): Output HDMI1 has no monitor section
[    63.769] (II) intel(0): Enabled output HDMI1
[    63.769] (II) intel(0): Output DP1 has no monitor section
[    63.769] (II) intel(0): Enabled output DP1
[    63.769] (II) intel(0): Output HDMI2 has no monitor section
[    63.769] (II) intel(0): Enabled output HDMI2
[    63.769] (II) intel(0): Output HDMI3 has no monitor section
[    63.769] (II) intel(0): Enabled output HDMI3
[    63.770] (II) intel(0): Output DP2 has no monitor section
[    63.770] (II) intel(0): Enabled output DP2
[    63.770] (II) intel(0): Output DP3 has no monitor section
[    63.770] (II) intel(0): Enabled output DP3
[    63.770] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    63.770] (II) intel(0): Output VIRTUAL1 has no monitor section
[    63.770] (II) intel(0): Enabled output VIRTUAL1
[    63.770] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[    63.770] (==) intel(0): TearFree enabled
[    63.770] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    63.770] (==) intel(0): DPI set to (96, 96)
[    63.770] (II) Loading sub module "dri2"
[    63.770] (II) LoadModule: "dri2"
[    63.770] (II) Module "dri2" already built-in
[    63.770] (II) UnloadModule: "modesetting"
[    63.770] (II) Unloading modesetting
[    63.770] (II) UnloadModule: "vesa"
[    63.770] (II) Unloading vesa
[    63.770] (II) UnloadModule: "wsfb"
[    63.771] (II) Unloading wsfb
[    63.782] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[    63.782] (==) intel(0): Backing store enabled
[    63.782] (==) intel(0): Silken mouse enabled
[    63.785] (II) intel(0): HW Cursor enabled
[    63.787] (==) intel(0): DPMS enabled
[    63.790] (II) intel(0): [DRI2] Setup complete
[    63.790] (II) intel(0): [DRI2]   DRI driver: i965
[    63.790] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    63.790] (II) intel(0): direct rendering: DRI2 enabled
[    63.790] (II) Initializing extension Generic Event Extension
[    63.791] (II) Initializing extension SHAPE
[    63.792] (II) Initializing extension MIT-SHM
[    63.793] (II) Initializing extension XInputExtension
[    63.795] (II) Initializing extension XTEST
[    63.796] (II) Initializing extension BIG-REQUESTS
[    63.797] (II) Initializing extension SYNC
[    63.798] (II) Initializing extension XKEYBOARD
[    63.801] (II) Initializing extension XC-MISC
[    63.801] (II) Initializing extension SECURITY
[    63.803] (II) Initializing extension XFIXES
[    63.804] (II) Initializing extension XFree86-Bigfont
[    63.805] (II) Initializing extension RENDER
[    63.806] (II) Initializing extension RANDR
[    63.807] (II) Initializing extension COMPOSITE
[    63.808] (II) Initializing extension DAMAGE
[    63.809] (II) Initializing extension MIT-SCREEN-SAVER
[    63.810] (II) Initializing extension DOUBLE-BUFFER
[    63.812] (II) Initializing extension RECORD
[    63.812] (II) Initializing extension DPMS
[    63.813] (II) Initializing extension Present
[    63.815] (II) Initializing extension X-Resource
[    63.816] (II) Initializing extension XVideo
[    63.817] (II) Initializing extension XVideo-MotionCompensation
[    63.817] (II) Initializing extension GLX
[    63.906] (II) AIGLX: Loaded and initialized i965
[    63.906] (II) GLX: Initialized DRI2 GL provider for screen 0
[    63.906] (II) Initializing extension XFree86-VidModeExtension
[    63.907] (II) Initializing extension XFree86-DGA
[    63.908] (II) Initializing extension XFree86-DRI
[    63.908] (II) Initializing extension DRI2
[    63.914] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[    63.915] (II) intel(0): Setting screen physical size to 361 x 203
[    64.247] (II) Using input driver 'mouse' for 'Mouse0'
[    64.247] (**) Option "CorePointer" "on"
[    64.247] (**) Mouse0: always reports core events
[    64.247] (**) Option "Device" "/dev/wsmouse"
[    64.247] (**) Mouse0: auto calibration enabled
[    64.247] (**) Mouse0: associated screen: 0
[    64.247] (==) Mouse0: Protocol: "WSMouse"
[    64.247] (**) Mouse0: always reports core events
[    64.716] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[    64.716] (**) Mouse0: ZAxisMapping: buttons 4 and 5
[    64.716] (**) Option "EmulateWheel" "on"
[    64.716] (**) Option "EmulateWheelButton" "2"
[    64.716] (**) Option "YAxisMapping" "5 4"
[    64.716] (**) Mouse0: YAxisMapping: buttons 5 and 4
[    64.716] (**) Mouse0: EmulateWheel, EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    64.716] (**) Mouse0: Buttons: 9
[    64.716] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE, id 6)
[    64.716] (**) Mouse0: (accel) keeping acceleration scheme 1
[    64.716] (**) Mouse0: (accel) acceleration profile 0
[    64.717] (**) Mouse0: (accel) acceleration factor: 2.000
[    64.717] (**) Mouse0: (accel) acceleration threshold: 4
[    65.178] (II) Using input driver 'kbd' for '<default keyboard>'
[    65.178] (**) Option "CoreKeyboard" "on"
[    65.178] (**) <default keyboard>: always reports core events
[    65.178] (**) <default keyboard>: always reports core events
[    65.178] (**) Option "Protocol" "standard"
[    65.178] (**) Option "XkbRules" "base"
[    65.178] (**) Option "XkbModel" "pc105"
[    65.178] (**) Option "XkbLayout" "us"
[    65.178] (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD, id 7)
[    65.797] (II) intel(0): EDID vendor "LGD", prod id 728
[    65.797] (II) intel(0): Printing DDC gathered Modelines:
[    65.797] (II) intel(0): Modeline "1366x768"x0.0   75.20  1366 1414 1478 1582  768 772 779 792 +hsync -vsync (47.5 kHz eP)