Hello!
Trying NetBSD for the first time, switching from Windows.. I Can´t change the screen res.
I'm a total beginner so please do not slaughter me.. I have tried to read to the problems but it does not work so well for me.. When I try X -configure i can´t start x, no screen found. I can start x without the xorg.conf, but then i only have 1024x768.
uname -a
NetBSD localhost 9.1 NetBSD 9.1 (GENERIC) #0: Sun Oct 18 19:24:30 UTC 2020 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC amd64
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 0.00*
cat .xinitrc
exec /usr/pkg/bin/i3
/etc/rc.conf
dhcpcd=YES
dhcpcd_flags="-qM wm0"
cgd=NO
raidframe=NO
wscons=YES
dbus=YES
famd=YES
hal=YES
devpubd=YES
pcictl pci0 list | grep -i nvidia
010:00:0: NVIDIA GeForce GTX 1050 Ti (VGA display, revision 0xa1)
010:00:1: NVIDIA product 0fb9 (mixed mode multimedia, revision 0xa1)
modstat
nouveau driver builtin - 1 - drmkms
nouveau_pci driver builtin - 0 - nouveau,drmkm
/var/run/dmesg.boot
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.1 (GENERIC) #0: Sun Oct 18 19:24:30 UTC 2020
mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 32697 MB
avail memory = 31721 MB
cpu_rng: RDSEED
rnd: seeded with 256 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: systbl at pa dc3c0018
System manufacturer System Product Name (System Version)
mainbus0 (root)
ACPI: RSDP 0x00000000DB1B0000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DB1B00A0 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DB1BF0B0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DB1B01E8 00EEC3 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DB66ED80 000040
ACPI: APIC 0x00000000DB1BF1C8 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DB1BF328 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DB1BF370 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DB1BF410 0000FC (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
ACPI: SSDT 0x00000000DB1BF510 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DB1C81A8 00378A (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000DB1CB938 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: SSDT 0x00000000DB1D0B68 0000BF (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: HPET 0x00000000DB1CB9D0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000DB1CBA08 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
ACPI: UEFI 0x00000000DB1CBA30 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: BGRT 0x00000000DB1CBA78 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: IVRS 0x00000000DB1CBAB0 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: SSDT 0x00000000DB1CBB80 002314 (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: CRAT 0x00000000DB1CDE98 000F50 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DB1CEDE8 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DB1CEE18 001D4A (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 17: pa 0xfec00000, version 0x21, 24 pins
ioapic0: autoconfiguration error: can't remap to apid 17
ioapic1 at mainbus0 apid 18: pa 0xfec01000, version 0x21, 32 pins
ioapic1: autoconfiguration error: can't remap to apid 18
cpu0 at mainbus0 apid 0
cpu0: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu1: package 0, core 1, smt 0
cpu2 at mainbus0 apid 4
cpu2: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu2: package 0, core 2, smt 0
cpu3 at mainbus0 apid 6
cpu3: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu3: package 0, core 3, smt 0
cpu4 at mainbus0 apid 8
cpu4: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu4: package 0, core 4, smt 0
cpu5 at mainbus0 apid 10
cpu5: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu5: package 0, core 5, smt 0
cpu6 at mainbus0 apid 12
cpu6: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu6: package 0, core 6, smt 0
cpu7 at mainbus0 apid 14
cpu7: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu7: package 0, core 7, smt 0
cpu8 at mainbus0 apid 1
cpu8: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu8: package 0, core 0, smt 1
cpu9 at mainbus0 apid 3
cpu9: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu9: package 0, core 1, smt 1
cpu10 at mainbus0 apid 5
