Hi, it's me and my weird problems once again. I just tried booting my image on real hardware for the first time after testing in qemu and while in the beginning everything seems to work just fine as soon as the kernel messages reach `kern.module.path=/stand/i386/9.3/modules` the system simply freezes (i guess that's when it would normally create device nodes or rather execute init). As far as i can tell there is no disk activity from this point on. The keyboard LEDs react to changing capslock/numlock status though (still normal keys don't echo to the console) and pressing the power button triggers a clean shutdown. Sadly kernel messages scroll by to fast to make out much but i saw a message about drm not being configured for vga0 so this seems to be detected. Also the root device is seemingly detected correctly (including filesystem). I also tried enabling verbose/debug output which resulted in one last message after `kern.module.path=/stand/i386/9.3/modules`: `warning: no /dev/console`. I am not sure if this is really related though. Given in this state i can literally do nothing but hit the power button to shut the system down i am somewhat stuck here. Does anyone maybe have an idea on what could be the problem? The exact same disk image boots fine in qemu so i figure it's probably something hardware related. --- * Edit: I tried setting init to /bin/sh using `boot -a` but the result was pretty much the same. After `init: trying /bin/sh` the system just hangs. At least it seems pretty clear this way on where it's actually choking (the handoff to init). From the drive activity LED it seems reading of /bin/sh still happens and then it just stops. * Edit2: I tried booting from the internal IDE (compact flash) port instead of an external USB compact flash reader. Same result sadly. As soon as the kernel tries to execute an (existing) init binary it hangs. Booting from IDE brought up a new kernel message though (`WARNING: 1 error while detecting hardware; check system log.`). To bad i'll probably have to get two USB serial dongles (not sure - i am somewhat doubtful if the bios/bootloader will be smart enough to detect and use something like that) to be able to read said log as neither my target nor any of my other (active) systems have serial ports out of the box. * Edit3: Using a USB keyboard instead of a PS/2 one still displays the `warning: no /dev/console` message but obviously has no problem locating keyboard and display since right after complaining about /dev/console being missing it prints a couple lines about wskbd1 (which seems to be the USB keyboard) connecting to wsdisplay0, so i am kinda clueless whats wrong with /dev/console. Again doesn't make much difference anyways. After printing a couple more lines about the USB keyboard it hangs. Interestingly the USB keyboard doesn't work while answering questions from `boot -a`. It seems capslock/numlock start reacting only after the "attaching" happened. Other keys still have no effect. --- The system is based on Via's VX855 chipset (i think?) and a Via Eden 500Mhz CPU. PCI devices look like this: [CODE] 00:00.0 Host bridge: VIA Technologies, Inc. VX855/VX875 Host Bridge: Host Control (rev 03) 00:00.1 Host bridge: VIA Technologies, Inc. VX855/VX875 Error Reporting 00:00.2 Host bridge: VIA Technologies, Inc. VX855/VX875 Host Bus Control 00:00.3 Host bridge: VIA Technologies, Inc. VX855/VX875 DRAM Bus Control 00:00.4 Host bridge: VIA Technologies, Inc. VX855/VX875 Power Management Control 00:00.5 PIC: VIA Technologies, Inc. VX855/VX875 APIC and Central Traffic Control 00:00.6 Host bridge: VIA Technologies, Inc. VX855/VX875 Scratch Registers 00:00.7 Host bridge: VIA Technologies, Inc. VX855/VX875 North-South Module Interface Control 00:01.0 VGA compatible controller: VIA Technologies, Inc. VX855/VX875 Chrome 9 HCM Integrated Graphics 00:0f.0 IDE interface: VIA Technologies, Inc. VX855/VX875 EIDE Controller 00:10.0 USB controller: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev a0) 00:10.1 USB controller: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev a0) 00:10.4 USB controller: VIA Technologies, Inc. USB 2.0 (rev 90) 00:11.0 ISA bridge: VIA Technologies, Inc. VX855/VX875 Bus Control and Power Management 00:11.7 Host bridge: VIA Technologies, Inc. VX8xx South-North Module Interface Control 00:13.0 PCI bridge: VIA Technologies, Inc. VX855/VX875/VX900 PCI to PCI Bridge 00:14.0 Audio device: VIA Technologies, Inc. VT8237A/VT8251 HDA Controller (rev 20) 01:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (rev 10) [/CODE] (Corrected: I realized the device is really a IGEL D210 not D200. Seems i have a mixed lot of those and they aren't really distinguishable from the outside)

@"nettester"#p15194 I have to ask: does the standard i386/GENERIC kernel exhibit the same behaviour? You can get the kernel logs from that using this procecure: 1. Plug-in the USB-stick with the install image (but, _don't_ boot from this). 2. Boot with `-a' from the _already installed_ version of NetBSD. 3. Use `/sbin/reboot` as `init`. 4. This time, boot into the USB-install image. 5. At the console, run `dmesg >/tmp/d.txt`. You should now have 2 kernel messages in `/tmp/d.txt`. The first from your installed kernel, and the next from the USB-install kernel.

Boot hangs at "kern.module.path=/stand/i386/9.3/modules"

nettester

Hi,

it's me and my weird problems once again. I just tried booting my image on real hardware for the first time after testing in qemu and while in the beginning everything seems to work just fine as soon as the kernel messages reach kern.module.path=/stand/i386/9.3/modules the system simply freezes (i guess that's when it would normally create device nodes or rather execute init). As far as i can tell there is no disk activity from this point on. The keyboard LEDs react to changing capslock/numlock status though (still normal keys don't echo to the console) and pressing the power button triggers a clean shutdown.

Sadly kernel messages scroll by to fast to make out much but i saw a message about drm not being configured for vga0 so this seems to be detected. Also the root device is seemingly detected correctly (including filesystem). I also tried enabling verbose/debug output which resulted in one last message after kern.module.path=/stand/i386/9.3/modules: warning: no /dev/console. I am not sure if this is really related though.

Given in this state i can literally do nothing but hit the power button to shut the system down i am somewhat stuck here. Does anyone maybe have an idea on what could be the problem? The exact same disk image boots fine in qemu so i figure it's probably something hardware related.

Edit: I tried setting init to /bin/sh using boot -a but the result was pretty much the same. After init: trying /bin/sh the system just hangs. At least it seems pretty clear this way on where it's actually choking (the handoff to init). From the drive activity LED it seems reading of /bin/sh still happens and then it just stops.
Edit2: I tried booting from the internal IDE (compact flash) port instead of an external USB compact flash reader. Same result sadly. As soon as the kernel tries to execute an (existing) init binary it hangs. Booting from IDE brought up a new kernel message though (WARNING: 1 error while detecting hardware; check system log.). To bad i'll probably have to get two USB serial dongles (not sure - i am somewhat doubtful if the bios/bootloader will be smart enough to detect and use something like that) to be able to read said log as neither my target nor any of my other (active) systems have serial ports out of the box.
Edit3: Using a USB keyboard instead of a PS/2 one still displays the warning: no /dev/console message but obviously has no problem locating keyboard and display since right after complaining about /dev/console being missing it prints a couple lines about wskbd1 (which seems to be the USB keyboard) connecting to wsdisplay0, so i am kinda clueless whats wrong with /dev/console. Again doesn't make much difference anyways. After printing a couple more lines about the USB keyboard it hangs. