Free4Good Let me know if there is anything else you need me to check while we are at it.
Thanks. So I'm assuming the reloc workaround did the trick for you? Were you able to install NetBSD?
nopana Two images (one for reloc none and one for reloc 0x2000000)
Ah, that looks like what's been reported here. Linux too seems to have an issue with that USB stick, but, it carries on OK though (from your Linux dmesg output):
[ 6.340986] usb 3-6: device descriptor read/64, error -110
[ 6.568014] usb 3-6: New USB device found, idVendor=abcd, idProduct=1234, bcdDevice= 1.00
[ 6.568464] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.568471] usb 3-6: Product: UDisk
[ 6.568474] usb 3-6: Manufacturer: General
[ 6.568477] usb 3-6: SerialNumber: 076
[ 6.683938] usb 3-10: new full-speed USB device number 4 using xhci_hcd
[ 6.808364] usb 3-10: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
[ 6.808938] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.819846] usb-storage 3-6:1.0: USB Mass Storage device detected
error -110 on Linux is ETIMEDOUT. Maybe NetBSD should have a longer one; or it should retey more; or needs some quirks for this USB controller?--no idea.
Some suggestions:
- Try the latest -HEAD. Might have fixes...
- Try a different USB stick, a different port. Connect to an external USB hub if need be.
- Try booting in BIOS (aka CSM) mode. (note: some BIOSes may not read GPT partitioned disks in CSM)
If those 2 don't work, then try installing from some media which NetBSD does read on your HW. The main disk itself will do if you can't boot off a CD/DVD-ROM:
- Create a 3GB
ext2 partition on the main disk using Linux.
Use: mke2fs -t ext2 -I 128 -O none,sparse_super,large_file,filetype for max. compatibility.
- Copy the NetBSD USB install disk's contents onto this
ext2 partition (Linux reads FFS partitions just fine).
- Boot with the
reloc trick, then pass the -a flag to the bootloader.
- When the kernel asks, tell it a) the
boot disk is sd0 b) the root partition is the ext2 wedge with the NetBSD files, and c) the filesystem is ext2.