cpu10: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu10: package 0, core 2, smt 1
cpu11 at mainbus0 apid 7
cpu11: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu11: package 0, core 3, smt 1
cpu12 at mainbus0 apid 9
cpu12: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu12: package 0, core 4, smt 1
cpu13 at mainbus0 apid 11
cpu13: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu13: package 0, core 5, smt 1
cpu14 at mainbus0 apid 13
cpu14: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu14: package 0, core 6, smt 1
cpu15 at mainbus0 apid 15
cpu15: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu15: package 0, core 7, smt 1
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
AMDN (PNP0C01) at acpi0 not configured
IOMA (PNP0C02) at acpi0 not configured
APSP (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
SIO1 (PNP0C02) at acpi0 not configured
S900 (PNP0C02) at acpi0 not configured
acpiwmi0 at acpi0 (WMI1, PNP0C14-MXM2): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
GPIO (AMDI0030) at acpi0 not configured
AWR0 (PNP0C02) at acpi0 not configured
ABR0 (PNP0C02) at acpi0 not configured
ABR1 (PNP0C02) at acpi0 not configured
ABR2 (PNP0C02) at acpi0 not configured
ABR3 (PNP0C02) at acpi0 not configured
ABR4 (PNP0C02) at acpi0 not configured
ABR5 (PNP0C02) at acpi0 not configured
ABR6 (PNP0C02) at acpi0 not configured
ABR7 (PNP0C02) at acpi0 not configured
AWR1 (PNP0C02) at acpi0 not configured
ABR8 (PNP0C02) at acpi0 not configured
ABR9 (PNP0C02) at acpi0 not configured
ABRA (PNP0C02) at acpi0 not configured
ABRB (PNP0C02) at acpi0 not configured
ABRC (PNP0C02) at acpi0 not configured
ABRD (PNP0C02) at acpi0 not configured
ABRE (PNP0C02) at acpi0 not configured
ABRF (PNP0C02) at acpi0 not configured
PTIO (AMDIF030) at acpi0 not configured
acpiwmi1 at acpi0 (AMW0, PNP0C14-ASUSWMI): ACPI WMI Interface
wmieeepc0 at acpiwmi1: Asus Eee PC WMI mappings
acpiwmi2 at acpi0 (AOD, PNP0C14-AOD): ACPI WMI Interface
acpiwmibus at acpiwmi2 not configured
ACPI: Enabled 1 GPEs in block 00 to 1F
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
amdsmn0 at pci0 dev 0 function 0: AMD System Management Network
amdzentemp0 at amdsmn0: AMD CPU Temperature Sensors (Family17h)
vendor 1022 product 1451 (IOMMU system) at pci0 dev 0 function 2 not configured
pchb0 at pci0 dev 1 function 0: vendor 1022 product 1452 (rev. 0x00)
ppb0 at pci0 dev 1 function 3: vendor 1022 product 1453 (rev. 0x00)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 8.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
xhci0 at pci1 dev 0 function 0: vendor 1022 product 43b9 (rev. 0x02)
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.10
usb0 at xhci0: USB revision 3.1
usb1 at xhci0: USB revision 2.0
ahcisata0 at pci1 dev 0 function 1: vendor 1022 product 43b5 (rev. 0x02)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.31, 8 ports, 32 slots, CAP 0xef36ff27<SXS,PSC,SSC,PMD,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
ahcisata0: interrupting at msi1 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
atabus6 at ahcisata0 channel 6
atabus7 at ahcisata0 channel 7
ppb1 at pci1 dev 0 function 2: vendor 1022 product 43b0 (rev. 0x02)
ppb1: PCI Express capability version 2 <Upstream Port of PCI-E Switch>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 0 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb2: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x2 @ 5.0GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
xhci1 at pci3 dev 0 function 0: vendor 1b21 product 1242 (rev. 0x00)
xhci1: interrupting at msi2 vec 0
xhci1: xHCI version 1.10
usb2 at xhci1: USB revision 3.0
usb3 at xhci1: USB revision 2.0
ppb3 at pci2 dev 2 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb3: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
ppb3: link is x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci4 dev 0 function 0: I211 Ethernet (COPPER) (rev. 0x03)
wm0: for TX and RX interrupting at msix3 vec 0 affinity to 1
wm0: for TX and RX interrupting at msix3 vec 1 affinity to 2
wm0: for LINK interrupting at msix3 vec 2
wm0: PCI-Express bus
wm0: 64 words iNVM, version 0.6
wm0: Ethernet address 60:45:cb:a0:9a:62
wm0: Copper
