Hardware acceleration for Kabini (Southern Islands) APU

byteporter

Edit: Just realized I'm a doofus and the GCN 2 is actually Sea Islands. So everywhere I said Southern Islands I really meant Sea Islands.

Hi guys, longtime Slackware-current user here trying out NetBSD for the first time. A couple months ago I bought a pile of old Wyse-5020 thin clients on the cheap off of eBay. These machines are actually pretty beefy as thin clients go, build around an AMD quad core 1.5GHz Kabini SoC with 4GB of DDR3 and a 16GB SATA DOM.

The SoC is a GX-415GA which is the "Embedded" segment variant of Kabini. I figured these would be good for test driving some OSes that I've been interested in so that's what I've been trying lately. NetBSD in particular is one I've wanted to take for an extensive test drive for some time now.

I installed NetBSD-9.1 on there and it was very easy. Initially I had it set up for UEFI and it would try to initialize the graphics chip on startup but fail with errors related to VCE (which I believe is the hardware video support) IIRC. Same in UEFI/Legacy "Both" mode. However, in Legacy mode everything seems to initialize just fine. Here is the relevant output from dmesg

[     8.835910] kern info: [drm] initializing kernel modesetting (KABINI 0x1002:0x9833 0x1002:0x0123).
[     8.835910] kern info: [drm] register mmio base: 0xf0900000
[     8.835910] kern info: [drm] register mmio size: 262144
[     8.835910] kern info: [drm] doorbell mmio base: 0xF0000000
[     8.835910] kern info: [drm] doorbell mmio size: 8388608
[     8.835910] kern info: ATOM BIOS: AMD
[     8.835910] radeon0: info: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[     8.835910] radeon0: info: GTT: 2048M 0x0000000020000000 - 0x000000009FFFFFFF
[     8.835910] kern info: [drm] Detected VRAM RAM=200M, BAR=256M
[     8.835910] kern info: [drm] RAM width 128bits DDR
[     8.835910] Zone  kernel: Available graphics memory: 970712 kiB
[     8.835910] kern info: [drm] radeon: 512M of VRAM memory ready
[     8.835910] kern info: [drm] radeon: 2048M of GTT memory ready.
[     8.835910] kern info: [drm] Loading kabini Microcode
[     8.845914] kern info: [drm] Internal thermal controller without fan control
[     8.845914] kern info: [drm] radeon: dpm initialized
[     8.845914] kern info: [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[     8.845914] kern info: [drm] GART: num cpu pages 524288, num gpu pages 524288
[     8.885929] kern info: [drm] PCIE GART of 2048M enabled (table at 0x0000000000324000).
[     8.885929] radeon0: info: WB enabled            
[     8.885929] radeon0: info: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x0xfffff4c6f7fa4c00
[     8.885929] radeon0: info: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0x0xfffff4c6f7fa4c04
[     8.885929] radeon0: info: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0x0xfffff4c6f7fa4c08
[     8.885929] radeon0: info: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x0xfffff4c6f7fa4c0c
[     8.885929] radeon0: info: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0x0xfffff4c6f7fa4c10
[     8.885929] radeon0: info: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0x0xffffd4005e816c98
[     8.885929] radeon0: info: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0x0xfffff4c6f7fa4c18
[     8.885929] radeon0: info: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0x0xfffff4c6f7fa4c1c
[     8.885929] kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[     8.885929] kern info: [drm] Driver supports precise vblank timestamp query.
[     8.885929] radeon0: interrupting at ioapic1 pin 20 (radeon0)
[     8.885929] kern info: [drm] radeon: irq initialized.
[     8.885929] kern info: [drm] ring test on 0 succeeded in 3 usecs
[     8.885929] kern info: [drm] ring test on 1 succeeded in 3 usecs
[     8.885929] kern info: [drm] ring test on 2 succeeded in 3 usecs
[     8.885929] kern info: [drm] ring test on 3 succeeded in 4 usecs
[     8.885929] kern info: [drm] ring test on 4 succeeded in 4 usecs
[     8.935942] kern info: [drm] ring test on 5 succeeded in 1 usecs
[     8.955949] kern info: [drm] UVD initialized successfully.
[     9.065987] kern info: [drm] ring test on 6 succeeded in 16 usecs
[     9.065987] kern info: [drm] ring test on 7 succeeded in 3 usecs
[     9.065987] kern info: [drm] VCE initialized successfully.
[     9.065987] kern info: [drm] ib test on ring 0 succeeded in 0 usecs
[     9.566161] kern info: [drm] ib test on ring 1 succeeded in 0 usecs
[    10.066330] kern info: [drm] ib test on ring 2 succeeded in 0 usecs
[    10.066330] kern info: [drm] ib test on ring 3 succeeded in 0 usecs
[    10.066330] kern info: [drm] ib test on ring 4 succeeded in 0 usecs
[    10.586662] kern info: [drm] ib test on ring 5 succeeded
[    10.606668] kern info: [drm] ib test on ring 6 succeeded
[    10.606668] kern info: [drm] ib test on ring 7 succeeded
[    10.606668] kern info: [drm] Radeon Display Connectors
[    10.606668] kern info: [drm] Connector 0:
[    10.606668] kern info: [drm]   DP-1
[    10.606668] kern info: [drm]   HPD2
[    10.606668] kern info: [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[    10.606668] kern info: [drm]   Encoders:
[    10.606668] kern info: [drm]     DFP1: INTERNAL_UNIPHY
[    10.606668] kern info: [drm] Connector 1:
[    10.606668] kern info: [drm]   DVI-D-1
[    10.606668] kern info: [drm]   HPD1
[    10.606668] kern info: [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[    10.606668] kern info: [drm]   Encoders:
[    10.606668] kern info: [drm]     DFP2: INTERNAL_UNIPHY
[    10.606668] kern info: [drm] Connector 2:
[    10.606668] kern info: [drm]   VGA-1
[    10.606668] kern info: [drm]   DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[    10.606668] kern info: [drm]   Encoders:
[    10.606668] kern info: [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    10.676692] radeondrmkmsfb0 at radeon0
[    10.686695] radeondrmkmsfb0: framebuffer at 0xffffd4005f2ac000, size 3840x2160, depth 32, stride 15360
[    10.696699] hdafg0:   ELD version=0x2,len=172,edid=0x0,port=0xffffffff80249944,vendor=0x0020,product=0x0000
[    10.696699] hdafg0:   Monitor = ''
[    10.696699] hdafg0:   SAD id=0,format=0,channels=1,rate=0x00,maxbitrate=0
[    10.696699] hdafg0:   SAD id=1,format=0,channels=1,rate=0x60,maxbitrate=168000
[    10.696699] hdafg0:   SAD id=2,format=5,channels=4,rate=0x5e,maxbitrate=0
[    10.696699] hdafg0:   SAD id=3,format=10,channels=5,rate=0xff,maxbitrate=2040000
[    10.696699] hdafg0:   SAD id=4,format=0,channels=1,rate=0x00,maxbitrate=0
[    10.696699] hdafg0:   SAD id=5,format=0,channels=1,rate=0x00,maxbitrate=0
[    10.696699] hdafg0:   SAD id=6,format=0,channels=1,rate=0x00,maxbitrate=0
[    10.696699] hdafg0:   SAD id=7,format=0,channels=1,rate=0x00,maxbitrate=0
[    10.696699] hdafg0:   SAD id=8,format=0,channels=1,rate=0x00,maxbitrate=0
[    10.696699] hdafg0:   SAD id=9,format=0,channels=1,rate=0x00,maxbitrate=0
[    10.696699] hdafg0:   SAD id=10,format=0,channels=1,rate=0x00,maxbitrate=0
[    10.696699] hdafg0:   SAD id=11,format=0,channels=1,rate=0x00,maxbitrate=0
[    10.696699] hdafg0:   SAD id=12,format=0,channels=1,rate=0x00,maxbitrate=0
[    10.786729] wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0

So great I'm thinking! Kernel driver seems to support this GPU and I get a /dev/dri/card0 device. On to Xorg! I installed my wm of choice (Window Maker but I don't think it's particularly relevant to the issue of getting the GPU working) and fired up X. It gives me a desktop with no issues and at the "best" supported resolution to boot (4K@30Hz though IMO 30Hz is useless and I always change to 1920x1080@60Hz)!

