I have used NetBSD since a long time and was eagerly waiting for the new 9.0 release. As soon as it was available, I installed it on my Thinkpad X270 to use it as my daily driver. However, comparing to earlier releases, I was really disappointed about its performance on my laptop, as I the following does not work: Trackpad: The trackpad (synaptic) is not working in X11. This is apparently due to the X11 driver not being loaded, althought the NetBSD kernel does correctly detect and configure it and I can see its properties with sysctl. I could not figure out why this is the case. A laptop without a working trackpad is not very useful ACPI power management does not work. I can put the laptop to sleep by putting it into S3 when closing the lid but on wakeup is stalls completely. It does not respond to keyboard inputs and can only be restored by a hard reset. Brightness control does not work, neither through the Thinkpad buttons nor through the software Intel backlight control The clock is always wrong, although configured correctly. the BIOS clock is set to local time, the timezone is configured correctly and the rc.conf is adapted accordingly. Despite of this, the time is incorrect and I wasn't able to find the source of the problem. All of these problems do not exist on OpenBSD current which I ran on that laptop before. I would be grateful if other NetBSD laptop users can provide me with some pointers to possible solutions to these problem, as I really would like to return to using NetBSD as my desktop system.

dev0 I'm running NetBSD-9 since the BETA release on a laptop, HP EliteBook 820 G1, currently on 9.0_STABLE with pkgsrc -current. Trackpad works just fine, except for two-fingers scroll, which I never use anyway. ACPI, I always disable suspend/resume, so I don't know. I use slock and close the lid. Brightness, I'm using redshift and it works fine. Clock, no issues. Although, it does get a bit behind if I leave it on for long periods without reboot. I don't have ntpd running but, I usually shutdown at the end of the day. I think you should post your issues in the users mailing list.

dev0 Hello my friend, I saw this thread and really wanted to reply to you, but I need to be quick and chances are high I won't be able to follow further on. There are some considerations to make beforehand: it's not a secret that OpenBSD is the only BSD ahead of ACPI and input devices support (NetBSD may be the one lagging farthest behind), especially when it comes to Thinkpads. There's really no term of comparison here. this forum is mainly populated with hobbyists, pkgsrc committers, some developer; but it's not like you'll have the chance to meet most of the folks from tech-kern@ here, so I recommend you also forward this thread where it belongs I'm under the impression somebody rushed to release 9.0 so as to make all the new features available before the new branch was mature enough, especially in regard of, if not limited to, desktop support. I'm seeing too many similar complaints for them to pass unnoticed. For instance: the synaptics support for the pms(4) driver has been considerably reworked in the last 2 years (namely now includes 2 fingers scroll), and is still under heavy development, so I think you may realize where your problem lays. A comparable argument can be made in regard of intel/radeon/amdgpu drm, while I'm can't speak about eventual major changes undergone on acpi(4), thinkpad(4) and aps(4) drivers before 9.0, which is what you may want to investigate. Personally my newest laptop (a high-end ASUS from 2014) passed from 8.9N to 9.0_RC2, so I've haven't had the chance to make a more standardized performance comparison with 8.0 release. What I can say, is that I haven't experienced any noticeable performance drop whatsoever, rather it runs pretty fast. the Nvidia card is supported by nouveau(4), and it prevents resuming from S3 just like on other BSDs. Backlight control at hardware level doesn't work just like on other BSDs and, likewise, battery life is ~ 60% of Linux. Touchpad works great though. That said, you should really split your thread in separate questions and elaborate on each, otherwise it will stay what it looks like at the moment, a rant. You should at least provide: dmesg. Better if you enable debugging for the relevant drivers. pcictl pciN list Xorg session logs. Better if you experiment with different InputDevice settings by creating a configuration file inside /etc/X11/xorg.conf.d/ and report back have you tried attaching a USB mouse and tracing windows events with xev? your hw.synaptics.* sysctl settings. What settings did your try to adjust in oder to work this out and what were the results how is your rc.conf 'adapted accordingly' to set the clock and what's in your ntp.conf A couple of observations: you can workaround the backlight issue with an utility capable of controlling it at software level with the RandR extension, as it's been suggested (taking into account in this case decreasing brightness won't save battery charge). Aside from reshift, there's also x11/xbacklight in repo; xbrightness compiles fine on NetBSD as well. dev0 X11 driver not being loaded How did you come to this conclusion? dev0 through the software Intel backlight control since when it's available on netbsd? Best regards

[unknown] It's weird that non-linux not using linux's input api is a foreign concept. It's a bit odd that FreeBSD clones it to begin with.

NetBSD 9 laptop woes

dev0

I have used NetBSD since a long time and was eagerly waiting for the new 9.0 release. As soon as it was available, I installed it on my Thinkpad X270 to use it as my daily driver. However, comparing to earlier releases, I was really disappointed about its performance on my laptop, as I the following does not work:

Trackpad: The trackpad (synaptic) is not working in X11. This is apparently due to the X11 driver not being loaded, althought the NetBSD kernel does correctly detect and configure it and I can see its properties with sysctl. I could not figure out why this is the case. A laptop without a working trackpad is not very useful
ACPI power management does not work. I can put the laptop to sleep by putting it into S3 when closing the lid but on wakeup is stalls completely. It does not respond to keyboard inputs and can only be restored by a hard reset.
Brightness control does not work, neither through the Thinkpad buttons nor through the software Intel backlight control
The clock is always wrong, although configured correctly. the BIOS clock is set to local time, the timezone is configured correctly and the rc.conf is adapted accordingly. Despite of this, the time is incorrect and I wasn't able to find the source of the problem.

All of these problems do not exist on OpenBSD current which I ran on that laptop before.

I would be grateful if other NetBSD laptop users can provide me with some pointers to possible solutions to these problem, as I really would like to return to using NetBSD as my desktop system.

dev0 I'm running NetBSD-9 since the BETA release on a laptop, HP EliteBook 820 G1, currently on 9.0_STABLE with pkgsrc-current.

Trackpad works just fine, except for two-fingers scroll, which I never use anyway.
ACPI, I always disable suspend/resume, so I don't know. I use slock and close the lid.
Brightness, I'm using redshift and it works fine.
Clock, no issues. Although, it does get a bit behind if I leave it on for long periods without reboot. I don't have ntpd running but, I usually shutdown at the end of the day.

I think you should post your issues in the users mailing list.

JuvenalUrbino

dev0 Hello my friend, I saw this thread and really wanted to reply to you, but I need to be quick and chances are high I won't be able to follow further on.
There are some considerations to make beforehand:

it's not a secret that OpenBSD is the only BSD ahead of ACPI and input devices support (NetBSD may be the one lagging farthest behind), especially when it comes to Thinkpads. There's really no term of comparison here.
this forum is mainly populated with hobbyists, pkgsrc committers, some developer; but it's not like you'll have the chance to meet most of the folks from tech-kern@ here, so I recommend you also forward this thread where it belongs
I'm under the impression somebody rushed to release 9.0 so as to make all the new features available before the new branch was mature enough, especially in regard of, if not limited to, desktop support. I'm seeing too many similar complaints for them to pass unnoticed. For instance: the synaptics support for the pms(4) driver has been considerably reworked in the last 2 years (namely now includes 2 fingers scroll), and is still under heavy development, so I think you may realize where your problem lays. A comparable argument can be made in regard of intel/radeon/amdgpu drm, while I'm can't speak about eventual major changes undergone on acpi(4), thinkpad(4) and aps(4) drivers before 9.0, which is what you may want to investigate.
Personally my newest laptop (a high-end ASUS from 2014) passed from 8.9N to 9.0_RC2, so I've haven't had the chance to make a more standardized performance comparison with 8.0 release. What I can say, is that I haven't experienced any noticeable performance drop whatsoever, rather it runs pretty fast. the Nvidia card is supported by nouveau(4), and it prevents resuming from S3 just like on other BSDs. Backlight control at hardware level doesn't work just like on other BSDs and, likewise, battery life is ~ 60% of Linux. Touchpad works great though.

That said, you should really split your thread in separate questions and elaborate on each, otherwise it will stay what it looks like at the moment, a rant.
You should at least provide:

dmesg. Better if you enable debugging for the relevant drivers.
pcictl pciN list
Xorg session logs. Better if you experiment with different InputDevice settings by creating a configuration file inside /etc/X11/xorg.conf.d/ and report back
have you tried attaching a USB mouse and tracing windows events with xev?
your hw.synaptics.* sysctl settings. What settings did your try to adjust in oder to work this out and what were the results
how is your rc.conf 'adapted accordingly' to set the clock and what's in your ntp.conf

A couple of observations:

you can workaround the backlight issue with an utility capable of controlling it at software level with the RandR extension, as it's been suggested (taking into account in this case decreasing brightness won't save battery charge). Aside from reshift, there's also x11/xbacklight in repo; xbrightness compiles fine on NetBSD as well.

dev0 X11 driver not being loaded

How did you come to this conclusion?

dev0 through the software Intel backlight control

since when it's available on netbsd?