wm0: 0x4c614420<INVM,IOH_VALID,PCIE,NEWQUEUE,WOL,EEE,PLLWA,CLSEMWA,CRC_STRIP>
makphy0 at wm0 phy 1: I210 10/100/1000 media interface, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb4 at pci2 dev 3 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb4: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
ppb4: link is x1 @ 2.5GT/s
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 168c product 003e (miscellaneous network, revision 0x32) at pci5 dev 0 function 0 not configured
ppb5 at pci2 dev 4 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb5: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci2 dev 5 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb6: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
ppb7 at pci2 dev 6 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb7: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
ppb8 at pci2 dev 7 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb8: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
pchb1 at pci0 dev 2 function 0: vendor 1022 product 1452 (rev. 0x00)
pchb2 at pci0 dev 3 function 0: vendor 1022 product 1452 (rev. 0x00)
ppb9 at pci0 dev 3 function 1: vendor 1022 product 1453 (rev. 0x00)
ppb9: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
ppb9: link is x16 @ 2.5GT/s
pci10 at ppb9 bus 10
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
genfb0 at pci10 dev 0 function 0: vendor 10de product 1c82 (rev. 0xa1)
genfb0: framebuffer at 0xf1000000, size 1024x768, depth 32, stride 4096
genfb0: shadow framebuffer enabled, size 3072 KB
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at genfb0 not configured
hdaudio0 at pci10 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at msi4 vec 0
hdafg0 at hdaudio0: vendor 10de product 0080
hdafg0: DP00 8ch: Digital Out [Jack]
hdafg0: DP01 8ch: Digital Out [Jack]
hdafg0: DP02 8ch: Digital Out [Jack]
hdafg0: 8ch/0ch 48000Hz PCM16*
pchb3 at pci0 dev 4 function 0: vendor 1022 product 1452 (rev. 0x00)
pchb4 at pci0 dev 7 function 0: vendor 1022 product 1452 (rev. 0x00)
ppb10 at pci0 dev 7 function 1: vendor 1022 product 1454 (rev. 0x00)
ppb10: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
pci11 at ppb10 bus 11
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 1022 product 145a (non-essential instrumentation, subclass 0x00) at pci11 dev 0 function 0 not configured
vendor 1022 product 1456 (miscellaneous crypto) at pci11 dev 0 function 2 not configured
xhci2 at pci11 dev 0 function 3: vendor 1022 product 145c (rev. 0x00)
xhci2: interrupting at msi5 vec 0
xhci2: xHCI version 1.0
usb4 at xhci2: USB revision 3.0
usb5 at xhci2: USB revision 2.0
pchb5 at pci0 dev 8 function 0: vendor 1022 product 1452 (rev. 0x00)
ppb11 at pci0 dev 8 function 1: vendor 1022 product 1454 (rev. 0x00)
ppb11: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
pci12 at ppb11 bus 12
pci12: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 1022 product 1455 (non-essential instrumentation, subclass 0x00) at pci12 dev 0 function 0 not configured
ahcisata1 at pci12 dev 0 function 2: vendor 1022 product 7901 (rev. 0x51)
ahcisata1: 64-bit DMA
ahcisata1: AHCI revision 1.31, 1 port, 32 slots, CAP 0xf737ff00<PSC,SSC,PMD,FBSS,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
ahcisata1: interrupting at msi6 vec 0
atabus8 at ahcisata1 channel 0
hdaudio1 at pci12 dev 0 function 3: HD Audio Controller
hdaudio1: interrupting at msi7 vec 0
hdafg1 at hdaudio1: vendor 10ec product 1220
hdafg1: DAC00 6ch: Speaker [Jack], HP Out [Jack]
hdafg1: DIG01 2ch: SPDIF Out [Jack]
hdafg1: ADC02 2ch: Line In [Jack], Mic In [Jack]
hdafg1: ADC03 2ch: Mic In [Jack]
hdafg1: 6ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: playback, capture, full duplex, independent
audio0: slinear_le:16 6ch 48000Hz, blk 5760 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
piixpm0 at pci0 dev 20 function 0: vendor 1022 product 790b (rev. 0x59)
piixpm0: interrupting at SMI,
iic0 at piixpm0 port 0: I2C bus
iic1 at piixpm0 port 1: I2C bus
pcib0 at pci0 dev 20 function 3: vendor 1022 product 790e (rev. 0x51)
pchb6 at pci0 dev 24 function 0: vendor 1022 product 1460 (rev. 0x00)
pchb7 at pci0 dev 24 function 1: vendor 1022 product 1461 (rev. 0x00)
