Hi to All!
I have an Acer TravelMate B1 TMB118-M laptop that does not run graphics mode in OpenBSD 7.8 with settings by default.
In its composition CPU Intel Celeron N4120 Gemini Lake Refresh with Intel UHD Graphics 600.
The system print at the unknown drm revision 0x06. After loading, I just observe a black screen in graphical mode.
[In FreeBSD all OK with drm graphics mode -> The hardware is OK]
How can I add ID 0x06 support to drm or ask OpenBSD developers about it?
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround
cpu0: Enhanced SpeedStep 1096 MHz: speeds: 1101, 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Gemini Lake Host" rev 0x06
"Intel Gemini Lake DPTF" rev 0x06 at pci0 dev 0 function 1 not configured
"Intel Gemini Lake GNA" rev 0x06 at pci0 dev 0 function 3 not configured
inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 600" rev 0x06
drm0 at inteldrm0
drm:pid0:get_pre_gmdid_step WARNING [drm] Unknown revision 0x06
inteldrm0: msi, GEMINILAKE, gen 9
OpenBSD 7.8 (GENERIC.MP) #54: Sun Oct 12 12:58:11 MDT 2025
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4044337152 (3856MB)
avail mem = 3895103488 (3714MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x7428c000 (21 entries)
bios0: vendor Insyde Corp. version "V1.33" date 12/23/2021
bios0: Acer TravelMate B118-M
efi0 at bios0: UEFI 2.6
efi0: INSYDE Corp. rev 0x58062133
acpi0 at bios0: ACPI 6.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP UEFI UEFI SSDT TPM2 MSDM BDAT HPET LPIT APIC MCFG NPKT PRAM WSMT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT FPDT DBGP DBG2 DMAR WDAT BGRT NHLT
acpi0: wakeup devices RP01(S4) PXSX(S5) RP02(S4) PXSX(S5) RP03(S4) PXSX(S5) RP04(S4) PXSX(S5) RP05(S4) PXSX(S5) RP06(S4) PXSX(S5) XHC(S4) XDCI(S4) HDAS(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 19200000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) N4120 CPU @ 1.10GHz, 1096.97 MHz, 06-7a-08, patch 00000026
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=47f8ebbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND>
cpu0: cpuid 6 eax=57<SENSOR,ARAT,PTS> ecx=1<EFFFREQ>
cpu0: cpuid 7.0 ebx=2294e287<FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA> ecx=40400004<UMIP> edx=ac000400<MD_CLEAR,IBRS,IBPB,STIBP,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=101<LAHF,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=14000c6b<IBRS_ALL,SKIP_L1DFL,MDS_NO,IF_PSCHANGE,MISC_PKG_CT,ENERGY_FILT,GDS_NO,RFDS_CLEAR>
cpu0: 24KB 64b/line 6-way D-cache, 32KB 64b/line 8-way I-cache, 4MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 19MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.2.4.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) N4120 CPU @ 1.10GHz, 1096.97 MHz, 06-7a-08, patch 00000026
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Celeron(R) N4120 CPU @ 1.10GHz, 1096.97 MHz, 06-7a-08, patch 00000026
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Celeron(R) N4120 CPU @ 1.10GHz, 1096.97 MHz, 06-7a-08, patch 00000026
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus 1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus 2 (RP05)
acpiprt6 at acpi0: bus 3 (RP06)
acpiec0 at acpi0
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
"1025129F" at acpi0 not configured
"ETD050E" at acpi0 not configured
"10251229" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpicmos0 at acpi0
glkgpio0 at acpi0 GPO1 uid 1 addr 0xd0c40000/0xcef irq 14, 80 pins
glkgpio1 at acpi0 GPO0 uid 2 addr 0xd0c50000/0xaff irq 14, 80 pins
glkgpio2 at acpi0 GPO2 uid 3 addr 0xd0c90000/0x7bf irq 15, 20 pins
glkgpio3 at acpi0 GPO3 uid 4 addr 0xd0c80000/0x82f irq 14, 35 pins
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