However, I can tell right away that it's not accelerated by the way the windows tear when moving them around and the just slight sluggishness of the whole thing. I know that this is usable, but this is something that bugs the heck out of me on a desktop machine and is a bit of a dealbreaker, reminds me of the difference between playing an NES on an old CRT vs a newer LCD TV. Some people don't notice enough to care or just get used to it, but there is definitely a difference in feel. I'd be happy to post the full Xorg log if necessary but the short of it is that it uses the radeon driver which seems correct (and lists KABINI clearly near the end of the long list of supported chips) but it seems like perhaps some other library in the stack doesn't have the necessary support. I think the relevant output is this:

[ 41673.160] (II) Loading sub module "dri2"
[ 41673.160] (II) LoadModule: "dri2"
[ 41673.160] (II) Module "dri2" already built-in
[ 41673.226] (II) Loading sub module "glamoregl"
[ 41673.226] (II) LoadModule: "glamoregl"
[ 41673.229] (II) Loading /usr/X11R7/lib/modules/libglamoregl.so
[ 41673.230] (II) Module glamoregl: vendor="X.Org Foundation"
[ 41673.230]    compiled for 1.20.5, module version = 1.0.1
[ 41673.230]    ABI class: X.Org ANSI C Emulation, version 0.4
[ 41673.300] (II) RADEON(0): Refusing to try glamor on llvmpipe
[ 41673.302] (EE) RADEON(0): glamor detected, failed to initialize EGL.
...
[ 41673.433] (WW) RADEON(0): Direct rendering disabled
...
[ 41673.463] (II) Initializing extension GLX
[ 41673.464] (II) AIGLX: Screen 0 is not DRI2 capable
[ 41673.478] (II) IGLX: Loaded and initialized swrast
[ 41673.478] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 41673.478] (II) Initializing extension XFree86-VidModeExtension
[ 41673.479] (II) Initializing extension XFree86-DGA
[ 41673.480] (II) Initializing extension XFree86-DRI
[ 41673.480] (II) Initializing extension DRI2

If I use X -configure to generate a config file, it sets the driver to amdgpu instead, which surprised me as I thought it would detect it the same way as it does when you start X with no config file. It also seems to incorrectly detect the sound card device of the GPU as another graphics card, so I deleted that Device and its associated Screen and try to launch X with those settings. The X -configure command will output this error when it runs:

(II) AMDGPU(0): [KMS] Kernel modesetting enabled.
amdgpu_device_initialize: DRM version is 2.43.0 but this driver is only compatible with 3.x.x.
(II) AMDGPU(1): [KMS] drm report modesetting isn't supported.

I think the AMDGPU(1) is talking about the misidentified sound portion but the other part seems relevant. I suspect it's because I don't actually have the amdgpu module set up on NetBSD? Anyway, trying to launch X with this configuration fails.

Taking this configuration and changing the driver to radeon does launch, but is unaccelerated just like the no config. Changing the driver to modesetting also launches, but unaccelerated. In both cases it produces the same error about "Refusing to try glamor on llvmpipe" and "glamor initialization failed".

The GPU is a GCN 2 design and identifies itself as "HD 8330E". I think it's a bit of an oddball GPU in that it is supported by both the radeon kernel module and the amdgpu kernel module on Linux. It defaults to radeon but I always switch it to use amdgpu with the options (one disable Southern Islands on the radeon module and one enables it on the amdgpu module) because it allows for Vulkan support. Other than Vulkan it should work just fine. amdgpu support for Southern Islands is currently listed as experimental but I haven't had any issues on Linux.

I have tried this same machine on FreeBSD-12.1 and was able to get hardware accelerated X rather easily by adding a line to load their amdgpu to rc.conf. I also tried their radeonkms driver just to see and it didn't log errors when it loaded but the console stayed at VGA resolution and X was unaccelerated. It might be that I just need to configure something to make that work but I didn't bother since amdgpu is working just fine there.

So I guess I feel like I'm at the point where it would be extremely helpful to just ask and see if someone can point me in the correct direction of where to go next with this. From what I gather, amdgpu is in NetBSD-current but I'm not sure how new it is. I looked in the NetBSD source in github and it seems like it hasn't been touched in quite some time (1-2 years?) but I know NetBSD is actually using CVS for source control and I'm not sure how well the commit history translates over to git. In any case, I feel like the kernel driver is working just fine. I did make a USB boot stick for NetBSD-current but it hangs when booting and I haven't attempted to resolve that issue.

I had the idea to try glmark2 as I recall it can be built to run directly on dri without X but the one in pkgin doesn't seem to be built with that support and I haven't tried compiling it myself yet, but that may be a good way to test if the kernel module is working properly.

From reading around it sounds like the modular xorg is a bit more up to date but I'm not sure how to actually install it. The "how to install modular xorg" starts with assuming you didn't install the X11 sets but as far as I can tell doesn't tell you how to remove them if you did. It's not clear to me if it's just some trivial command to remove a set from the base system or if it would be a tedious manual task. I'd rather not have to reinstall the OS if someone with more experience can tell that that's unlikely to be the issue anyway.

Appreciate any help I can get and looking forward to contributing to the community!

rvp

byteporter Looks like radeon DRMKMS driver loaded OK, but, X, for some reason, is not using it.

Can you try the latest -CURRENT image? It has Xorg 1.20.10 (while NetBSD-9.1 has 1.20.5).
Post complete a) dmesg (or /var/run/dmesg.boot) output, b) /var/log/Xorg.log, and c) xorg.conf

byteporter

rvp No problem, I thought about pasting in the whole logs above but wasn't sure how they would display and whether or not giant chunks of text like that were frowned upon here.

I tried to boot NetBSD-9.99.77 from a USB stick but it locked up during the boot as far as I can tell. I guess it could have also been an issue with the graphics driver if it loaded it and tried switching to an invalid mode or something. I'm not sure if current has amdgpu built in and tried to use it or if amdgpu is something you need to build custom after installation. I'll see if I can find a serial port header inside this thing and see if I can reboot it with a serial console maybe.

Here are the requested logs. The Xorg.0.log is with no configuration file but I've attached the results of X -configure which wants to use the amdgpu driver (which I think means the Xorg driver and not the kernel module? Not totally clear on that.). However this config completely fails to launch unless I change the driver in the file to radeon and get rid of the config for PCI device 1.1 which is the sound function of the device that seems to be incorrectly detected as another GPU.