Best regards

dev0

JuvenalUrbino Thanks for the comprehensive answer.

Using a USB mouse in X11 works perfectly. It is only the trackpad that does not work correctly. I was not aware of xbrightness and I will try out, as soon as I find time to do so. I have tried xbacklight but it terminates with the error "No outputs have backlight property".

In the Xorg log there are messages about device not being enable automatically, e.g.
Not automatically adding devices

This messages do not appear on OpenBSD or Linux. I was referring to theses messages when saying that the drivers not loaded. Do you know about the status of libinput on NetBSD? May this be the source of my problem?

Some additional information that might help in understanding is attached below.

dmesg


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 9.0 (GENERIC) #0: Fri Feb 14 00:06:28 UTC 2020
	mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 16130 MB
avail memory = 15635 MB
cpu_rng: RDSEED
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: systbl at pa bf0ee018
LENOVO 20HN002QUK (ThinkPad X270)
mainbus0 (root)
ACPI: RSDP 0x00000000BFFFE014 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BFFC1188 0000FC (v01 LENOVO TP-R0I   00001370 PTEC 00000002)
ACPI: FACP 0x00000000BFFF5000 0000F4 (v05 LENOVO TP-R0I   00001370 PTEC 00000002)
ACPI: DSDT 0x00000000BFFCF000 021296 (v02 LENOVO SKL      00000000 INTL 20160527)
ACPI: FACS 0x00000000BFF50000 000040
ACPI: SSDT 0x00000000BFFFC000 0003CC (v02 LENOVO Tpm2Tabl 00001000 INTL 20160527)
ACPI: TPM2 0x00000000BFFFB000 000034 (v03 LENOVO TP-R0I   00001370 PTEC 00000002)
ACPI: UEFI 0x00000000BFF53000 000042 (v01 LENOVO TP-R0I   00001370 PTEC 00000002)
ACPI: SSDT 0x00000000BFFF7000 0030DA (v02 LENOVO SaSsdt   00003000 INTL 20160527)
ACPI: SSDT 0x00000000BFFF6000 0005B6 (v02 LENOVO PerfTune 00001000 INTL 20160527)
ACPI: HPET 0x00000000BFFF4000 000038 (v01 LENOVO TP-R0I   00001370 PTEC 00000002)
ACPI: APIC 0x00000000BFFF3000 0000BC (v03 LENOVO TP-R0I   00001370 PTEC 00000002)
ACPI: MCFG 0x00000000BFFF2000 00003C (v01 LENOVO TP-R0I   00001370 PTEC 00000002)
ACPI: ECDT 0x00000000BFFF1000 000053 (v01 LENOVO TP-R0I   00001370 PTEC 00000002)
ACPI: SSDT 0x00000000BFFCE000 00021C (v01 LENOVO Rmv_Batt 00001000 INTL 20160527)
ACPI: SSDT 0x00000000BFFCC000 0016AD (v02 LENOVO ProjSsdt 00000010 INTL 20160527)
ACPI: BOOT 0x00000000BFFCB000 000028 (v01 LENOVO TP-R0I   00001370 PTEC 00000002)
ACPI: BATB 0x00000000BFFCA000 00004A (v02 LENOVO TP-R0I   00001370 PTEC 00000002)
ACPI: SSDT 0x00000000BFFC8000 0017AE (v02 LENOVO CpuSsdt  00003000 INTL 20160527)
ACPI: SSDT 0x00000000BFFC7000 00056D (v02 LENOVO CtdpB    00001000 INTL 20160527)
ACPI: SSDT 0x00000000BFFC6000 000600 (v02 LENOVO UsbCTabl 00001000 INTL 20160527)
ACPI: WSMT 0x00000000BFFC5000 000028 (v01 LENOVO TP-R0I   00001370 PTEC 00000002)
ACPI: SSDT 0x00000000BFFC4000 000141 (v02 LENOVO HdaDsp   00000000 INTL 20160527)
ACPI: SSDT 0x00000000BFFC3000 0004C5 (v02 LENOVO TbtTypeC 00000000 INTL 20160527)
ACPI: DBGP 0x00000000BFFC2000 000034 (v01 LENOVO TP-R0I   00001370 PTEC 00000002)
ACPI: DBG2 0x00000000BFFFD000 000054 (v00 LENOVO TP-R0I   00001370 PTEC 00000002)
ACPI: POAT 0x00000000BFFC0000 000055 (v03 LENOVO TP-R0I   00001370 PTEC 00000002)
ACPI: DMAR 0x00000000BFFBF000 0000A8 (v01 LENOVO TP-R0I   00001370 PTEC 00000002)
ACPI: ASF! 0x00000000BFFBE000 0000A0 (v32 LENOVO TP-R0I   00001370 PTEC 00000002)
ACPI: FPDT 0x00000000BFFBD000 000044 (v01 LENOVO TP-R0I   00001370 PTEC 00000002)
ACPI: UEFI 0x00000000BFF3A000 00013E (v01 LENOVO TP-R0I   00001370 PTEC 00000002)
ACPI: 11 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz, id 0x806e9
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz, id 0x806e9
cpu1: package 0, core 1, smt 0
cpu2 at mainbus0 apid 1
cpu2: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz, id 0x806e9
cpu2: package 0, core 0, smt 1
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz, id 0x806e9
cpu3: package 0, core 1, smt 1
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <LENOVO,TP-R0I  ,00001370>, AslId <PTEC,00000002>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFD2C37318008 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFD2C3731A008 0006F6 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFD2C37323008 000D14 (v02 PmRef  ApIst    00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFD2F47841808 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 24000000 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
acpiout15 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device
acpiout15: brightness levels: [0-100]
acpiout16 at acpivga0 (SKC0, 0xca00): ACPI Display Output Device
acpivga0: autoconfiguration error: unknown output device acpiout0
acpivga0: autoconfiguration error: unknown output device acpiout1
acpivga0: autoconfiguration error: unknown output device acpiout2
acpivga0: autoconfiguration error: unknown output device acpiout3
acpivga0: autoconfiguration error: unknown output device acpiout4
acpivga0: autoconfiguration error: unknown output device acpiout5
acpivga0: autoconfiguration error: unknown output device acpiout6
acpivga0: autoconfiguration error: unknown output device acpiout7
acpivga0: autoconfiguration error: unknown output device acpiout8
acpivga0: autoconfiguration error: unknown output device acpiout9
acpivga0: autoconfiguration error: unknown output device acpiout10
acpivga0: autoconfiguration error: unknown output device acpiout11
acpivga0: autoconfiguration error: unknown output device acpiout12
acpivga0: autoconfiguration error: unknown output device acpiout13
acpivga0: autoconfiguration error: unknown output device acpiout14
acpivga0: autoconfiguration error: unknown output device acpiout16
acpivga0: connected output devices:
acpivga0:   0x0400 (acpiout15): Unknown Output Device, head 0
IOTR (PNP0C02) at acpi0 not configured
HKEY (LEN0268) at acpi0 not configured
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: ACPI 4.0 functionality present
acpibat1 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
acpibat1: ACPI 4.0 functionality present
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, LEN0071) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, LEN2046) (aux port): irq 12
SIO (PNP0C02) at acpi0 not configured
UCM1 (INT3515) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
EPC (INT0E0C) at acpi0 not configured
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpiwmi0 at acpi0 (WTBT, PNP0C14-TBFP): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpiwmi1 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface
acpiwmibus at acpiwmi1 not configured
acpiwmi2 at acpi0 (WMI2, PNP0C14-2): ACPI WMI Interface
acpiwmibus at acpiwmi2 not configured
acpiwmi3 at acpi0 (WMI3, PNP0C14-3): ACPI WMI Interface
acpiwmibus at acpiwmi3 not configured
TPM (MSFT0101) at acpi0 not configured
PTMD (INT3394) at acpi0 not configured
acpitz0 at acpi0 (THM0)
acpitz0: levels: critical 128.0 C, passive cooling
ACPI: Enabled 4 GPEs in block 00 to 7F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 8.2
pms0: Extended W mode, Passthrough, Middle button, Up/down buttons, Palm detect, One button click pad, Multi-finger Report, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 5904 (rev. 0x02)
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 5916 (rev. 0x02)
xhci0 at pci0 dev 20 function 0: vendor 8086 product 9d2f (rev. 0x21)
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 9d31 (miscellaneous DASP, revision 0x21) at pci0 dev 20 function 2 not configured