pchb8 at pci0 dev 24 function 2: vendor 1022 product 1462 (rev. 0x00)
pchb9 at pci0 dev 24 function 3: vendor 1022 product 1463 (rev. 0x00)
pchb10 at pci0 dev 24 function 4: vendor 1022 product 1464 (rev. 0x00)
pchb11 at pci0 dev 24 function 5: vendor 1022 product 1465 (rev. 0x00)
pchb12 at pci0 dev 24 function 6: vendor 1022 product 1466 (rev. 0x00)
pchb13 at pci0 dev 24 function 7: vendor 1022 product 1467 (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 0 mW
acpicpu0: C2: I/O, lat 400 us, pow 0 mW
acpicpu0: P0: FFH, lat 1 us, pow 4860 mW, 3600 MHz
acpicpu0: P1: FFH, lat 1 us, pow 4080 mW, 3200 MHz
acpicpu0: P2: FFH, lat 1 us, pow 1980 mW, 2200 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
acpicpu4 at cpu4: ACPI CPU
acpicpu5 at cpu5: ACPI CPU
acpicpu6 at cpu6: ACPI CPU
acpicpu7 at cpu7: ACPI CPU
acpicpu8 at cpu8: ACPI CPU
acpicpu9 at cpu9: ACPI CPU
acpicpu10 at cpu10: ACPI CPU
acpicpu11 at cpu11: ACPI CPU
acpicpu12 at cpu12: ACPI CPU
acpicpu13 at cpu13: ACPI CPU
acpicpu14 at cpu14: ACPI CPU
acpicpu15 at cpu15: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
autoconfiguration error: ERROR: 378 cycle TSC drift observed
uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 8 ports with 8 removable, self powered
uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 14 ports with 14 removable, self powered
uhub2 at usb2: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub4: 4 ports with 4 removable, self powered
uhub5 at usb5: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub5: 4 ports with 4 removable, self powered
IPsec: Initialized Security Association Processing.
ahcisata0 port 1: device present, speed: 6.0Gb/s
wd0 at atabus1 drive 0
wd0: <KINGSTON SHFS37A480G>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 447 GB, 930261 cyl, 16 head, 63 sec, 512 bytes/sect x 937703088 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO
wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
ubt0 at uhub1 port 2
ubt0: vendor 0b05 (0xb05) product 1825 (0x1825), rev 1.10/0.01, addr 1
uhidev0 at uhub1 port 9 configuration 1 interface 0
uhidev0: CHICONY (0x3f0) HP Basic USB Keyboard (0x24), rev 1.10/3.00, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 10 configuration 1 interface 0
uhidev1: Microsoft (0x45e) Basic Optical Mouse (0x84), rev 1.10/0.00, addr 3, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
WARNING: 3 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/9.1/modules
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
syncing disks... done
unmounted tmpfs on /var/shm type tmpfs
unmounted procfs on /proc type procfs
unmounted ptyfs on /dev/pts type ptyfs
unmounted kernfs on /kern type kernfs
unmounted tmpfs on /tmp type tmpfs
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.1 (GENERIC) #0: Sun Oct 18 19:24:30 UTC 2020
mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 32697 MB
avail memory = 31721 MB
cpu_rng: RDSEED
rnd: seeded with 256 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: systbl at pa dc3c0018
System manufacturer System Product Name (System Version)
mainbus0 (root)
ACPI: RSDP 0x00000000DB1B0000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DB1B00A0 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DB1BF0B0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DB1B01E8 00EEC3 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DB66ED80 000040
ACPI: APIC 0x00000000DB1BF1C8 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DB1BF328 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DB1BF370 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DB1BF410 0000FC (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
ACPI: SSDT 0x00000000DB1BF510 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DB1C81A8 00378A (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000DB1CB938 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: SSDT 0x00000000DB1D0B68 0000BF (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: HPET 0x00000000DB1CB9D0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000DB1CBA08 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