/var/run/dmesg.boot

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 9.1 (GENERIC) #0: Sun Oct 18 19:24:30 UTC 2020
	mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 3530 MB
avail memory = 3404 MB
rnd: seeded with 256 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
WYSE DQ Class (Rev 1)
mainbus0 (root)
ACPI: RSDP 0x00000000000F0120 000024 (v02 WYSE  )
ACPI: XSDT 0x00000000BEC7C200 000084 (v01 WYSE   WYSEACPI 00000003 WYSE 0100000D)
ACPI: FACP 0x00000000BEC7A000 00010C (v05 WYSE   WYSEACPI 00000003 WYSE 0100000D)
ACPI: DSDT 0x00000000BEC71000 005887 (v01 WYSE   AMD      00001000 INTL 20110316)
ACPI: FACS 0x00000000BEBC7000 000040
ACPI: HPET 0x00000000BEC79000 000038 (v01 WYSE   WYSEACPI 00000003 WYSE 0100000D)
ACPI: APIC 0x00000000BEC78000 000090 (v02 WYSE   WYSEACPI 00000003 WYSE 0100000D)
ACPI: MCFG 0x00000000BEC77000 00003C (v01 WYSE   WYSEACPI 00000003 WYSE 0100000D)
ACPI: UEFI 0x00000000BEC70000 000042 (v01 WYSE   WYSEACPI 00000003 WYSE 0100000D)
ACPI: POAT 0x00000000BEBA3000 000055 (v03 WYSE   WYSEACPI 00000003 WYSE 0100000D)
ACPI: BATB 0x00000000BEC6F000 000046 (v01 WYSE   WYSEACPI 00000003 WYSE 0100000D)
ACPI: SSDT 0x00000000BEC6E000 000B10 (v01 AMD    AGESA    00000001 AMD  00000001)
ACPI: SSDT 0x00000000BEC69000 004935 (v02 AMD    AGESA    00000002 MSFT 04000000)
ACPI: FPDT 0x00000000BEC68000 000044 (v01 WYSE   WYSEACPI 00000003 WYSE 0100000D)
ACPI: UEFI 0x00000000BEC67000 00017A (v01 WYSE   WYSEACPI 00000003 WYSE 0100000D)
ACPI: SSDT 0x00000000BEC65000 0010C2 (v01 AMD    CPMCMN   00000001 INTL 20110316)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x21, 24 pins
ioapic1 at mainbus0 apid 5: pa 0xfec01000, version 0x21, 32 pins
cpu0 at mainbus0 apid 0
cpu0: AMD GX-415GA SOC with Radeon(tm) HD Graphics   , id 0x700f01
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: AMD GX-415GA SOC with Radeon(tm) HD Graphics   , id 0x700f01
cpu1: package 0, core 1, smt 0
cpu2 at mainbus0 apid 2
cpu2: AMD GX-415GA SOC with Radeon(tm) HD Graphics   , id 0x700f01
cpu2: package 0, core 2, smt 0
cpu3 at mainbus0 apid 3
cpu3: AMD GX-415GA SOC with Radeon(tm) HD Graphics   , id 0x700f01
cpu3: package 0, core 3, smt 0
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <WYSE  ,WYSEACPI,00000003>, AslId <WYSE,0100000d>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
MEMR (PNP0C02) at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
SYSR (PNP0C02) at acpi0 not configured
MEM (PNP0C01) at acpi0 not configured
acpivga0 at acpi0 (VGA): ACPI Display Adapter
acpiout0 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
Firmware Error (ACPI): Could not resolve symbol [\_SB.PCI0.VGA.LCD._BCM.AFN7], AE_NOT_FOUND (20190405/psargs-395)
ACPI Error: Aborting method \_SB.PCI0.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20190405/psparse-581)
acpiout0: autoconfiguration error: failed to evaluate \_SB_.PCI0.VGA_.LCD_._BCM: AE_NOT_FOUND
acpivga0: connected output devices:
acpivga0:   0x0100: Ext. Monitor, head 0, bios detect
acpivga0:   0x0110 (acpiout0): LCD Panel, head 0, bios detect
acpivga0:   0x0200: TV, head 0
acpivga0:   0x0210: Unknown Output Device, head 0, bios detect
acpivga0:   0x0220: Unknown Output Device, head 0, bios detect
AWR0 (PNP0C02) at acpi0 not configured
ABR0 (PNP0C02) at acpi0 not configured
ABR1 (PNP0C02) at acpi0 not configured
ABR2 (PNP0C02) at acpi0 not configured
ABR3 (PNP0C02) at acpi0 not configured
ABR4 (PNP0C02) at acpi0 not configured
ACPI: Enabled 1 GPEs in block 00 to 1F
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 1022 product 1536 (rev. 0x00)
radeon0 at pci0 dev 1 function 0: vendor 1002 product 9833 (rev. 0x00)
hdaudio0 at pci0 dev 1 function 1: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdafg0 at hdaudio0: vendor 1002 product aa01
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
pchb1 at pci0 dev 2 function 0: vendor 1022 product 1538 (rev. 0x00)
ppb0 at pci0 dev 2 function 3: vendor 1022 product 1439 (rev. 0x00)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 5.0GT/s
ppb0: link is x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci1 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x06)
re0: interrupting at msix1 vec 0
re0: Ethernet address 00:80:64:fa:60:56
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8211E 1000BASE-T media interface
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
xhci0 at pci0 dev 16 function 0: vendor 1022 product 7814 (rev. 0x01)
xhci0: interrupting at msix2 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
ahcisata0 at pci0 dev 17 function 0: vendor 1022 product 7801 (rev. 0x40)
ahcisata0: 64-bit DMA
ahcisata0: ignoring broken port multiplier support
ahcisata0: AHCI revision 1.30, 1 port, 32 slots, CAP 0xf731ff00<PSC,SSC,PMD,FBSS,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
ahcisata0: interrupting at msi3 vec 0
atabus0 at ahcisata0 channel 0
ohci0 at pci0 dev 18 function 0: vendor 1022 product 7807 (rev. 0x39)
ohci0: interrupting at ioapic0 pin 18
ohci0: OHCI version 1.0, legacy support
usb2 at ohci0: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 1022 product 7808 (rev. 0x39)
ehci0: interrupting at ioapic0 pin 17
ehci0: EHCI version 1.0
ehci0: 1 companion controller, 4 ports: ohci0
usb3 at ehci0: USB revision 2.0
ohci1 at pci0 dev 19 function 0: vendor 1022 product 7807 (rev. 0x39)
ohci1: interrupting at ioapic0 pin 18
ohci1: OHCI version 1.0, legacy support
usb4 at ohci1: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 1022 product 7808 (rev. 0x39)
ehci1: interrupting at ioapic0 pin 17
ehci1: EHCI version 1.0
ehci1: 1 companion controller, 4 ports: ohci1
usb5 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 1022 product 780b (rev. 0x3a)
piixpm0: SMBus initialization failed
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 16
hdafg1 at hdaudio1: vendor 10ec product 0221
hdafg1: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg1: ADC02 2ch: Mic In [Jack]
hdafg1: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
pcib0 at pci0 dev 20 function 3: vendor 1022 product 780e (rev. 0x11)
pchb2 at pci0 dev 24 function 0: vendor 1022 product 1530 (rev. 0x00)
pchb3 at pci0 dev 24 function 1: vendor 1022 product 1531 (rev. 0x00)
pchb4 at pci0 dev 24 function 2: vendor 1022 product 1532 (rev. 0x00)
amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family16h)
pchb5 at pci0 dev 24 function 4: vendor 1022 product 1534 (rev. 0x00)
pchb6 at pci0 dev 24 function 5: vendor 1022 product 1535 (rev. 0x00)
isa0 at pcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7tpm0: device 0x000b15d1 rev 0x10
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: C2: I/O, lat 400 us, pow     0 mW
acpicpu0: P0: FFH, lat   4 us, pow  2184 mW, 1500 MHz
acpicpu0: P1: FFH, lat   4 us, pow  1950 mW, 1300 MHz
acpicpu0: P2: FFH, lat   4 us, pow  1660 mW, 1100 MHz
acpicpu0: P3: FFH, lat   4 us, pow  1441 mW,  950 MHz
acpicpu0: P4: FFH, lat   4 us, pow  1187 mW,  800 MHz
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1497258330 Hz quality 3000
uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
uhub2 at usb2: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 4 ports with 4 removable, self powered
uhub4 at usb4: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 4 ports with 4 removable, self powered
uhub5 at usb5: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub5: 4 ports with 4 removable, self powered
ahcisata0 port 0: device present, speed: 6.0Gb/s
wd0 at atabus0 drive 0
wd0: <M4-CT128M4SSD2>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 119 GB, 248085 cyl, 16 head, 63 sec, 512 bytes/sect x 250069680 sectors
wd0: GPT GUID: e3c1d46c-1b60-42bf-b87e-a82e1a440e03
dk0 at wd0: "96022c31-346e-4a79-bbca-8ade47131cd5", 242838125 blocks at 64, type: ffs
dk1 at wd0: "26409bce-87cf-4388-be10-2454d941417e", 7231439 blocks at 242838208, type: swap
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100), WRITE DMA FUA, NCQ (32 tags) w/PRIO
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA), NCQ (31 tags) w/PRIO
uhub6 at uhub5 port 2: Generic (0xbda) 4-Port USB 2.0 Hub (0x5411), class 9/0, rev 2.10/1.35, addr 2
uhub6: multiple transaction translators
uhub6: 4 ports with 2 removable, self powered
ugen0 at uhub6 port 1
ugen0: Realtek (0xbda) BillBoard Device (0x5400), rev 2.01/1.06, addr 3
uhidev0 at uhub6 port 2 configuration 1 interface 0
uhidev0: SINO WEALTH (0x603) Gaming Keyboard (0xf7), rev 2.00/7.23, addr 4, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard
uhidev1 at uhub6 port 2 configuration 1 interface 1
uhidev1: SINO WEALTH (0x603) Gaming Keyboard (0xf7), rev 2.00/7.23, addr 4, iclass 3/0
uhidev1: 8 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhid2 at uhidev1 reportid 5: input=0, output=0, feature=5
ukbd1 at uhidev1 reportid 6
wskbd1 at ukbd1 mux 1
ukbd2 at uhidev1 reportid 7
wskbd2 at ukbd2 mux 1
ukbd3 at uhidev1 reportid 8
wskbd3 at ukbd3 mux 1
uhidev2 at uhub6 port 3 configuration 1 interface 0
uhidev2: SINOWEALTH (0x258a) Game Mouse (0x13), rev 1.10/1.00, addr 5, iclass 3/1
ums0 at uhidev2: 5 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
uhidev3 at uhub6 port 3 configuration 1 interface 1
uhidev3: SINOWEALTH (0x258a) Game Mouse (0x13), rev 1.10/1.00, addr 5, iclass 3/1
uhidev3: 6 report ids
ukbd4 at uhidev3 reportid 1
wskbd4 at ukbd4 mux 1
uhid3 at uhidev3 reportid 2: input=3, output=0, feature=0
uhid4 at uhidev3 reportid 4: input=0, output=0, feature=153
uhid5 at uhidev3 reportid 5: input=0, output=0, feature=5
uhid6 at uhidev3 reportid 6: input=0, output=0, feature=1151
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on dk0 dumps on dk1
root file system type: ffs
kern.module.path=/stand/amd64/9.1/modules
kern info: [drm] initializing kernel modesetting (KABINI 0x1002:0x9833 0x1002:0x0123).
kern info: [drm] register mmio base: 0xf0900000
kern info: [drm] register mmio size: 262144
kern info: [drm] doorbell mmio base: 0xF0000000
kern info: [drm] doorbell mmio size: 8388608
kern info: ATOM BIOS: AMD
radeon0: info: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon0: info: GTT: 2048M 0x0000000020000000 - 0x000000009FFFFFFF
kern info: [drm] Detected VRAM RAM=200M, BAR=256M
kern info: [drm] RAM width 128bits DDR
Zone  kernel: Available graphics memory: 970714 kiB
kern info: [drm] radeon: 512M of VRAM memory ready
kern info: [drm] radeon: 2048M of GTT memory ready.
kern info: [drm] Loading kabini Microcode
kern info: [drm] Internal thermal controller without fan control
kern info: [drm] radeon: dpm initialized
kern info: [drm] Found VCE firmware/feedback version 40.2.2 / 15!
kern info: [drm] GART: num cpu pages 524288, num gpu pages 524288
kern info: [drm] PCIE GART of 2048M enabled (table at 0x0000000000324000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x0xffff8d409ad84c00
radeon0: info: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0x0xffff8d409ad84c04
radeon0: info: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0x0xffff8d409ad84c08
radeon0: info: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x0xffff8d409ad84c0c
radeon0: info: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0x0xffff8d409ad84c10
radeon0: info: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0x0xffffbf805e816c98
radeon0: info: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0x0xffff8d409ad84c18
radeon0: info: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0x0xffff8d409ad84c1c
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
radeon0: interrupting at ioapic1 pin 20 (radeon0)
kern info: [drm] radeon: irq initialized.
kern info: [drm] ring test on 0 succeeded in 3 usecs
kern info: [drm] ring test on 1 succeeded in 2 usecs
kern info: [drm] ring test on 2 succeeded in 2 usecs
kern info: [drm] ring test on 3 succeeded in 4 usecs
kern info: [drm] ring test on 4 succeeded in 4 usecs
kern info: [drm] ring test on 5 succeeded in 1 usecs
kern info: [drm] UVD initialized successfully.
kern info: [drm] ring test on 6 succeeded in 16 usecs
kern info: [drm] ring test on 7 succeeded in 4 usecs
kern info: [drm] VCE initialized successfully.
kern info: [drm] ib test on ring 0 succeeded in 0 usecs
kern info: [drm] ib test on ring 1 succeeded in 0 usecs
kern info: [drm] ib test on ring 2 succeeded in 0 usecs
kern info: [drm] ib test on ring 3 succeeded in 0 usecs
kern info: [drm] ib test on ring 4 succeeded in 0 usecs
kern info: [drm] ib test on ring 5 succeeded
kern info: [drm] ib test on ring 6 succeeded
kern info: [drm] ib test on ring 7 succeeded
kern info: [drm] Radeon Display Connectors
kern info: [drm] Connector 0:
kern info: [drm]   DP-1
kern info: [drm]   HPD2
kern info: [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
kern info: [drm]   Encoders:
kern info: [drm]     DFP1: INTERNAL_UNIPHY
kern info: [drm] Connector 1:
kern info: [drm]   DVI-D-1
kern info: [drm]   HPD1
kern info: [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
kern info: [drm]   Encoders:
kern info: [drm]     DFP2: INTERNAL_UNIPHY
kern info: [drm] Connector 2:
kern info: [drm]   VGA-1
kern info: [drm]   DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
kern info: [drm]   Encoders:
kern info: [drm]     CRT1: INTERNAL_KLDSCP_DAC1
radeondrmkmsfb0 at radeon0
radeondrmkmsfb0: framebuffer at 0xffffbf805f2ac000, size 3840x2160, depth 32, stride 15360
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wskbd3: connecting to wsdisplay0
wskbd4: connecting to wsdisplay0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)