dwiic0 at pci0 dev 21 function 0status 0x100002
reset 0xffffffff
rlo 0xffffffff
rho 0xffffffff
: I2C controller instance 0
dwiic0: interrupting at ioapic0 pin 16
status 0x100002
reset 0x3
rlo 0xe1349004
rho 0x0
iic0 at dwiic0: I2C bus
dwiic1 at pci0 dev 21 function 1status 0x100002
reset 0xffffffff
rlo 0xffffffff
rho 0xffffffff
: I2C controller instance 1
dwiic1: interrupting at ioapic0 pin 17
status 0x100002
reset 0x3
rlo 0xe134a004
rho 0x0
iic1 at dwiic1: I2C bus
INT3515 at iic1 addr 0x38 not configured
vendor 8086 product 9d3a (miscellaneous communications, revision 0x21) at pci0 dev 22 function 0 not configured
ppb0 at pci0 dev 28 function 0: vendor 8086 product 9d10 (rev. 0xf1)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
ppb0: link is x1 @ 2.5GT/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled
vendor 10ec product 522a (undefined, subclass 0x00, revision 0x01) at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 2: vendor 8086 product 9d12 (rev. 0xf1)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled
iwm0 at pci2 dev 0 function 0: vendor 8086 product 24fd (rev. 0x78)
iwm0: interrupting at msi1 vec 0
ppb2 at pci0 dev 28 function 4: vendor 8086 product 9d14 (rev. 0xf1)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 8.0GT/s
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled
nvme0 at pci3 dev 0 function 0: vendor 144d product a804 (rev. 0x00)
nvme0: NVMe 1.2
nvme0: for admin queue interrupting at msix2 vec 0
nvme0: SAMSUNG MZVLW512HMJP-000L7, firmware 5L7QCXY7, serial S359NX0HC02331
nvme0: for io queue 1 interrupting at msix2 vec 1 affinity to cpu0
nvme0: for io queue 2 interrupting at msix2 vec 2 affinity to cpu1
nvme0: for io queue 3 interrupting at msix2 vec 3 affinity to cpu2
nvme0: for io queue 4 interrupting at msix2 vec 4 affinity to cpu3
ld0 at nvme0 nsid 1
ld0: 476 GB, 62260 cyl, 255 head, 63 sec, 512 bytes/sect x 1000215216 sectors
pcib0 at pci0 dev 31 function 0: vendor 8086 product 9d4e (rev. 0x21)
vendor 8086 product 9d21 (miscellaneous memory, revision 0x21) at pci0 dev 31 function 2 not configured
hdaudio0 at pci0 dev 31 function 3: HD Audio Controller
hdaudio0: interrupting at msi3 vec 0
hdafg0 at hdaudio0: vendor 10ec product 0298
hdafg0: DAC00 2ch: Speaker [Built-In]
hdafg0: DAC01 2ch: HP Out [Jack]
hdafg0: ADC02 2ch: Mic In [Jack]
hdafg0: ADC03 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz PCM16 PCM20 PCM24
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 4ms for playback
audio0: slinear_le:16 2ch 48000Hz, blk 4ms for recording
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
hdafg1 at hdaudio0: vendor 8086 product 280b
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ichsmb0 at pci0 dev 31 function 4: vendor 8086 product 9d23 (rev. 0x21)
ichsmb0: interrupting at ioapic0 pin 16
iic2 at ichsmb0: I2C bus
wm0 at pci0 dev 31 function 6: I219 LM Ethernet Connection (rev. 0x21)
wm0: interrupting at msi4 vec 0
wm0: PCI-Express bus
wm0: 4096 words FLASH, version 0.1.4
wm0: Ethernet address c8:5b:76:a6:52:a5
wm0: 0x6a4080<FLASH,PCIE,ASF_FIRM,AMT,WOL,EEE>
ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 6
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
isa0 at pcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7tpm0: device 0x001b15d1 rev 0x10
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat 151 us, pow   200 mW
acpicpu0: C3: FFH, lat 1034 us, pow   200 mW
acpicpu0: P0: FFH, lat  10 us, pow 15000 mW, 2801 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 14236 mW, 2800 MHz
acpicpu0: P2: FFH, lat  10 us, pow 13633 mW, 2700 MHz
acpicpu0: P3: FFH, lat  10 us, pow 12318 mW, 2500 MHz
acpicpu0: P4: FFH, lat  10 us, pow 11608 mW, 2400 MHz
acpicpu0: P5: FFH, lat  10 us, pow 10372 mW, 2200 MHz
acpicpu0: P6: FFH, lat  10 us, pow  9182 mW, 2000 MHz
acpicpu0: P7: FFH, lat  10 us, pow  8173 mW, 1800 MHz
acpicpu0: P8: FFH, lat  10 us, pow  7075 mW, 1600 MHz
acpicpu0: P9: FFH, lat  10 us, pow  6480 mW, 1500 MHz
acpicpu0: P10: FFH, lat  10 us, pow  5453 mW, 1300 MHz
acpicpu0: P11: FFH, lat  10 us, pow  4472 mW, 1100 MHz
acpicpu0: P12: FFH, lat  10 us, pow  3140 mW,  800 MHz
acpicpu0: P13: FFH, lat  10 us, pow  2756 mW,  700 MHz
acpicpu0: P14: FFH, lat  10 us, pow  2267 mW,  600 MHz
acpicpu0: P15: FFH, lat  10 us, pow  1435 mW,  400 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2904751270 Hz quality 3000
acpiacad0: AC adapter offline.
uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 6 ports with 6 removable, self powered
uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 12 ports with 12 removable, self powered
ld0: GPT GUID: cec1db19-9373-b54c-9dcc-05a1d01134ac
dk0 at ld0: "EFI System", 204800 blocks at 2048, type: msdos
dk1 at ld0: "NetBSD root", 524288 blocks at 206848, type: ffs
dk2 at ld0: "NetBSD encrypted", 534773760 blocks at 731136, type: cgd
dk3 at ld0: "Linux boot", 614400 blocks at 535504896, type: ext2fs
dk4 at ld0: "Linux LVM", 464095232 blocks at 536119296, type: ext2fs
acpibat0: LGC LION rechargeable battery
acpibat0: granularity: low->warn 0.-01 Wh, warn->full 0.-01 Wh
IPsec: Initialized Security Association Processing.
acpibat1: LGC LION rechargeable battery
acpibat1: granularity: low->warn 0.-01 Wh, warn->full 0.-01 Wh
ugen0 at uhub1 port 3
ugen0: Sierra Wireless, Incorporated (0x1199) Sierra Wireless EM7455 Qualcomm Snapdragon X7 LTE-A (0x9079), rev 2.00/0.06, addr 1
ugen1 at uhub1 port 5
ugen1: Generic (0x58f) EMV Smartcard Reader (0x9540), rev 2.01/1.20, addr 2
ubt0 at uhub1 port 7
ubt0: vendor 8087 (0x8087) product 0a2b (0xa2b), rev 2.00/0.10, addr 3
uvideo0 at uhub1 port 8 configuration 1 interface 0: SunplusIT Inc (0x4f2) Integrated Camera (0xb5ab), rev 2.00/0.10, addr 4
video0 at uvideo0: SunplusIT Inc (0x4f2) Integrated Camera (0xb5ab), rev 2.00/0.10, addr 4
ugen2 at uhub1 port 9
ugen2: vendor 138a (0x138a) product 0097 (0x97), rev 2.00/1.64, addr 5
WARNING: 16 errors while detecting hardware; check system log.
boot device: ld0
root on dk1
root file system type: ffs
kern.module.path=/stand/amd64/9.0/modules
kern info: [drm] Memory usable by graphics device = 4096M
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
kern info: [drm] failed to find VBIOS tables
i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/i915_drv.c:636)i915_firmware_load_error_print] *ERROR* failed to load firmware i915/kbl_dmc_ver1.bin (0)
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/i915_drv.c:651)i915_firmware_load_error_print] *ERROR* The driver is built-in, so to load the firmware you need to
include it either in the kernel (see CONFIG_EXTRA_FIRMWARE) or
in your initrd/initramfs image.
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/intel_guc_loader.c:560)guc_fw_fetch] *ERROR* Failed to fetch GuC firmware from i915/kbl_guc_ver9_14.bin (error -2)
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/i915_gem.c:5417)i915_gem_init_hw] *ERROR* Failed to initialize GuC, error -5 (ignored)
kern info: [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
intelfb0 at i915drmkms0
intelfb0: framebuffer at 0xffffdd013b9e8000, size 1920x1080, depth 32, stride 7680
kern info: [drm] RC6 on
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
iwm0: hw rev 0x230, fw ver 22.361476.0, address 00:28:f8:1f:9e:15
iwm0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Lenovo (0x17ef) Lenovo Precision USB Mouse (0x6050), rev 2.00/0.09, addr 6, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir
wsmouse1 at ums0 mux 0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)