ACPI: UEFI 0x00000000DB1CBA30 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: BGRT 0x00000000DB1CBA78 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: IVRS 0x00000000DB1CBAB0 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: SSDT 0x00000000DB1CBB80 002314 (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: CRAT 0x00000000DB1CDE98 000F50 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DB1CEDE8 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DB1CEE18 001D4A (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 17: pa 0xfec00000, version 0x21, 24 pins
ioapic0: autoconfiguration error: can't remap to apid 17
ioapic1 at mainbus0 apid 18: pa 0xfec01000, version 0x21, 32 pins
ioapic1: autoconfiguration error: can't remap to apid 18
cpu0 at mainbus0 apid 0
cpu0: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu1: package 0, core 1, smt 0
cpu2 at mainbus0 apid 4
cpu2: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu2: package 0, core 2, smt 0
cpu3 at mainbus0 apid 6
cpu3: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu3: package 0, core 3, smt 0
cpu4 at mainbus0 apid 8
cpu4: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu4: package 0, core 4, smt 0
cpu5 at mainbus0 apid 10
cpu5: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu5: package 0, core 5, smt 0
cpu6 at mainbus0 apid 12
cpu6: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu6: package 0, core 6, smt 0
cpu7 at mainbus0 apid 14
cpu7: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu7: package 0, core 7, smt 0
cpu8 at mainbus0 apid 1
cpu8: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu8: package 0, core 0, smt 1
cpu9 at mainbus0 apid 3
cpu9: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu9: package 0, core 1, smt 1
cpu10 at mainbus0 apid 5
cpu10: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu10: package 0, core 2, smt 1
cpu11 at mainbus0 apid 7
cpu11: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu11: package 0, core 3, smt 1
cpu12 at mainbus0 apid 9
cpu12: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu12: package 0, core 4, smt 1
cpu13 at mainbus0 apid 11
cpu13: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu13: package 0, core 5, smt 1
cpu14 at mainbus0 apid 13
cpu14: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu14: package 0, core 6, smt 1
cpu15 at mainbus0 apid 15
cpu15: AMD Ryzen 7 1800X Eight-Core Processor , id 0x800f11
cpu15: package 0, core 7, smt 1
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
AMDN (PNP0C01) at acpi0 not configured
IOMA (PNP0C02) at acpi0 not configured
APSP (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
SIO1 (PNP0C02) at acpi0 not configured
S900 (PNP0C02) at acpi0 not configured
acpiwmi0 at acpi0 (WMI1, PNP0C14-MXM2): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
GPIO (AMDI0030) at acpi0 not configured
AWR0 (PNP0C02) at acpi0 not configured
ABR0 (PNP0C02) at acpi0 not configured
ABR1 (PNP0C02) at acpi0 not configured
ABR2 (PNP0C02) at acpi0 not configured
ABR3 (PNP0C02) at acpi0 not configured
ABR4 (PNP0C02) at acpi0 not configured
ABR5 (PNP0C02) at acpi0 not configured
ABR6 (PNP0C02) at acpi0 not configured
ABR7 (PNP0C02) at acpi0 not configured
AWR1 (PNP0C02) at acpi0 not configured
ABR8 (PNP0C02) at acpi0 not configured
ABR9 (PNP0C02) at acpi0 not configured
ABRA (PNP0C02) at acpi0 not configured
ABRB (PNP0C02) at acpi0 not configured
ABRC (PNP0C02) at acpi0 not configured
ABRD (PNP0C02) at acpi0 not configured
ABRE (PNP0C02) at acpi0 not configured
ABRF (PNP0C02) at acpi0 not configured
PTIO (AMDIF030) at acpi0 not configured
acpiwmi1 at acpi0 (AMW0, PNP0C14-ASUSWMI): ACPI WMI Interface
wmieeepc0 at acpiwmi1: Asus Eee PC WMI mappings
acpiwmi2 at acpi0 (AOD, PNP0C14-AOD): ACPI WMI Interface
acpiwmibus at acpiwmi2 not configured
ACPI: Enabled 1 GPEs in block 00 to 1F
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
amdsmn0 at pci0 dev 0 function 0: AMD System Management Network
amdzentemp0 at amdsmn0: AMD CPU Temperature Sensors (Family17h)
vendor 1022 product 1451 (IOMMU system) at pci0 dev 0 function 2 not configured
pchb0 at pci0 dev 1 function 0: vendor 1022 product 1452 (rev. 0x00)
ppb0 at pci0 dev 1 function 3: vendor 1022 product 1453 (rev. 0x00)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 8.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