/var/log/Xorg.0.log

[   358.391] 
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[   358.392] Build Operating System: NetBSD/amd64 9.1 - The NetBSD Foundation, Inc.
[   358.392] Current Operating System: NetBSD wyse-netbsd 9.1 NetBSD 9.1 (GENERIC) #0: Sun Oct 18 19:24:30 UTC 2020  mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC amd64
[   358.394] Build Date: 03 March 2019  07:11:23AM
[   358.394]  
[   358.394] Current version of pixman: 0.38.4
[   358.394] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   358.395] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   358.395] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan  8 16:57:48 2021
[   358.402] (II) Loader magic: 0x16a48ea60
[   358.402] (II) Module ABI versions:
[   358.402] 	X.Org ANSI C Emulation: 0.4
[   358.402] 	X.Org Video Driver: 24.0
[   358.402] 	X.Org XInput driver : 24.1
[   358.402] 	X.Org Server Extension : 10.0
[   358.409] (--) PCI:*(0@0:1:0) 1002:9833:1002:0123 rev 0, Mem @ 0xe0000000/268435456, 0xf0000000/8388608, 0xf0900000/262144, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[   358.410] (==) Using default built-in configuration (39 lines)
[   358.410] (==) --- Start of built-in configuration ---
[   358.410] 	Section "Device"
[   358.410] 		Identifier	"Builtin Default ati Device 0"
[   358.410] 		Driver	"ati"
[   358.410] 	EndSection
[   358.410] 	Section "Screen"
[   358.410] 		Identifier	"Builtin Default ati Screen 0"
[   358.410] 		Device	"Builtin Default ati Device 0"
[   358.410] 	EndSection
[   358.410] 	Section "Device"
[   358.410] 		Identifier	"Builtin Default modesetting Device 0"
[   358.410] 		Driver	"modesetting"
[   358.410] 	EndSection
[   358.410] 	Section "Screen"
[   358.410] 		Identifier	"Builtin Default modesetting Screen 0"
[   358.410] 		Device	"Builtin Default modesetting Device 0"
[   358.410] 	EndSection
[   358.410] 	Section "Device"
[   358.410] 		Identifier	"Builtin Default vesa Device 0"
[   358.410] 		Driver	"vesa"
[   358.410] 	EndSection
[   358.410] 	Section "Screen"
[   358.410] 		Identifier	"Builtin Default vesa Screen 0"
[   358.410] 		Device	"Builtin Default vesa Device 0"
[   358.410] 	EndSection
[   358.410] 	Section "Device"
[   358.410] 		Identifier	"Builtin Default wsfb Device 0"
[   358.410] 		Driver	"wsfb"
[   358.410] 	EndSection
[   358.410] 	Section "Screen"
[   358.410] 		Identifier	"Builtin Default wsfb Screen 0"
[   358.411] 		Device	"Builtin Default wsfb Device 0"
[   358.411] 	EndSection
[   358.411] 	Section "ServerLayout"
[   358.411] 		Identifier	"Builtin Default Layout"
[   358.411] 		Screen	"Builtin Default ati Screen 0"
[   358.411] 		Screen	"Builtin Default modesetting Screen 0"
[   358.411] 		Screen	"Builtin Default vesa Screen 0"
[   358.411] 		Screen	"Builtin Default wsfb Screen 0"
[   358.411] 	EndSection
[   358.411] (==) --- End of built-in configuration ---
[   358.411] (==) ServerLayout "Builtin Default Layout"
[   358.411] (**) |-->Screen "Builtin Default ati Screen 0" (0)
[   358.411] (**) |   |-->Monitor "<default monitor>"
[   358.413] (**) |   |-->Device "Builtin Default ati Device 0"
[   358.413] (==) No monitor specified for screen "Builtin Default ati Screen 0".
	Using a default monitor configuration.
[   358.413] (**) |-->Screen "Builtin Default modesetting Screen 0" (1)
[   358.413] (**) |   |-->Monitor "<default monitor>"
[   358.415] (**) |   |-->Device "Builtin Default modesetting Device 0"
[   358.415] (==) No monitor specified for screen "Builtin Default modesetting Screen 0".
	Using a default monitor configuration.
[   358.415] (**) |-->Screen "Builtin Default vesa Screen 0" (2)
[   358.415] (**) |   |-->Monitor "<default monitor>"
[   358.416] (**) |   |-->Device "Builtin Default vesa Device 0"
[   358.416] (==) No monitor specified for screen "Builtin Default vesa Screen 0".
	Using a default monitor configuration.
[   358.416] (**) |-->Screen "Builtin Default wsfb Screen 0" (3)
[   358.416] (**) |   |-->Monitor "<default monitor>"
[   358.417] (**) |   |-->Device "Builtin Default wsfb Device 0"
[   358.417] (==) No monitor specified for screen "Builtin Default wsfb Screen 0".
	Using a default monitor configuration.
[   358.418] (==) Not automatically adding devices
[   358.418] (==) Not automatically enabling devices
[   358.418] (==) Not automatically adding GPU devices
[   358.418] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   358.419] (==) FontPath set to:
	/usr/X11R7/lib/X11/fonts/misc/,
	/usr/X11R7/lib/X11/fonts/TTF/,
	/usr/X11R7/lib/X11/fonts/Type1/,
	/usr/X11R7/lib/X11/fonts/75dpi/,
	/usr/X11R7/lib/X11/fonts/100dpi/
[   358.419] (==) ModulePath set to "/usr/X11R7/lib/modules"
[   358.419] (==) |-->Input Device "<default pointer>"
[   358.419] (==) |-->Input Device "<default keyboard>"
[   358.419] (==) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
[   358.419] (==) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
[   358.420] (II) LoadModule: "glx"
[   358.425] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[   358.433] (II) Module glx: vendor="X.Org Foundation"
[   358.433] 	compiled for 1.20.5, module version = 1.0.0
[   358.433] 	ABI class: X.Org Server Extension, version 10.0
[   358.433] (II) LoadModule: "ati"
[   358.434] (II) Loading /usr/X11R7/lib/modules/drivers/ati_drv.so
[   358.436] (II) Module ati: vendor="X.Org Foundation"
[   358.436] 	compiled for 1.20.5, module version = 6.14.6
[   358.436] 	Module class: X.Org Video Driver
[   358.436] 	ABI class: X.Org Video Driver, version 24.0
[   358.436] (II) LoadModule: "radeon"
[   358.438] (II) Loading /usr/X11R7/lib/modules/drivers/radeon_drv.so
[   358.443] (II) Module radeon: vendor="X.Org Foundation"
[   358.443] 	compiled for 1.20.5, module version = 19.0.1
[   358.443] 	Module class: X.Org Video Driver
[   358.443] 	ABI class: X.Org Video Driver, version 24.0
[   358.443] (II) LoadModule: "modesetting"
[   358.445] (II) Loading /usr/X11R7/lib/modules/drivers/modesetting_drv.so
[   358.446] (II) Module modesetting: vendor="X.Org Foundation"
[   358.446] 	compiled for 1.20.5, module version = 1.20.5
[   358.446] 	Module class: X.Org Video Driver
[   358.446] 	ABI class: X.Org Video Driver, version 24.0
[   358.446] (II) LoadModule: "vesa"
[   358.448] (II) Loading /usr/X11R7/lib/modules/drivers/vesa_drv.so
[   358.449] (II) Module vesa: vendor="X.Org Foundation"
[   358.449] 	compiled for 1.20.5, module version = 2.4.0
[   358.449] 	Module class: X.Org Video Driver
[   358.450] 	ABI class: X.Org Video Driver, version 24.0
[   358.450] (II) LoadModule: "wsfb"
[   358.452] (II) Loading /usr/X11R7/lib/modules/drivers/wsfb_drv.so
[   358.453] (II) Module wsfb: vendor="X.Org Foundation"
[   358.453] 	compiled for 1.20.5, module version = 0.4.0
[   358.453] 	ABI class: X.Org Video Driver, version 24.0
[   358.453] (II) LoadModule: "mouse"
[   358.454] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[   358.455] (II) Module mouse: vendor="X.Org Foundation"
[   358.455] 	compiled for 1.20.5, module version = 1.9.2
[   358.455] 	Module class: X.Org XInput Driver
[   358.455] 	ABI class: X.Org XInput driver, version 24.1
[   358.455] (II) LoadModule: "kbd"
[   358.457] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[   358.458] (II) Module kbd: vendor="X.Org Foundation"
[   358.458] 	compiled for 1.20.5, module version = 1.9.0
[   358.458] 	Module class: X.Org XInput Driver
[   358.458] 	ABI class: X.Org XInput driver, version 24.1
[   358.458] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
	ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
	ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
	ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
	ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
	ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
	ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
	ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
	ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
	ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
	ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
	ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
	ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
	ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
	ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
	ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
	ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
	ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
	ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
	ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
	ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
	ATI Radeon 9800PRO, ATI Radeon 9800XT,
	ATI Radeon Mobility 9600/9700 (M10/M11),
	ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
	ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
	ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
	ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
	ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
	ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
	ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
	ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
	ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
	ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
	ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
	ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
	ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
	ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
	ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
	ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
	ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
	ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
	ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
	ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
	ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
	ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
	ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
	ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
	ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
	ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
	ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
	ATI FireGL V3350, ATI Mobility Radeon X1450,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
	ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
	ATI FireGL V3400, ATI Mobility FireGL V5250,
	ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
	ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
	ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
	ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
	ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
	ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
	ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
	ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
	ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
	AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
	ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
	ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
	ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
	ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
	ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
	ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
	ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
	ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
	ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
	ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
	ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
	ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
	ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
	ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
	ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
	ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
	ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
	AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
	AMD Radeon HD 6300 Series Graphics,
	AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
	ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
	AMD Firestream 9350, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
	ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
	REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
	ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
	AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
	AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
	ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
	MULLINS, KAVERI, HAWAII
[   358.468] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   358.468] (II) VESA: driver for VESA chipsets: vesa
[   358.469] (II) wsfb: driver for wsdisplay framebuffer: wsfb
[   358.469] (--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode (version 3.32)
[   358.469] (--) using VT number 5
[   358.500] (II) [KMS] Kernel modesetting enabled.
[   358.500] (WW) Falling back to old probe method for modesetting
[   358.501] (WW) Falling back to old probe method for wsfb
[   358.501] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   358.501] (II) RADEON(0): Creating default Display subsection in Screen section
	"Builtin Default ati Screen 0" for depth/fbbpp 24/32
[   358.501] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[   358.501] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   358.501] (==) RADEON(0): Default visual is TrueColor
[   358.501] (==) RADEON(0): RGB weight 888
[   358.501] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[   358.501] (--) RADEON(0): Chipset: "KABINI" (ChipID = 0x9833)
[   358.502] (II) Loading sub module "fb"
[   358.502] (II) LoadModule: "fb"
[   358.505] (II) Loading /usr/X11R7/lib/modules/libfb.so
[   358.507] (II) Module fb: vendor="X.Org Foundation"
[   358.507] 	compiled for 1.20.5, module version = 1.0.0
[   358.507] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   358.507] (II) Loading sub module "dri2"
[   358.507] (II) LoadModule: "dri2"
[   358.507] (II) Module "dri2" already built-in
[   358.782] (II) Loading sub module "glamoregl"
[   358.782] (II) LoadModule: "glamoregl"
[   358.785] (II) Loading /usr/X11R7/lib/modules/libglamoregl.so
[   358.787] (II) Module glamoregl: vendor="X.Org Foundation"
[   358.787] 	compiled for 1.20.5, module version = 1.0.1
[   358.787] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   358.888] (II) RADEON(0): Refusing to try glamor on llvmpipe
[   358.891] (EE) RADEON(0): glamor detected, failed to initialize EGL.
[   358.891] (II) Loading sub module "shadow"
[   358.891] (II) LoadModule: "shadow"
[   358.894] (II) Loading /usr/X11R7/lib/modules/extensions/libshadow.so
[   358.895] (II) Module shadow: vendor="X.Org Foundation"
[   358.895] 	compiled for 1.20.5, module version = 1.1.0
[   358.895] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   358.895] (II) RADEON(0): KMS Color Tiling: disabled
[   358.895] (II) RADEON(0): KMS Color Tiling 2D: disabled
[   358.895] (II) RADEON(0): KMS Pageflipping: enabled
[   358.895] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[   358.951] (II) RADEON(0): Output DisplayPort-0 has no monitor section
[   358.952] (II) RADEON(0): Output DVI-0 has no monitor section
[   358.958] (II) RADEON(0): Output VGA-0 has no monitor section
[   358.958] (WW) RADEON(0): 3 ZaphodHeads crtcs unavailable. Some outputs will stay off.
[   359.018] (II) RADEON(0): EDID for output DisplayPort-0
[   359.018] (II) RADEON(0): Manufacturer: GSM  Model: 5b08  Serial#: 40485
[   359.018] (II) RADEON(0): Year: 2018  Week: 3
[   359.018] (II) RADEON(0): EDID Version: 1.3
[   359.018] (II) RADEON(0): Digital Display Input
[   359.018] (II) RADEON(0): Max Image Size [cm]: horiz.: 60  vert.: 34
[   359.018] (II) RADEON(0): Gamma: 2.20
[   359.019] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
[   359.019] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   359.019] (II) RADEON(0): First detailed timing is preferred mode
[   359.019] (II) RADEON(0): redX: 0.652 redY: 0.335   greenX: 0.305 greenY: 0.637
[   359.019] (II) RADEON(0): blueX: 0.148 blueY: 0.062   whiteX: 0.313 whiteY: 0.329
[   359.019] (II) RADEON(0): Supported established timings:
[   359.019] (II) RADEON(0): 640x480@60Hz
[   359.019] (II) RADEON(0): 800x600@60Hz
[   359.019] (II) RADEON(0): 1024x768@60Hz
[   359.019] (II) RADEON(0): Manufacturer's mask: 0
[   359.019] (II) RADEON(0): Supported standard timings:
[   359.019] (II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 60  vid: 16497
[   359.019] (II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   359.019] (II) RADEON(0): #2: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[   359.019] (II) RADEON(0): #3: hsize: 1600  vsize 900  refresh: 60  vid: 49321
[   359.019] (II) RADEON(0): #4: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[   359.019] (II) RADEON(0): #5: hsize: 1280  vsize 800  refresh: 60  vid: 129
[   359.019] (II) RADEON(0): Supported detailed timing:
[   359.020] (II) RADEON(0): clock: 297.0 MHz   Image Size:  600 x 340 mm
[   359.020] (II) RADEON(0): h_active: 3840  h_sync: 4016  h_sync_end 4104 h_blank_end 4400 h_border: 0
[   359.020] (II) RADEON(0): v_active: 2160  v_sync: 2168  v_sync_end 2178 v_blanking: 2250 v_border: 0
[   359.020] (II) RADEON(0): Supported detailed timing:
[   359.020] (II) RADEON(0): clock: 241.5 MHz   Image Size:  600 x 340 mm
[   359.020] (II) RADEON(0): h_active: 2560  h_sync: 2608  h_sync_end 2640 h_blank_end 2720 h_border: 0
[   359.020] (II) RADEON(0): v_active: 1440  v_sync: 1443  v_sync_end 1448 v_blanking: 1481 v_border: 0
[   359.020] (II) RADEON(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 135 kHz, PixClock max 305 MHz