sysctl hw.synaptics

hw.synaptics.up_down_emulation = 2
hw.synaptics.up_down_motion_delta = 1
hw.synaptics.gesture_move = 200
hw.synaptics.gesture_length = 20
hw.synaptics.edge_left = 1632
hw.synaptics.edge_right = 5312
hw.synaptics.edge_top = 4288
hw.synaptics.edge_bottom = 1568
hw.synaptics.edge_motion_delta = 32
hw.synaptics.finger_high = 35
hw.synaptics.finger_low = 20
hw.synaptics.two_fingers_emulation = 0
hw.synaptics.scale_x = 16
hw.synaptics.scale_y = 16
hw.synaptics.scale_z = 32
hw.synaptics.max_speed_x = 32
hw.synaptics.max_speed_y = 32
hw.synaptics.max_speed_z = 2
hw.synaptics.movement_threshold = 4
hw.synaptics.movement_enable = 1
hw.synaptics.button_boundary = 2288
hw.synaptics.button2_edge = 2858
hw.synaptics.button3_edge = 4085
hw.synaptics.finger_scroll-min = 13
hw.synaptics.finger_scroll-max = 14
hw.synaptics.finger_scroll-hysteresis = 30

pcictl pci0 list

000:00:0: Intel Core 7G (U) Host Bridge, DRAM (host bridge, revision 0x02)
000:02:0: Intel HD Graphics 620 (GT2) (VGA display, revision 0x02)
000:20:0: Intel 100 Series xHCI (USB serial bus, xHCI, revision 0x21)
000:20:2: Intel 100 Series Thermal (miscellaneous DASP, revision 0x21)
000:21:0: Intel 100 Series I2C 0 (miscellaneous DASP, revision 0x21)
000:21:1: Intel 100 Series I2C 1 (miscellaneous DASP, revision 0x21)
000:22:0: Intel 100 Series MEI (miscellaneous communications, revision 0x21)
000:28:0: Intel 100 Series PCIe (PCI bridge, revision 0xf1)
000:28:2: Intel 100 Series PCIe (PCI bridge, revision 0xf1)
000:28:4: Intel 100 Series PCIe (PCI bridge, revision 0xf1)
000:31:0: Intel 200 Series LPC (ISA bridge, revision 0x21)
000:31:2: Intel 100 Series PMC (miscellaneous memory, revision 0x21)
000:31:3: Intel 200 Series HD Audio (mixed mode multimedia, revision 0x21)
000:31:4: Intel 100 Series SMBus (SMBus serial bus, revision 0x21)
000:31:6: Intel I219-LM Ethernet Connection (ethernet network, revision 0x21)
002:00:0: Realtek Semiconductor product 522a (undefined, subclass 0x00, revision 0x01)
003:00:0: Intel Dual Band Wireless AC 8265 (miscellaneous network, revision 0x78)
004:00:0: Samsung Electronics (3rd vendor ID) product a804 (Flash mass storage, NVMe)

Xorg.0.log


[    30.917] 
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[    30.918] Build Operating System: NetBSD/amd64 9.0 - The NetBSD Foundation, Inc.
[    30.918] Current Operating System: NetBSD geekbox 9.0 NetBSD 9.0 (GENERIC) #0: Fri Feb 14 00:06:28 UTC 2020  mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC amd64
[    30.919] Build Date: 03 March 2019  07:11:23AM
[    30.919]  
[    30.920] Current version of pixman: 0.38.4
[    30.920] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    30.920] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    30.920] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr  8 10:40:00 2020
[    30.924] (==) Using config file: "/etc/X11/xorg.conf"
[    30.926] (==) ServerLayout "X.org Configured"
[    30.926] (**) |-->Screen "Screen0" (0)
[    30.926] (**) |   |-->Monitor "Monitor0"
[    30.929] (**) |   |-->Device "Card0"
[    30.930] (**) |-->Input Device "Mouse0"
[    30.930] (**) |-->Input Device "Keyboard0"
[    30.932] (==) Not automatically adding devices
[    30.932] (==) Not automatically enabling devices
[    30.932] (==) Not automatically adding GPU devices
[    30.932] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    30.937] (**) FontPath set to:
	/usr/X11R7/lib/X11/fonts/misc/,
	/usr/X11R7/lib/X11/fonts/TTF/,
	/usr/X11R7/lib/X11/fonts/Type1/,
	/usr/X11R7/lib/X11/fonts/75dpi/,
	/usr/X11R7/lib/X11/fonts/100dpi/,
	/usr/X11R7/lib/X11/fonts/misc/,
	/usr/X11R7/lib/X11/fonts/TTF/,
	/usr/X11R7/lib/X11/fonts/Type1/,
	/usr/X11R7/lib/X11/fonts/75dpi/,
	/usr/X11R7/lib/X11/fonts/100dpi/
[    30.937] (**) ModulePath set to "/usr/X11R7/lib/modules"
[    30.938] (II) Loader magic: 0x3968ea20
[    30.938] (II) Module ABI versions:
[    30.938] 	X.Org ANSI C Emulation: 0.4
[    30.938] 	X.Org Video Driver: 24.0
[    30.938] 	X.Org XInput driver : 24.1
[    30.938] 	X.Org Server Extension : 10.0
[    30.957] (--) PCI:*(0@0:2:0) 8086:5916:17aa:5062 rev 2, Mem @ 0xe0000000/16777216, 0xd0000000/268435456, I/O @ 0x0000e000/64
[    30.957] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    30.957] (II) LoadModule: "dri"
[    30.957] (II) Module "dri" already built-in
[    30.957] (II) LoadModule: "dri2"
[    30.957] (II) Module "dri2" already built-in
[    30.957] (II) LoadModule: "glx"
[    30.962] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[    30.972] (II) Module glx: vendor="X.Org Foundation"
[    30.972] 	compiled for 1.20.5, module version = 1.0.0
[    30.972] 	ABI class: X.Org Server Extension, version 10.0
[    30.974] (II) LoadModule: "shadow"
[    30.976] (II) Loading /usr/X11R7/lib/modules/extensions/libshadow.so
[    30.978] (II) Module shadow: vendor="X.Org Foundation"
[    30.978] 	compiled for 1.20.5, module version = 1.1.0
[    30.978] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    30.978] (II) LoadModule: "intel"
[    30.979] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[    31.001] (II) Module intel: vendor="X.Org Foundation"
[    31.002] 	compiled for 1.20.5, module version = 2.99.917
[    31.002] 	Module class: X.Org Video Driver
[    31.002] 	ABI class: X.Org Video Driver, version 24.0
[    31.003] (II) LoadModule: "mouse"
[    31.004] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[    31.007] (II) Module mouse: vendor="X.Org Foundation"
[    31.007] 	compiled for 1.20.5, module version = 1.9.2
[    31.007] 	Module class: X.Org XInput Driver
[    31.007] 	ABI class: X.Org XInput driver, version 24.1
[    31.007] (II) LoadModule: "kbd"
[    31.009] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[    31.010] (II) Module kbd: vendor="X.Org Foundation"
[    31.010] 	compiled for 1.20.5, module version = 1.9.0
[    31.010] 	Module class: X.Org XInput Driver
[    31.010] 	ABI class: X.Org XInput driver, version 24.1
[    31.010] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    31.014] (II) intel: Driver for Intel(R) HD Graphics
[    31.014] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    31.014] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    31.014] (--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode (version 3.32)
[    31.014] (--) using VT number 5
[    31.027] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[    31.029] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    31.029] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 620
[    31.029] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[    31.030] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    31.030] (==) intel(0): RGB weight 888
[    31.030] (==) intel(0): Default visual is TrueColor
[    31.037] (II) intel(0): Output eDP1 using monitor section Monitor0
[    31.039] (II) intel(0): Enabled output eDP1
[    31.039] (II) intel(0): Output DP1 has no monitor section
[    31.039] (II) intel(0): Enabled output DP1
[    31.039] (II) intel(0): Output HDMI1 has no monitor section
[    31.040] (II) intel(0): Enabled output HDMI1
[    31.040] (II) intel(0): Output DP2 has no monitor section
[    31.040] (II) intel(0): Enabled output DP2
[    31.040] (II) intel(0): Output HDMI2 has no monitor section
[    31.040] (II) intel(0): Enabled output HDMI2
[    31.040] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    31.040] (II) intel(0): Output VIRTUAL1 has no monitor section
[    31.040] (II) intel(0): Enabled output VIRTUAL1
[    31.040] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[    31.041] (==) intel(0): TearFree enabled
[    31.041] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    31.041] (==) intel(0): DPI set to (96, 96)
[    31.041] (II) Loading sub module "dri2"
[    31.041] (II) LoadModule: "dri2"
[    31.041] (II) Module "dri2" already built-in
[    31.059] (II) intel(0): SNA initialized with Kabylake (gen9) backend
[    31.060] (==) intel(0): Backing store enabled
[    31.060] (==) intel(0): Silken mouse enabled
[    31.064] (II) intel(0): HW Cursor enabled
[    31.068] (==) intel(0): DPMS enabled
[    31.074] (II) intel(0): [DRI2] Setup complete
[    31.074] (II) intel(0): [DRI2]   DRI driver: i965
[    31.074] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    31.074] (II) intel(0): direct rendering: DRI2 enabled
[    31.074] (II) Initializing extension Generic Event Extension
[    31.076] (II) Initializing extension SHAPE
[    31.077] (II) Initializing extension MIT-SHM
[    31.079] (II) Initializing extension XInputExtension
[    31.084] (II) Initializing extension XTEST
[    31.086] (II) Initializing extension BIG-REQUESTS
[    31.087] (II) Initializing extension SYNC
[    31.089] (II) Initializing extension XKEYBOARD
[    31.095] (II) Initializing extension XC-MISC
[    31.097] (II) Initializing extension SECURITY
[    31.100] (II) Initializing extension XFIXES
[    31.102] (II) Initializing extension XFree86-Bigfont
[    31.103] (II) Initializing extension RENDER
[    31.105] (II) Initializing extension RANDR
[    31.109] (II) Initializing extension COMPOSITE
[    31.111] (II) Initializing extension DAMAGE
[    31.112] (II) Initializing extension MIT-SCREEN-SAVER
[    31.114] (II) Initializing extension DOUBLE-BUFFER
[    31.117] (II) Initializing extension RECORD
[    31.119] (II) Initializing extension DPMS
[    31.121] (II) Initializing extension Present
[    31.126] (II) Initializing extension X-Resource
[    31.128] (II) Initializing extension XVideo
[    31.129] (II) Initializing extension XVideo-MotionCompensation
[    31.129] (II) Initializing extension GLX
[    31.253] (II) AIGLX: Loaded and initialized i965
[    31.253] (II) GLX: Initialized DRI2 GL provider for screen 0
[    31.253] (II) Initializing extension XFree86-VidModeExtension
[    31.254] (II) Initializing extension XFree86-DGA
[    31.256] (II) Initializing extension XFree86-DRI
[    31.256] (II) Initializing extension DRI2
[    31.273] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    31.273] (II) intel(0): Setting screen physical size to 508 x 285
[    31.846] (II) Using input driver 'mouse' for 'Mouse0'
[    31.846] (**) Option "CorePointer"
[    31.846] (**) Mouse0: always reports core events
[    31.846] (**) Option "Protocol" "wsmouse"
[    31.846] (**) Option "Device" "/dev/wsmouse"
[    31.846] (**) Mouse0: Protocol: "wsmouse"
[    31.846] (**) Mouse0: always reports core events
[    32.312] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[    32.312] (**) Option "ZAxisMapping" "4 5 6 7"
[    32.312] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
[    32.312] (**) Mouse0: Buttons: 11
[    32.312] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE, id 6)
[    32.313] (**) Mouse0: (accel) keeping acceleration scheme 1
[    32.313] (**) Mouse0: (accel) acceleration profile 0
[    32.313] (**) Mouse0: (accel) acceleration factor: 2.000
[    32.313] (**) Mouse0: (accel) acceleration threshold: 4
[    32.810] (II) Using input driver 'kbd' for 'Keyboard0'
[    32.810] (**) Option "CoreKeyboard"
[    32.811] (**) Keyboard0: always reports core events
[    32.811] (**) Keyboard0: always reports core events
[    32.811] (**) Option "Protocol" "standard"
[    32.811] (**) Option "XkbRules" "base"
[    32.811] (**) Option "XkbModel" "pc105"
[    32.811] (**) Option "XkbLayout" "us"
[    32.811] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD, id 7)
[    33.082] (II) intel(0): EDID vendor "AUO", prod id 8813
[    33.083] (II) intel(0): Printing DDC gathered Modelines:
[    33.083] (II) intel(0): Modeline "1920x1080"x0.0  141.00  1920 1936 1952 2104  1080 1083 1097 1116 -hsync -vsync (67.0 kHz eP)