xhci0 at pci1 dev 0 function 0: vendor 1022 product 43b9 (rev. 0x02)
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.10
usb0 at xhci0: USB revision 3.1
usb1 at xhci0: USB revision 2.0
ahcisata0 at pci1 dev 0 function 1: vendor 1022 product 43b5 (rev. 0x02)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.31, 8 ports, 32 slots, CAP 0xef36ff27<SXS,PSC,SSC,PMD,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
ahcisata0: interrupting at msi1 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
atabus6 at ahcisata0 channel 6
atabus7 at ahcisata0 channel 7
ppb1 at pci1 dev 0 function 2: vendor 1022 product 43b0 (rev. 0x02)
ppb1: PCI Express capability version 2 <Upstream Port of PCI-E Switch>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 0 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb2: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x2 @ 5.0GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
xhci1 at pci3 dev 0 function 0: vendor 1b21 product 1242 (rev. 0x00)
xhci1: interrupting at msi2 vec 0
xhci1: xHCI version 1.10
usb2 at xhci1: USB revision 3.0
usb3 at xhci1: USB revision 2.0
ppb3 at pci2 dev 2 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb3: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
ppb3: link is x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci4 dev 0 function 0: I211 Ethernet (COPPER) (rev. 0x03)
wm0: for TX and RX interrupting at msix3 vec 0 affinity to 1
wm0: for TX and RX interrupting at msix3 vec 1 affinity to 2
wm0: for LINK interrupting at msix3 vec 2
wm0: PCI-Express bus
wm0: 64 words iNVM, version 0.6
wm0: Ethernet address 60:45:cb:a0:9a:62
wm0: Copper
wm0: 0x4c614420<INVM,IOH_VALID,PCIE,NEWQUEUE,WOL,EEE,PLLWA,CLSEMWA,CRC_STRIP>
makphy0 at wm0 phy 1: I210 10/100/1000 media interface, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb4 at pci2 dev 3 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb4: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
ppb4: link is x1 @ 2.5GT/s
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 168c product 003e (miscellaneous network, revision 0x32) at pci5 dev 0 function 0 not configured
ppb5 at pci2 dev 4 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb5: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci2 dev 5 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb6: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
ppb7 at pci2 dev 6 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb7: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
ppb8 at pci2 dev 7 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb8: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
pchb1 at pci0 dev 2 function 0: vendor 1022 product 1452 (rev. 0x00)
pchb2 at pci0 dev 3 function 0: vendor 1022 product 1452 (rev. 0x00)
ppb9 at pci0 dev 3 function 1: vendor 1022 product 1453 (rev. 0x00)
ppb9: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
ppb9: link is x16 @ 2.5GT/s
pci10 at ppb9 bus 10
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
genfb0 at pci10 dev 0 function 0: vendor 10de product 1c82 (rev. 0xa1)
genfb0: framebuffer at 0xf1000000, size 1024x768, depth 32, stride 4096
genfb0: shadow framebuffer enabled, size 3072 KB
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at genfb0 not configured
hdaudio0 at pci10 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at msi4 vec 0
hdafg0 at hdaudio0: vendor 10de product 0080
hdafg0: DP00 8ch: Digital Out [Jack]
hdafg0: DP01 8ch: Digital Out [Jack]
hdafg0: DP02 8ch: Digital Out [Jack]
hdafg0: 8ch/0ch 48000Hz PCM16*
pchb3 at pci0 dev 4 function 0: vendor 1022 product 1452 (rev. 0x00)
pchb4 at pci0 dev 7 function 0: vendor 1022 product 1452 (rev. 0x00)
ppb10 at pci0 dev 7 function 1: vendor 1022 product 1454 (rev. 0x00)
ppb10: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
pci11 at ppb10 bus 11
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 1022 product 145a (non-essential instrumentation, subclass 0x00) at pci11 dev 0 function 0 not configured
vendor 1022 product 1456 (miscellaneous crypto) at pci11 dev 0 function 2 not configured
xhci2 at pci11 dev 0 function 3: vendor 1022 product 145c (rev. 0x00)