[   359.020] (II) RADEON(0): Monitor name: LG Ultra HD
[   359.020] (II) RADEON(0): Supported detailed timing:
[   359.020] (II) RADEON(0): clock: 148.5 MHz   Image Size:  600 x 340 mm
[   359.020] (II) RADEON(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[   359.020] (II) RADEON(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[   359.020] (II) RADEON(0): Serial No: 803NTKF16485
[   359.020] (II) RADEON(0): Number of EDID sections to follow: 1
[   359.020] (II) RADEON(0): EDID (in hex):
[   359.020] (II) RADEON(0): 	00ffffffffffff001e6d085b259e0000
[   359.020] (II) RADEON(0): 	031c0103803c2278ea3035a7554ea326
[   359.020] (II) RADEON(0): 	0f50542108007140818081c0a9c0d1c0
[   359.020] (II) RADEON(0): 	81000101010104740030f2705a80b058
[   359.020] (II) RADEON(0): 	8a0058542100001e565e00a0a0a02950
[   359.020] (II) RADEON(0): 	3020350058542100001a000000fd0038
[   359.020] (II) RADEON(0): 	3d1e871e000a202020202020000000fc
[   359.020] (II) RADEON(0): 	004c4720556c7472612048440a2001c5
[   359.021] (II) RADEON(0): 	02031c71459022040301230907076d03
[   359.021] (II) RADEON(0): 	0c004000b83c200060010203023a8018
[   359.021] (II) RADEON(0): 	71382d40582c450058542100001e0000
[   359.021] (II) RADEON(0): 	00ff003830334e544b4631363438350a
[   359.021] (II) RADEON(0): 	00000000000000000000000000000000
[   359.021] (II) RADEON(0): 	00000000000000000000000000000000
[   359.021] (II) RADEON(0): 	00000000000000000000000000000000
[   359.021] (II) RADEON(0): 	00000000000000000000000000000082
[   359.021] (--) RADEON(0): HDMI max TMDS frequency 300000KHz
[   359.021] (II) RADEON(0): Printing probed modes for output DisplayPort-0
[   359.021] (II) RADEON(0): Modeline "3840x2160"x30.0  297.00  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.5 kHz eP)
[   359.021] (II) RADEON(0): Modeline "3840x2160"x25.0  297.00  3840 4896 4984 5280  2160 2168 2178 2250 +hsync +vsync (56.2 kHz e)
[   359.021] (II) RADEON(0): Modeline "3840x2160"x24.0  297.00  3840 5116 5204 5500  2160 2168 2178 2250 +hsync +vsync (54.0 kHz e)
[   359.022] (II) RADEON(0): Modeline "3840x2160"x30.0  296.70  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.4 kHz e)
[   359.022] (II) RADEON(0): Modeline "3840x2160"x24.0  296.70  3840 5116 5204 5500  2160 2168 2178 2250 +hsync +vsync (53.9 kHz e)
[   359.022] (II) RADEON(0): Modeline "2560x1440"x60.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz e)
[   359.022] (II) RADEON(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[   359.022] (II) RADEON(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[   359.022] (II) RADEON(0): Modeline "1920x1080"x30.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
[   359.022] (II) RADEON(0): Modeline "1920x1080"x30.0   74.18  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.7 kHz e)
[   359.022] (II) RADEON(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
[   359.022] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   359.022] (II) RADEON(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[   359.022] (II) RADEON(0): Modeline "1152x864"x60.0   81.58  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz)
[   359.022] (II) RADEON(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   359.022] (II) RADEON(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   359.022] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   359.022] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   359.022] (II) RADEON(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   359.022] (II) RADEON(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   359.022] (II) RADEON(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   359.022] (II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   359.023] (II) RADEON(0): EDID for output DVI-0
[   359.028] (II) RADEON(0): EDID for output VGA-0
[   359.028] (II) RADEON(0): Output DisplayPort-0 connected
[   359.028] (II) RADEON(0): Output DVI-0 disconnected
[   359.028] (II) RADEON(0): Output VGA-0 disconnected
[   359.028] (II) RADEON(0): Using exact sizes for initial modes
[   359.028] (II) RADEON(0): Output DisplayPort-0 using initial mode 3840x2160 +0+0
[   359.029] (II) RADEON(0): mem size init: gart size :7fb69000 vram size: s:20000000 visible:1d934000
[   359.029] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[   359.029] (==) RADEON(0): DPI set to (96, 96)
[   359.029] (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
[   359.029] (II) Loading sub module "ramdac"
[   359.029] (II) LoadModule: "ramdac"
[   359.029] (II) Module "ramdac" already built-in
[   359.029] (II) UnloadModule: "modesetting"
[   359.029] (II) Unloading modesetting
[   359.029] (II) UnloadModule: "vesa"
[   359.029] (II) Unloading vesa
[   359.029] (II) UnloadModule: "wsfb"
[   359.029] (II) Unloading wsfb
[   359.031] (II) RADEON(0): Front buffer size: 32400K
[   359.031] (II) RADEON(0): VRAM usage limit set to 406915K
[   359.034] (==) RADEON(0): DRI3 disabled
[   359.034] (==) RADEON(0): Backing store enabled
[   359.034] (WW) RADEON(0): Direct rendering disabled
[   359.034] (II) RADEON(0): Acceleration disabled
[   359.034] (==) RADEON(0): DPMS enabled
[   359.034] (==) RADEON(0): Silken mouse enabled
[   359.038] (II) Initializing extension Generic Event Extension
[   359.039] (II) Initializing extension SHAPE
[   359.041] (II) Initializing extension MIT-SHM
[   359.042] (II) Initializing extension XInputExtension
[   359.043] (II) Initializing extension XTEST
[   359.045] (II) Initializing extension BIG-REQUESTS
[   359.046] (II) Initializing extension SYNC
[   359.047] (II) Initializing extension XKEYBOARD
[   359.049] (II) Initializing extension XC-MISC
[   359.050] (II) Initializing extension SECURITY
[   359.051] (II) Initializing extension XFIXES
[   359.053] (II) Initializing extension XFree86-Bigfont
[   359.054] (II) Initializing extension RENDER
[   359.055] (II) Initializing extension RANDR
[   359.057] (II) Initializing extension COMPOSITE
[   359.059] (II) Initializing extension DAMAGE
[   359.060] (II) Initializing extension MIT-SCREEN-SAVER
[   359.061] (II) Initializing extension DOUBLE-BUFFER
[   359.062] (II) Initializing extension RECORD
[   359.063] (II) Initializing extension DPMS
[   359.065] (II) Initializing extension Present
[   359.066] (II) Initializing extension X-Resource
[   359.067] (II) Initializing extension XVideo
[   359.068] (II) Initializing extension XVideo-MotionCompensation
[   359.069] (II) Initializing extension GLX
[   359.070] (II) AIGLX: Screen 0 is not DRI2 capable
[   359.084] (II) IGLX: Loaded and initialized swrast
[   359.084] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   359.084] (II) Initializing extension XFree86-VidModeExtension
[   359.085] (II) Initializing extension XFree86-DGA
[   359.086] (II) Initializing extension XFree86-DRI
[   359.087] (II) Initializing extension DRI2
[   359.088] (II) RADEON(0): Setting screen physical size to 1016 x 571
[   359.615] (II) Using input driver 'mouse' for '<default pointer>'
[   359.615] (**) Option "CorePointer" "on"
[   359.615] (**) <default pointer>: always reports core events
[   359.616] (**) <default pointer>: auto calibration enabled
[   359.616] (**) <default pointer>: associated screen: 0
[   359.616] (WW) <default pointer>: No Device specified, looking for one...
[   359.616] (II) <default pointer>: found Device "/dev/wsmouse"
[   359.617] (--) <default pointer>: Device: "/dev/wsmouse"
[   359.617] (==) <default pointer>: Protocol: "WSMouse"
[   359.617] (**) <default pointer>: always reports core events
[   359.617] (**) Option "Device" "/dev/wsmouse"
[   359.619] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[   359.619] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[   359.619] (**) <default pointer>: Buttons: 9
[   359.619] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[   359.619] (**) <default pointer>: (accel) keeping acceleration scheme 1
[   359.619] (**) <default pointer>: (accel) acceleration profile 0
[   359.619] (**) <default pointer>: (accel) acceleration factor: 2.000
[   359.619] (**) <default pointer>: (accel) acceleration threshold: 4
[   359.620] (II) Using input driver 'kbd' for '<default keyboard>'
[   359.620] (**) Option "CoreKeyboard" "on"
[   359.620] (**) <default keyboard>: always reports core events
[   359.620] (**) <default keyboard>: always reports core events
[   359.620] (**) Option "Protocol" "standard"
[   359.620] (**) Option "XkbRules" "base"
[   359.620] (**) Option "XkbModel" "pc105"
[   359.620] (**) Option "XkbLayout" "us"
[   359.620] (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD, id 7)
[   378.063] (II) RADEON(0): Allocate new frame buffer 1920x1080
[   378.087] (II) RADEON(0): VRAM usage limit set to 428785K