rc.conf


#	$NetBSD: rc.conf,v 1.97 2014/07/14 12:29:48 mbalmer Exp $
#
# See rc.conf(5) for more information.
#
# Use program=YES to enable program, NO to disable it. program_flags are
# passed to the program on the command line.
#

# Load the defaults in from /etc/defaults/rc.conf (if it's readable).
# These can be overridden below.
#
if [ -r /etc/defaults/rc.conf ]; then
	. /etc/defaults/rc.conf
fi

# If this is not set to YES, the system will drop into single-user mode.
#
rc_configured=YES

# Add local overrides below.
hostname=geekbox
cgd=YES
wscons=YES
rtclocaltime=YES
powerd=YES
postfix=NO
dhcpcd=YES
estd=YES
estd_flags="-d -l 50 -h 80 -b -C"
rpcbind=YES
microcode=NO
xdm=YES

ntp.conf

# $NetBSD: ntp.conf,v 1.20 2017/01/09 20:05:29 christos Exp $
#
# NetBSD default Network Time Protocol (NTP) configuration file for ntpd

# This file is intended to be both a usable default, and a Quick-Start
# Guide. The directives and options listed here are not at all complete.
# A great deal of additional documentation, including links to FAQS and
# other guides, may be found on the official NTP web site, in particular
#
#	http://www.ntp.org/documentation.html
#

# Process ID file, so that the daemon can be signalled from scripts

pidfile		/var/run/ntpd.pid

# The correction calculated by ntpd(8) for the local system clock's
# drift is stored here.

driftfile	/var/db/ntp.drift

# Suppress the syslog(3) message for each peer synchronization change.

logconfig	-syncstatus

# Refuse to set the local clock if there are too few good peers or servers.
# This may help minimize disruptions due to network congestion. Don't
# do this if you configure only one server!

tos		minsane 2

# Set the number of tries to register with mdns. 0 means never
#
mdnstries	0

# New ntpd disables the ntpdc protocol by default, to re-enable uncomment
# the following line
# enable mode7

# Access control restrictions.
# See /usr/share/doc/html/ntp/accopt.html for syntax.
# See <http://support.ntp.org/bin/view/Support/AccessRestrictions> for advice.
# Last match wins.
#
# Some of the more common keywords are:
#   ignore      Deny packets of all kinds.
#   kod         Send "kiss-o'-death" packets if clients exceed rate
#               limits.
#   nomodify    Deny attempts to modify the state of the server via
#               ntpq or ntpdc queries.
#   noquery     Deny all ntpq and ntpdc queries.  Does not affect time
#               synchronisation.
#   nopeer      Prevent establishing new peer associations.
#               Does not affect peers configured using "peer" lines.
#               Does not affect client/server time synchronisation.
#   noserve     Deny all time synchronisation.  Does not affect ntpq or
#               ntpdc queries.
#   notrap      Deny the trap subset of the ntpdc control message protocol.
#   notrust     Deny packets that are not cryptographically authenticated.
#
# By default, allow client/server time exchange without prior
# arrangement, but deny configuration changes, queries, and peer
# associations that were not explicitly configured.
#
restrict default kod limited nopeer noquery

# Fewer restrictions for the local subnet.
# (Uncomment and adjust as appropriate.)
#
#restrict 192.0.2.0 mask 255.255.255.0 kod limited nomodify notrap nopeer
#restrict 2001:db8:: mask ffff:ffff::  kod limited nomodify notrap nopeer

# No restrictions for localhost.
#
restrict 127.0.0.1
restrict ::1

# Hereafter should be "server" or "peer" statements to configure other
# hosts to exchange NTP packets with.
#
# See <http://support.ntp.org/bin/view/Support/DesigningYourNTPNetwork>
# and <http://support.ntp.org/bin/view/Support/SelectingOffsiteNTPServers>
# for advice.
#
# Peers or servers should be selected in such a way that the network
# path to them is short, uncongested, and symmetric (that is, the series
# of links and routers used to get to the peer is the same one that
# the peer uses to get back).  The best place to start looking for NTP
# peers for your system is within your own network, or at your Internet
# Service Provider (ISP).
#
# Ideally, you should select at least three other systems to talk NTP
# with, for an "what I tell you three times is true" effect.

#peer		an.ntp.peer.goes.here
#server		an.ntp.server.goes.here

# The pool.ntp.org project coordinates public time servers provided by
# volunteers.  See <http://www.pool.ntp.org>.  The *.netbsd.pool.ntp.org
# servers are intended to be used by default on NetBSD hosts, but
# servers that are closer to you are likely to be better.  Consider
# using servers specific to your country, a nearby country, or your
# continent.
#
# The pool.ntp.org project needs more volunteers! The only criteria to
# join are a nailed-up connection and a static IP address. For details,
# see the web page:
#
#	http://www.pool.ntp.org/join.html
#

server		0.netbsd.pool.ntp.org
server		1.netbsd.pool.ntp.org
server		2.netbsd.pool.ntp.org
server		3.netbsd.pool.ntp.org

dev0 Do you know about the status of libinput on NetBSD?