intelpmc0 at acpi0: PEPD
state 0: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x7f:64:0:0x00:0x0000000000000632
frequency: 0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "AP18C8K" serial 46958 type LION oem "LGC"
acpibtn2 at acpi0: LID0
tpm0 at acpi0 TPM 2.0 (TIS) addr 0xfed40000/0x5000, device 0x00fc1050 rev 0x1
"INT3400" at acpi0 not configured
"INT3403" at acpi0 not configured
acpipwrres0 at acpi0: DRST
acpipwrres1 at acpi0: WRST
acpicpu0 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1 mwait.1@0x1), PSS
acpicpu1 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1 mwait.1@0x1), PSS
acpicpu2 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1 mwait.1@0x1), PSS
acpicpu3 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1 mwait.1@0x1), PSS
acpitz0 at acpi0
acpitz0: critical temperature is 104 degC
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround
cpu0: Enhanced SpeedStep 1096 MHz: speeds: 1101, 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Gemini Lake Host" rev 0x06
"Intel Gemini Lake DPTF" rev 0x06 at pci0 dev 0 function 1 not configured
"Intel Gemini Lake GNA" rev 0x06 at pci0 dev 0 function 3 not configured
inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 600" rev 0x06
drm0 at inteldrm0
drm:pid0:get_pre_gmdid_step WARNING [drm] Unknown revision 0x06
inteldrm0: msi, GEMINILAKE, gen 9
azalia0 at pci0 dev 14 function 0 "Intel Gemini Lake HD Audio" rev 0x06: msi
azalia0: codecs: Realtek ALC255, Intel/0x280d, using Realtek ALC255
audio0 at azalia0
"Intel Gemini Lake MEI" rev 0x06 at pci0 dev 15 function 0 not configured
ahci0 at pci0 dev 18 function 0 "Intel Gemini Lake AHCI" rev 0x06: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, CT250MX500SSD1, M3CR>
sd0: 238475MB, 512 bytes/sector, 488397168 sectors, thin
ppb0 at pci0 dev 19 function 0 "Intel Gemini Lake PCIE" rev 0xf6: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 19 function 2 "Intel Gemini Lake PCIE" rev 0xf6: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H (0x5400), msi, address xx:xx:xx:xx:xx:xx
rgephy0 at re0 phy 7: RTL8251, rev. 0
ppb2 at pci0 dev 19 function 3 "Intel Gemini Lake PCIE" rev 0xf6: msi
pci3 at ppb2 bus 3
xhci0 at pci0 dev 21 function 0 "Intel Gemini Lake xHCI" rev 0x06: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
dwiic0 at pci0 dev 23 function 0 "Intel Gemini Lake I2C" rev 0x06: apic 1 int 31
iic0 at dwiic0
dwiic1 at pci0 dev 23 function 1 "Intel Gemini Lake I2C" rev 0x06: apic 1 int 32
iic1 at dwiic1
sdhc0 at pci0 dev 28 function 0 "Intel Gemini Lake eMMC" rev 0x06: apic 1 int 39
sdhc0: SDHC 3.00, 200 MHz base clock
sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, ddr52, dma
pcib0 at pci0 dev 31 function 0 "Intel Gemini Lake LPC" rev 0x06
ichiic0 at pci0 dev 31 function 1 "Intel Gemini Lake SMBus" rev 0x06: apic 1 int 20
iic2 at ichiic0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Elantech Clickpad, version 4, firmware 0x4f5001
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
scsibus2 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Sandisk, DA4064, 0000> removable
sd1: 59640MB, 512 bytes/sector, 122142720 sectors
uhidev0 at uhub0 port 1 configuration 1 interface 0 "KYE SYSTEMS CORP. Wired Mouse" rev 1.10/24.58 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "KYE SYSTEMS CORP. Wired Mouse" rev 1.10/24.58 addr 2
uhidev1: no input interrupt endpoint
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (33f4bf76ab4c8674.a) swap on sd0b dump on sd0b
drm:pid0:intel_step_init WARNING [drm] Unknown revid 0x06
drm : [drm] Unclaimed read from register 0xd8150
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