xorg.conf.new

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	Screen      1  "Screen1" RightOf "Screen0"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/X11R7/lib/modules"
	FontPath     "/usr/X11R7/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R7/lib/X11/fonts/TTF/"
	FontPath     "/usr/X11R7/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R7/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R7/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
	Load  "dri"
	Load  "dri2"
	Load  "glx"
	Load  "shadow"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "wsmouse"
	Option	    "Device" "/dev/wsmouse"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "Accel"              	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ZaphodHeads"        	# <str>
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI3"               	# [<bool>]
        #Option     "DRI"                	# <i>
        #Option     "ShadowPrimary"      	# [<bool>]
        #Option     "TearFree"           	# [<bool>]
        #Option     "DeleteUnusedDP12Displays" 	# [<bool>]
        #Option     "VariableRefresh"    	# [<bool>]
	Identifier  "Card0"
	Driver      "amdgpu"
	BusID       "PCI:0:1:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "Accel"              	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ZaphodHeads"        	# <str>
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI3"               	# [<bool>]
        #Option     "DRI"                	# <i>
        #Option     "ShadowPrimary"      	# [<bool>]
        #Option     "TearFree"           	# [<bool>]
        #Option     "DeleteUnusedDP12Displays" 	# [<bool>]
        #Option     "VariableRefresh"    	# [<bool>]
	Identifier  "Card1"
	Driver      "amdgpu"
	BusID       "PCI:0:1:1"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Card1"
	Monitor    "Monitor1"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

pcictl pci0 list

000:00:0: AMD Family16h Root Complex (host bridge)
000:01:0: ATI Technologies product 9833 (VGA display)
000:01:1: ATI Technologies HDMI/DP Audio (mixed mode multimedia)
000:02:0: AMD product 1538 (host bridge)
000:02:3: AMD Family16h GPP Bridge (PCI bridge)
000:16:0: AMD FCH USB xHCI Controller (USB serial bus, xHCI, revision 0x01)
000:17:0: AMD Hudson SATA (AHCI) Controller (SATA mass storage, AHCI 1.0, revision 0x40)
000:18:0: AMD Hudson USB OHCI Controller (USB serial bus, OHCI, revision 0x39)
000:18:2: AMD Hudson USB EHCI Controller (USB serial bus, EHCI, revision 0x39)
000:19:0: AMD Hudson USB OHCI Controller (USB serial bus, OHCI, revision 0x39)
000:19:2: AMD Hudson USB EHCI Controller (USB serial bus, EHCI, revision 0x39)
000:20:0: AMD Hudson SMBus Controller (SMBus serial bus, revision 0x3a)
000:20:2: AMD Hudson HD Audio Controller (mixed mode multimedia, revision 0x02)
000:20:3: AMD Hudson LPC Bridge (ISA bridge, revision 0x11)
000:24:0: AMD Family16h HyperTransport Configuration (host bridge)
000:24:1: AMD Family16h Address Map Configuration (host bridge)
000:24:2: AMD Family16h DRAM Configuration (host bridge)
000:24:3: AMD Family16h North Bridge Configuration (host bridge)
000:24:4: AMD Family16h CPU C-state Configuration (host bridge)
000:24:5: AMD Family16h Miscellaneous Configuration (host bridge)
001:00:0: Realtek Semiconductor 8168/8111 10/100/1000 Ethernet (ethernet network, revision 0x06)

nia

The full Xorg log from attempting to use the radeon driver would be interesting, but I don't think there's acceleration for this generation.

byteporter

nia I think officially that is the case as well for stable, I'm not sure if there's anything in current. I would be interested in at least looking into porting some code myself though. I think the modules in NetBSD were ported from a much older version of Linux at some point and are just out of date in comparison to the new stuff? I'm not sure what's involved in this porting but I might have a look into it. I suppose the first step would be to get "current" running and see if the drivers/modules in that release have the support and maybe just haven't been tested enough to be in stable yet.

rvp

byteporter I'm not sure if current has amdgpu built in and tried to use it or if amdgpu is something you need to build custom after installation.