Its wip, help testing it. You can find it in pkgsrc-wip

JuvenalUrbino

dev0 [ 31.846] (II) Using input driver 'mouse' for 'Mouse0'
[ 31.846] () Option "CorePointer"
[ 31.846] () Mouse0: always reports core events
[ 31.846] () Option "Protocol" "wsmouse"
[ 31.846] () Option "Device" "/dev/wsmouse"
[ 31.846] () Mouse0: Protocol: "wsmouse"
[ 31.846] () Mouse0: always reports core events
[ 32.312] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 32.312] () Option "ZAxisMapping" "4 5 6 7"
[ 32.312] () Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7

oh, at first I was positive you had run X :0 -configure beforehand, resulting in some exotic settings, but this is the default failsafe configuration for the standard pointer, so I guess that wasn't the case

nia

Do you know about the status of libinput on NetBSD? May this be the source of my problem?

We don't use libinput and don't need it, we use the xorg wscons driver. You can see it get loaded in the xorg log.

I have tried xbacklight but it terminates with the error "No outputs have backlight property".

Try xrandr or redshift. I've been hacking on thinkpad ACPI support, I'm using an x250 and would also like my brightness buttons to work without the combination of xrandr/redshift/xbindkeys. Mine can suspend and resume, though. Most other developers are using x230s or earlier.

pms0: Extended W mode, Passthrough, Middle button, Up/down buttons, Palm detect, One button click pad, Multi-finger Report, Multi-finger

Your touchpad looks like a clickpad with extra physical buttons (buttons 4 and 5, "up/down"). I recently changed the synaptics driver to map those to left/right click by default in -current (and in 9-stable, it'll be in 9.1), but this isn't possible in 9.0. Nevertheless, pressing down the clickpad should work.

rc.conf

Neither ntpd nor ntpdate are enabled.

JuvenalUrbino

nia

nia We don't use libinput and don't need it, we use the xorg wscons driver. You can see it get loaded in the xorg log.

yes; this concept appears nonetheless foreign to users coming from either Linux or FreeBSD; I keep seeing people asking about libinput support the same way few ago they were asking for xf86-input-synaptics; I guess it would be a good idea to mention this in the wiki (man pages are exhaustive already the way they are)

nia

JuvenalUrbino It's weird that non-linux not using linux's input api is a foreign concept. FreeBSD is the odd one for cloning it...

JuvenalUrbino

nia It's weird that non-linux not using linux's input api is a foreign concept. FreeBSD is the odd one for cloning it...

I concur with you. My main reason for using NetBSD is probably the fact its developers like to think with their own mind 😉

strt32

was eagerly waiting for the new 9.0 release

Well, same thing here. I've been waiting for this release since 8.1, since I thought it fixed so many bugs I encountered earlier.
I installed it today on my x230 and I got pretty disappointed.
My main problem is suspend: in the framebuffer it leaves a lot of letters all over the place (uncleared bytes in vram or something), same thing happened in 8.1, but it was fixed even before branching (8.99.1) and in X, well.. it never returns to X, leaving me with the black screen of the framebuffer.
Also it takes fsck somewhere around 20 mins to check my 2TB hdd, dunno if it's a bug, but it was always pretty quick with other 500GB and 1TB disks I threw at it.

Is there something I can do or am I just screwed?