xhci2: interrupting at msi5 vec 0
xhci2: xHCI version 1.0
usb4 at xhci2: USB revision 3.0
usb5 at xhci2: USB revision 2.0
pchb5 at pci0 dev 8 function 0: vendor 1022 product 1452 (rev. 0x00)
ppb11 at pci0 dev 8 function 1: vendor 1022 product 1454 (rev. 0x00)
ppb11: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
pci12 at ppb11 bus 12
pci12: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 1022 product 1455 (non-essential instrumentation, subclass 0x00) at pci12 dev 0 function 0 not configured
ahcisata1 at pci12 dev 0 function 2: vendor 1022 product 7901 (rev. 0x51)
ahcisata1: 64-bit DMA
ahcisata1: AHCI revision 1.31, 1 port, 32 slots, CAP 0xf737ff00<PSC,SSC,PMD,FBSS,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
ahcisata1: interrupting at msi6 vec 0
atabus8 at ahcisata1 channel 0
hdaudio1 at pci12 dev 0 function 3: HD Audio Controller
hdaudio1: interrupting at msi7 vec 0
hdafg1 at hdaudio1: vendor 10ec product 1220
hdafg1: DAC00 6ch: Speaker [Jack], HP Out [Jack]
hdafg1: DIG01 2ch: SPDIF Out [Jack]
hdafg1: ADC02 2ch: Line In [Jack], Mic In [Jack]
hdafg1: ADC03 2ch: Mic In [Jack]
hdafg1: 6ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: playback, capture, full duplex, independent
audio0: slinear_le:16 6ch 48000Hz, blk 5760 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
piixpm0 at pci0 dev 20 function 0: vendor 1022 product 790b (rev. 0x59)
piixpm0: interrupting at SMI,
iic0 at piixpm0 port 0: I2C bus
iic1 at piixpm0 port 1: I2C bus
pcib0 at pci0 dev 20 function 3: vendor 1022 product 790e (rev. 0x51)
pchb6 at pci0 dev 24 function 0: vendor 1022 product 1460 (rev. 0x00)
pchb7 at pci0 dev 24 function 1: vendor 1022 product 1461 (rev. 0x00)
pchb8 at pci0 dev 24 function 2: vendor 1022 product 1462 (rev. 0x00)
pchb9 at pci0 dev 24 function 3: vendor 1022 product 1463 (rev. 0x00)
pchb10 at pci0 dev 24 function 4: vendor 1022 product 1464 (rev. 0x00)
pchb11 at pci0 dev 24 function 5: vendor 1022 product 1465 (rev. 0x00)
pchb12 at pci0 dev 24 function 6: vendor 1022 product 1466 (rev. 0x00)
pchb13 at pci0 dev 24 function 7: vendor 1022 product 1467 (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 0 mW
acpicpu0: C2: I/O, lat 400 us, pow 0 mW
acpicpu0: P0: FFH, lat 1 us, pow 4860 mW, 3600 MHz
acpicpu0: P1: FFH, lat 1 us, pow 4080 mW, 3200 MHz
acpicpu0: P2: FFH, lat 1 us, pow 1980 mW, 2200 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
acpicpu4 at cpu4: ACPI CPU
acpicpu5 at cpu5: ACPI CPU
acpicpu6 at cpu6: ACPI CPU
acpicpu7 at cpu7: ACPI CPU
acpicpu8 at cpu8: ACPI CPU
acpicpu9 at cpu9: ACPI CPU
acpicpu10 at cpu10: ACPI CPU
acpicpu11 at cpu11: ACPI CPU
acpicpu12 at cpu12: ACPI CPU
acpicpu13 at cpu13: ACPI CPU
acpicpu14 at cpu14: ACPI CPU
acpicpu15 at cpu15: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
autoconfiguration error: ERROR: 756 cycle TSC drift observed
uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 8 ports with 8 removable, self powered
uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 14 ports with 14 removable, self powered
uhub2 at usb2: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub4: 4 ports with 4 removable, self powered
uhub5 at usb5: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub5: 4 ports with 4 removable, self powered
IPsec: Initialized Security Association Processing.
ahcisata0 port 1: device present, speed: 6.0Gb/s
wd0 at atabus1 drive 0
wd0: <KINGSTON SHFS37A480G>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 447 GB, 930261 cyl, 16 head, 63 sec, 512 bytes/sect x 937703088 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO
wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
ubt0 at uhub1 port 2
ubt0: vendor 0b05 (0xb05) product 1825 (0x1825), rev 1.10/0.01, addr 1
uhidev0 at uhub1 port 9 configuration 1 interface 0
uhidev0: CHICONY (0x3f0) HP Basic USB Keyboard (0x24), rev 1.10/3.00, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 10 configuration 1 interface 0
uhidev1: Microsoft (0x45e) Basic Optical Mouse (0x84), rev 1.10/0.00, addr 3, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
WARNING: 3 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/9.1/modules
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
bash-5.0$ ö