According to @nia, amdgpu is not ready for prime-time. Use radeon instead in your xorg.conf.

byteporter

Side note... apparently the mini pcie slot is not restricted to a whitelist of wlan adapters. Hooked a Radeon HD 7970 250W desktop GPU up to it, renabled the "onboard wireless" in the BIOS which surprisingly also then let me set the default video to "Add-On Board" in the BIOS and it works just fine on Slackware-current to my amusement 😃 I'll have to try this on the one that I installed NetBSD and test it out for kicks, even though I think Radeon 7000 is also newer than is supported. This is unfortunately the oldest discrete GPU I have.

Wyse 5020 Thin Client with Radeon HD 7970 eGPU

Got a respectable _30fps in Unigine Heaven benchmark at Extreme preset, not bad for a 15W CPU and a 250W GPU haha!

Unigine Heaven benchmark results

byteporter

Update: Finally managed to install NetBSD-9.99-77 but it is super unreliable on my machine. Took a while to get it to install, most of the time the menu based "ncurses" (not sure what it's actually built with) installer program wouldn't load. When it would load, which seems to be down to luck, a couple of times it froze up while installing packages. Once I finally managed to get it to finish I skipped most of the config (it hung once when I tried to set up the network...) and straight to reboot.

And... it works! At least as far as the GPU goes. I was able to get it to reboot and then launch X without doing anything else and xdriinfo came back affirmative for hardware support. Had a look at the Xorg.0.log and everything looks fine. For some reason the first time I launched X it had an error with fonts but after killing it and trying again I did have the fonts (but then the mouse started acting weird).

So it looks like support is being worked on in current. Since this machine is for play, I'd love to be running that to at least give reports on more hardware if nothing else. I have no idea why current is so flaky on my machine though. I think it may have something to do with TPM, which is the trusted platform module. I noticed tpm0 in the dmesg when it was booting and then a few times during the install it would echo out errors on the console related to unexpected entropy or something like that. I have to admit I don't even know what TPM does, I imagine it has to do with locking down the machine to running signed binaries or something along those lines. I'm pretty sure I don't want it even if it were working though. I can disable it in the BIOS but NetBSD still makes a tpm0 device for some reason. Is there a way to disable loading a module (or disable a built in driver I guess) from the boot prompt? I read the manpage for boot and all I saw was how to tell it to load things, not disable them. I'm also not sure if that's even the problem, but it seems as good a place to start as any.

No test on the 7970 yet but perhaps in the future if I can get it straightened out 😉

20-100

@rvp has written an excellent post on wsfb in which he explains how to disable a module.
As you already found out, it boils down to editing /boot.cfg:
menu=Boot normally:userconf disable your_module_here_;boot NAME=NetBSD_9.0:netbsd

byteporter

20-100 Thanks! I'll have to give that a try with the 9.99-77 installer and see if I can figure out what is making it flaky. I did notice that tpm0 does get loaded for me in stable as well, but it doesn't cause issues. I paid closer attention yesterday when trying it again and the issues are along the lines of "tpm0 expected 10 bytes but read 8" and then occasionally errors relating to entropy, but I'm not sure if that's also tpm0. It seems to mangle the output or maybe just conflicts with the installer running on the console (I see these errors get written to the screen over top of the the installer when its running), so sometimes multiple errors seem to end up on a single line.

I actually went back to NetBSD-9.1 and installed without X11 so I could install modular-xorg from pkgsrc. This seems like it could have a new enough version of Xorg to have the support I need built in (modular-xorg-server-1.20.10.tgz is what's in there). I tried to install the meta package modular-xorg but it complains about a bunch of unmet dependencies and then when I try startx after letting it install, it cannot find libX11.so.7 among others. I couldn't find this file on the system so I went looking around in pkgsrc and I think it may currently be in flux? Very weird.

"libX11" is shown on https://pkgsrc.se/x11/libX11 but is not currently in the list of files at http://cdn.netbsd.org/pub/pkgsrc/packages/NetBSD/amd64/9.1/All/ . Furthermore, I know I installed tigervnc a couple days ago because it's my preferred VNC and it is also not currently there for some reason. I was attempting to install it because I figured it would be an easier way to launch and X server from an ssh session so I could test as I tried to install the packages.

Only thing I can figure is that pkgsrc is currently in the process of updating?

20-100

Curiously, you need to also install the X11 sets if you plan to install the modular-x11 package.
You also need to modify a few configuration files so this mixture works.
Here's what I had to do to get modular-x11 to work:

<RANT>That markdown stuff is a real PITA on an IT forum!</RANT>

I have made my script available here, it was completely illegible in my post:
http://defert.com/tmp/modular-x11.txt

byteporter

20-100 Oh perfect! Thanks so much for this, looks like gold in my situation 😀

I had a look through the Firefox thread just now and it sounds like indeed pkgsrc is currently all out of whack but should stabilize in time. So it sounds like using the base install's X11 infrastructure as you've posted might help me resolve this in the short term, so much appreciated!

The reason I thought I needed to not have it installed is the guide that I ended up on from googling: https://wiki.netbsd.org/pkgsrc/how_to_install_modular_xorg/ . It assumes starting from a clean install without installing the X11 sets and doesn't say how to do it otherwise. It's also building from source packages so I was already improvising a little bit since I'm not particularly interested in compiling X on an embedded SoC class CPU.

20-100

The wiki might have been accurate in its time...
I did my modular-x11 tests in Aug. 2020 and had to do what I've described in the script.

chrisfromgreece

My pc has a radeon pro and my laptop Amd Vega 3 is it ever possible for netbsd to properly work -with hardware acceleration - on my pc ?

byteporter

chrisfromgreece I would imagine at some point yes but I think definitely not in 9.1, maybe not in current (9.99). I'm 99.9% sure that both your GPUs are supported by the Linux amdgpu driver which I think is used as the upstream to port to the BSDs. amdgpu is not in 9.1 AFAIK and I think the one is 9.99 is from a pretty old version of the Linux driver that may not support your chips.

So I would imagine that eventually a newer version of the Linux driver (which is open source and gets aid from AMD) and related Xorg drivers will be used to refresh the NetBSD drivers but I have no idea if anyone works on it regularly. I doubt it's a priority for developers who have to make best use of scarce resources and I would imagine favor server loads since hardware is a pretty big expenditure for a necessarily small subset of users (as obviously not every user has the same hardware).

Disclaimer though, I have no idea what the developers priorities are, I'm new here and only just today signed up for my first mailing list, the NetBSD-Users one 😄

Pragmatic solution if your desktop has space for another card is to just get a GPU that is supported to use in the meantime if the modesetting driver isn't to your liking. I have no idea what the used market would be like in Greece, but a Radeon 5450 is $7.50 USD with free shipping currently on eBay. It's not gonna run games (but neither will NetBSD for the most part) but it should make your desktop snappy. I can say that I have a laptop with a Mobility HD 5650 and it works accelerated under NetBSD 9.1 out of the box.

Vega on your laptop is even newer and less likely to be supported by the amdgpu in NetBSD 9.99 I think, but the modesetting and llvm optimized software driver are actually pretty good. The big issue with running the software drivers for me on these thin clients is that the CPU is extremely wimpy (Quad 1.5GHz, single channel ddr3 memory bus, 15W TDP) and I also have a huge monitor that it's really nice to be able to do very high resolution on.

byteporter

Problem solved with tin snips and zip ties 😄. Firepro V4900 works great in NetBSD-9.1!

oui

byteporter Must admit, that's a rather attractive NetBSD box you got there. 😍😂