Dmesg:
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 9.0 (GENERIC) #0: Fri Feb 14 00:06:28 UTC 2020 [ 1.000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC [ 1.000000] total memory = 8147 MB [ 1.000000] avail memory = 7887 MB [ 1.000000] cpu_rng: RDRAND [ 1.000000] rnd: seeded with 256 bits [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [ 1.000003] LENOVO 23248K7 (ThinkPad X230) [ 1.000003] mainbus0 (root) [ 1.000003] ACPI: RSDP 0x00000000000F6810 000024 (v02 CORE ) [ 1.000003] ACPI: XSDT 0x00000000BFF520E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) [ 1.000003] ACPI: FACP 0x00000000BFF55B30 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) [ 1.000003] ACPI: DSDT 0x00000000BFF52280 0038A2 (v02 COREv4 COREBOOT 20110725 INTL 20180810) [ 1.000003] ACPI: FACS 0x00000000BFF52240 000040 [ 1.000003] ACPI: SSDT 0x00000000BFF55C30 001B7E (v02 CORE COREBOOT 0000002A CORE 0000002A) [ 1.000003] ACPI: MCFG 0x00000000BFF577B0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) [ 1.000003] ACPI: TCPA 0x00000000BFF577F0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) [ 1.000003] ACPI: APIC 0x00000000BFF57830 00006C (v02 CORE COREBOOT 00000000 CORE 00000000) [ 1.000003] ACPI: DMAR 0x00000000BFF578A0 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000) [ 1.000003] ACPI: HPET 0x00000000BFF59950 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) [ 1.000003] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.000003] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins [ 1.000003] cpu0 at mainbus0 apid 0 [ 1.000003] cpu0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, id 0x306a9 [ 1.000003] cpu0: package 0, core 0, smt 0 [ 1.000003] cpu1 at mainbus0 apid 1 [ 1.000003] cpu1: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, id 0x306a9 [ 1.000003] cpu1: package 0, core 0, smt 1 [ 1.000003] cpu2 at mainbus0 apid 2 [ 1.000003] cpu2: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, id 0x306a9 [ 1.000003] cpu2: package 0, core 1, smt 0 [ 1.000003] cpu3 at mainbus0 apid 3 [ 1.000003] cpu3: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, id 0x306a9 [ 1.000003] cpu3: package 0, core 1, smt 1 [ 1.000003] acpi0 at mainbus0: Intel ACPICA 20190405 [ 1.000003] acpi0: X/RSDT: OemId <CORE ,COREBOOT,00000000>, AslId <CORE,00000000> [ 1.000003] ACPI Error: No handler for Region [ERAM] (0xffffcd038316f380) [EmbeddedControl] (20190405/evregion-183) [ 1.000003] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20190405/exfldio-323) [ 1.000003] ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.BAT0._STA due to previous error (AE_NOT_EXIST) (20190405/psparse-581) [ 1.000003] ACPI Error: No handler for Region [ERAM] (0xffffcd038316f380) [EmbeddedControl] (20190405/evregion-183) [ 1.000003] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20190405/exfldio-323) [ 1.000003] ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.BAT1._STA due to previous error (AE_NOT_EXIST) (20190405/psparse-581) [ 1.000003] acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f0000000 [ 1.000003] acpi0: SCI interrupting at int 9 [ 1.000003] acpi0: fixed power button present [ 1.000003] timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 [ 1.021313] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [ 1.021313] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 [ 1.021417] acpiec0 at acpi0 (EC, PNP0C09-0): io 0x62,0x66 [ 1.021417] PDRC (PNP0C02) at acpi0 not configured [ 1.021417] acpivga0 at acpi0 (GFX0): ACPI Display Adapter [ 1.021417] acpiout0 at acpivga0 (BOX3, 0x0000): ACPI Display Output Device [ 1.021417] acpiout1 at acpivga0 (LEGA, 0x0000): ACPI Display Output Device [ 1.021417] acpiout2 at acpivga0 (VGA0, 0x0100): ACPI Display Output Device [ 1.021417] acpiout3 at acpivga0 (TV0, 0x0240): ACPI Display Output Device [ 1.021417] acpiout4 at acpivga0 (LCD0, 0x0410): ACPI Display Output Device [ 1.021417] acpiout4: brightness levels: [2,4-5,7,9,11,13,18,20,24,29,33,40,50,67,100] [ 1.021417] acpivga0: autoconfiguration error: unknown output device acpiout0 [ 1.021417] acpivga0: autoconfiguration error: unknown output device acpiout1 [ 1.021417] acpivga0: connected output devices: [ 1.021417] acpivga0: 0x0100 (acpiout2): VGA Analog Monitor, index 0, port 0, head 0, bios detect [ 1.021417] acpivga0: 0x0240 (acpiout3): TV/HDTV Monitor, index 0, port 4, head 0, bios detect [ 1.021417] acpivga0: 0x0410 (acpiout4): Int. Digital Flat Panel, index 0, port 1, head 0, bios detect [ 1.021417] acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter [ 1.021417] acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery [ 1.021417] acpibat1 at acpi0 (BAT1, PNP0C0A-0): ACPI Battery [ 1.021417] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button [ 1.021417] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch [ 1.021417] thinkpad0 at acpi0 (HKEY, IBM0068) [ 1.021417] FWH (INT0800) at acpi0 not configured [ 1.021417] LDRC (PNP0C02) at acpi0 not configured [ 1.021417] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0 [ 1.021417] pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1 [ 1.021417] pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12 [ 1.021417] TPM (PNP0C31) at acpi0 not configured [ 1.021417] acpitz0 at acpi0 (THM0): cpu0 cpu1 cpu2 cpu3 [ 1.021417] acpitz0: active cooling level 0: 80.0C [ 1.021417] acpitz0: levels: critical 100.0 C, passive 90.0 C [ 1.021417] acpifan0 at acpi0 (FAN, PNP0C0B): ACPI Fan [ 1.021417] acpitz1 at acpi0 (THM1): cpu0 cpu1 cpu2 cpu3 [ 1.021417] acpitz1: levels: critical 99.0 C, passive 94.0 C, passive cooling [ 1.021417] CTBL (BOOT0000) at acpi0 not configured [ 1.021417] ACPI: Enabled 1 GPEs in block 00 to 3F [ 1.021417] pckbd0 at pckbc1 (kbd slot) [ 1.021417] pckbc1: using irq 1 for kbd slot [ 1.021417] wskbd0 at pckbd0: console keyboard [ 1.021417] pms0 at pckbc1 (aux slot) [ 1.021417] pms0: Synaptics touchpad version 8.1 [ 1.021417] pms0: Extended W mode, Passthrough, Palm detect, One button click pad, Multi-finger Report, Multi-finger [ 1.021417] pckbc1: using irq 12 for aux slot [ 1.021417] wsmouse0 at pms0 mux 0 [ 1.021417] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.021417] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.021417] pchb0 at pci0 dev 0 function 0: vendor 8086 product 0154 (rev. 0x09) [ 1.021417] i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0166 (rev. 0x09) [ 1.021417] vendor 8086 product 0153 (miscellaneous DASP, revision 0x09) at pci0 dev 4 function 0 not configured [ 1.021417] xhci0 at pci0 dev 20 function 0: vendor 8086 product 1e31 (rev. 0x04) [ 1.021417] xhci0: interrupting at msi0 vec 0 [ 1.021417] xhci0: xHCI version 1.0 [ 1.021417] usb0 at xhci0: USB revision 3.0 [ 1.021417] usb1 at xhci0: USB revision 2.0 [ 1.021417] vendor 8086 product 1e3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured [ 1.021417] wm0 at pci0 dev 25 function 0: PCH2 LAN (82579LM) Controller (rev. 0x04) [ 1.021417] wm0: interrupting at msi1 vec 0 [ 1.021417] wm0: PCI-Express bus [ 1.021417] wm0: 2048 words FLASH, version 0.13.3 [ 1.021417] wm0: Ethernet address 3c:97:0e:d2:08:f7 [ 1.021417] wm0: 0x6a4480<FLASH,IOH_VALID,PCIE,ASF_FIRM,AMT,WOL,EEE> [ 1.021417] ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3 [ 1.021417] ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.021417] ehci0 at pci0 dev 26 function 0: vendor 8086 product 1e2d (rev. 0x04) [ 1.021417] ehci0: interrupting at ioapic0 pin 21 [ 1.021417] ehci0: EHCI version 1.0 [ 1.021417] usb2 at ehci0: USB revision 2.0 [ 1.021417] hdaudio0 at pci0 dev 27 function 0: HD Audio Controller [ 1.021417] hdaudio0: interrupting at msi2 vec 0 [ 1.021417] hdafg0 at hdaudio0: vendor 10ec product 0269 [ 1.021417] hdafg0: DAC00 2ch: Speaker [Built-In] [ 1.021417] hdafg0: DAC01 2ch: HP Out [Jack] [ 1.021417] hdafg0: ADC02 2ch: Mic In [Jack] [ 1.021417] hdafg0: ADC03 2ch: Mic In [Built-In] [ 1.021417] hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3 [ 1.021417] audio0 at hdafg0: playback, capture, full duplex, independent [ 1.021417] audio0: slinear_le:16 2ch 48000Hz, blk 4ms for playback [ 1.021417] audio0: slinear_le:16 2ch 48000Hz, blk 4ms for recording [ 1.021417] spkr0 at audio0: PC Speaker (synthesized) [ 1.021417] wsbell at spkr0 not configured [ 1.021417] hdafg1 at hdaudio0: vendor 8086 product 2806 [ 1.021417] hdafg1: DP00 8ch: Digital Out [Jack] [ 1.021417] hdafg1: DP01 8ch: Digital Out [Jack] [ 1.021417] hdafg1: DP02 8ch: Digital Out [Jack] [ 1.021417] hdafg1: 8ch/0ch 48000Hz PCM16* [ 1.021417] ppb0 at pci0 dev 28 function 0: vendor 8086 product 1e10 (rev. 0xc4) [ 1.021417] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [ 1.021417] ppb0: link is x1 @ 2.5GT/s [ 1.021417] pci1 at ppb0 bus 1 [ 1.021417] pci1: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.021417] sdhc0 at pci1 dev 0 function 0: vendor 1180 product e823 (rev. 0x04) [ 1.021417] sdhc0: interrupting at ioapic0 pin 16 [ 1.021417] sdhc0: SDHC 3.0, rev 5, SDMA, 200000 kHz, HS SDR50 SDR104 HS200 3.3V, re-tuning mode 3, 512 byte blocks [ 1.021417] sdmmc0 at sdhc0 slot 0 [ 1.021417] ppb1 at pci0 dev 28 function 1: vendor 8086 product 1e12 (rev. 0xc4) [ 1.021417] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [ 1.021417] ppb1: link is x1 @ 2.5GT/s [ 1.021417] pci2 at ppb1 bus 2 [ 1.021417] pci2: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.021417] iwm0 at pci2 dev 0 function 0: vendor 8086 product 08b2 (rev. 0x73) [ 1.021417] iwm0: interrupting at msi3 vec 0 [ 1.021417] ppb2 at pci0 dev 28 function 2: vendor 8086 product 1e14 (rev. 0xc4) [ 1.021417] ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [ 1.021417] pci3 at ppb2 bus 3 [ 1.021417] pci3: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.021417] ehci1 at pci0 dev 29 function 0: vendor 8086 product 1e26 (rev. 0x04) [ 1.021417] ehci1: interrupting at ioapic0 pin 19 [ 1.021417] ehci1: EHCI version 1.0 [ 1.021417] usb3 at ehci1: USB revision 2.0 [ 1.021417] ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 1e55 (rev. 0x04) [ 1.021417] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 [ 1.021417] ichlpcib0: 24-bit timer [ 1.021417] tco0 at ichlpcib0: TCO (watchdog) timer configured. [ 1.021417] tco0: Min/Max interval 1/367 seconds [ 1.021417] ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 1e03 (rev. 0x04) [ 1.021417] ahcisata0: 64-bit DMA [ 1.021417] ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xff30ff05<PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SMPS,SSNTF,SNCQ,S64A> [ 1.021417] ahcisata0: interrupting at msi4 vec 0 [ 1.021417] atabus0 at ahcisata0 channel 0 [ 1.021417] atabus1 at ahcisata0 channel 1 [ 1.021417] atabus2 at ahcisata0 channel 2 [ 1.021417] ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 1e22 (rev. 0x04) [ 1.021417] ichsmb0: interrupting at ioapic0 pin 23 [ 1.021417] iic0 at ichsmb0: I2C bus [ 1.021417] vendor 8086 product 1e24 (miscellaneous DASP, revision 0x04) at pci0 dev 31 function 6 not configured [ 1.021417] isa0 at ichlpcib0 [ 1.021417] tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7tpm0: device 0x0000104a rev 0x4e [ 1.021417] pcppi0 at isa0 port 0x61 [ 1.021417] spkr1 at pcppi0: PC Speaker [ 1.021417] wsbell at spkr1 not configured [ 1.021417] midi0 at pcppi0: PC speaker [ 1.021417] sysbeep0 at pcppi0 [ 1.021417] attimer1: attached to pcppi0 [ 1.021417] acpicpu0 at cpu0: ACPI CPU [ 1.021417] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW [ 1.021417] acpicpu0: C2: FFH, lat 63 us, pow 500 mW [ 1.021417] acpicpu0: C3: FFH, lat 90 us, pow 200 mW [ 1.021417] acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2601 MHz, turbo boost [ 1.021417] acpicpu0: P1: FFH, lat 10 us, pow 35000 mW, 2600 MHz [ 1.021417] acpicpu0: P2: FFH, lat 10 us, pow 31561 mW, 2400 MHz [ 1.021417] acpicpu0: P3: FFH, lat 10 us, pow 28247 mW, 2200 MHz [ 1.021417] acpicpu0: P4: FFH, lat 10 us, pow 25084 mW, 2000 MHz [ 1.021417] acpicpu0: P5: FFH, lat 10 us, pow 22064 mW, 1800 MHz [ 1.021417] acpicpu0: P6: FFH, lat 10 us, pow 19135 mW, 1600 MHz [ 1.021417] acpicpu0: P7: FFH, lat 10 us, pow 16344 mW, 1400 MHz [ 1.021417] acpicpu0: P8: FFH, lat 10 us, pow 13666 mW, 1200 MHz [ 1.021417] acpicpu0: T0: FFH, lat 1 us, pow 1000 mW, 100 % [ 1.021417] acpicpu0: T1: FFH, lat 1 us, pow 940 mW, 94 % [ 1.021417] acpicpu0: T2: FFH, lat 1 us, pow 880 mW, 88 % [ 1.021417] acpicpu0: T3: FFH, lat 1 us, pow 820 mW, 82 % [ 1.021417] acpicpu0: T4: FFH, lat 1 us, pow 760 mW, 75 % [ 1.021417] acpicpu0: T5: FFH, lat 1 us, pow 700 mW, 69 % [ 1.021417] acpicpu0: T6: FFH, lat 1 us, pow 640 mW, 63 % [ 1.021417] acpicpu0: T7: FFH, lat 1 us, pow 580 mW, 57 % [ 1.021417] acpicpu0: T8: FFH, lat 1 us, pow 520 mW, 50 % [ 1.021417] acpicpu0: T9: FFH, lat 1 us, pow 460 mW, 44 % [ 1.021417] acpicpu0: T10: FFH, lat 1 us, pow 400 mW, 38 % [ 1.021417] acpicpu0: T11: FFH, lat 1 us, pow 340 mW, 32 % [ 1.021417] acpicpu0: T12: FFH, lat 1 us, pow 280 mW, 25 % [ 1.021417] acpicpu0: T13: FFH, lat 1 us, pow 220 mW, 19 % [ 1.021417] acpicpu0: T14: FFH, lat 1 us, pow 160 mW, 13 % [ 1.021417] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105 [ 1.021417] acpicpu1 at cpu1: ACPI CPU [ 1.021417] acpicpu2 at cpu2: ACPI CPU [ 1.021417] coretemp1 at cpu2: thermal sensor, 1 C resolution, Tjmax=105 [ 1.021417] acpicpu3 at cpu3: ACPI CPU [ 1.021417] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.314154] timecounter: Timecounter "TSC" frequency 2594283040 Hz quality 3000 [ 1.320586] uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0 [ 1.320586] uhub0: 4 ports with 4 removable, self powered [ 1.320586] uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0 [ 1.320586] uhub1: 4 ports with 4 removable, self powered [ 1.324156] acpiacad0: AC adapter online. [ 1.424193] uhub2 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.424193] uhub2: 3 ports with 3 removable, self powered [ 1.424193] uhub3 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.424193] uhub3: 3 ports with 3 removable, self powered [ 1.424193] sdhc0: cmd timeout error [ 1.464208] sdhc0: cmd timeout error [ 1.474493] ahcisata0 port 2: device present, speed: 3.0Gb/s [ 1.474493] ahcisata0 port 0: device present, speed: 6.0Gb/s [ 1.474493] acpibat0: LGC LION rechargeable battery [ 1.474493] acpibat0: granularity: low->warn 0.001 Ah, warn->full 0.001 Ah [ 1.494219] IPsec: Initialized Security Association Processing. [ 1.644274] ld0 at sdmmc0: <0x01:0x5041:SR512:0x85:0x4e64aa47:0x079> [ 1.644274] ld0: 472 MB, 960 cyl, 16 head, 63 sec, 512 bytes/sect x 967680 sectors [ 1.654279] ld0: 4-bit width, 25.000 MHz [ 3.054796] wd0 at atabus0 drive 0 [ 3.054796] wd0: <ST2000LM015-2E8174> [ 3.054796] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [ 3.054796] wd0: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors [ 3.154834] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) [ 3.184845] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) [ 3.184845] wd1 at atabus2 drive 0 [ 3.184845] wd1: <GOODRAM> [ 3.184845] wd1: drive supports 16-sector PIO transfers, LBA48 addressing [ 3.184845] wd1: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors [ 3.184845] wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) [ 3.184845] wd1(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) [ 3.675026] uhub4 at uhub2 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2 [ 3.675026] uhub4: single transaction translator [ 3.675026] uhub5 at uhub3 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2 [ 3.675026] uhub5: single transaction translator [ 3.675026] uhub5: 6 ports with 6 removable, self powered [ 3.675026] uhub4: 8 ports with 8 removable, self powered [ 4.985510] ubt0 at uhub5 port 5 [ 4.985510] ubt0: vendor 8087 (0x8087) product 07dc (0x7dc), rev 2.00/0.01, addr 3 [ 5.955868] uvideo0 at uhub5 port 6 configuration 1 interface 0: Ricoh Company Ltd. (0x5986) Integrated Camera (0x2d2), rev 2.00/0.11, addr 4 [ 5.965872] video0 at uvideo0: Ricoh Company Ltd. (0x5986) Integrated Camera (0x2d2), rev 2.00/0.11, addr 4 [ 6.055906] WARNING: 2 errors while detecting hardware; check system log. [ 6.065947] boot device: wd1 [ 6.065947] root on wd1a dumps on wd1b [ 6.065947] root file system type: ffs [ 6.065947] kern.module.path=/stand/amd64/9.0/modules [ 6.065947] kern info: [drm] Memory usable by graphics device = 2048M [ 6.125931] kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.125931] kern info: [drm] Driver supports precise vblank timestamp query. [ 6.125931] i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0) [ 6.165946] iwm0: hw rev 0x140, fw ver 17.352738.0, address 80:19:34:fc:95:9f [ 6.165946] iwm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 6.165946] iwm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 6.215965] kern info: [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 [ 6.275986] intelfb0 at i915drmkms0 [ 6.275986] intelfb0: framebuffer at 0xffffa400b00ab000, size 1366x768, depth 32, stride 5504 [ 6.576097] kern error: [drm: (/usr/src/sys/external/bsd/drm2/dist/drm/i915/intel_fifo_underrun.c:230)cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A [ 6.576097] kern error: [drm: (/usr/src/sys/external/bsd/drm2/dist/drm/i915/intel_fifo_underrun.c:381)intel_pch_fifo_underrun_irq_handler] *ERROR* PCH transcoder A FIFO underrun [ 7.056275] wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0 [ 7.068888] wsmux1: connecting to wsdisplay0 [ 31.495305] acpibat0: normal capacity on 'charge state' [ 42.169249] wsdisplay0: screen 1 added (default, vt100 emulation) [ 42.169249] wsdisplay0: screen 2 added (default, vt100 emulation) [ 42.169249] wsdisplay0: screen 3 added (default, vt100 emulation) [ 42.169249] wsdisplay0: screen 4 added (default, vt100 emulation) [ 42.329309] /dev/cgd0d: file system not clean (fs_clean=0x8); please fsck(8) [ 42.329309] /dev/cgd0d: lost blocks 0 files 0 [ 482.611996] acpi0: entering state S3 [ 482.611996] Flushing disk caches: 16 done [ 492.455633] sdhc0: ADMA error, status ff [ 492.485644] warning: /usr/src/sys/external/bsd/drm2/dist/drm/i915/intel_uncore.c:284: WARN_ON(domain->wake_count == 0)ioapic0 reenabling [ 493.286824] ahcisata0 port 0: device present, speed: 6.0Gb/s [ 493.857035] autoconfiguration error: ahcisata0 port 0: setting WDCTL_RST failed for drive 0 [ 495.707719] ahcisata0 port 2: device present, speed: 3.0Gb/s [ 499.038951] ahcisata0 port 0: device present, speed: 6.0Gb/s [ 499.649176] ahcisata0 port 2: device present, speed: 3.0Gb/s [ 500.149361] ubt0: detached [ 500.149361] ubt0: at uhub5 port 5 (addr 3) disconnected [ 501.119719] ubt0 at uhub5 port 5 [ 501.119719] ubt0: Intel (0x8087) product 07dc (0x7dc), rev 2.00/0.01, addr 3 [ 502.130093] video0: detached [ 502.130093] uvideo0: detached [ 502.130093] uvideo0: at uhub5 port 6 (addr 4) disconnected [ 503.110455] uvideo0 at uhub5 port 6 configuration 1 interface 0: Ricoh Company Ltd. (0x5986) Integrated Camera (0x2d2), rev 2.00/0.11, addr 4 [ 503.110455] video0 at uvideo0: Ricoh Company Ltd. (0x5986) Integrated Camera (0x2d2), rev 2.00/0.11, addr 4

nia

strt32 You can enable the 'log' option in fstab for faster fscking.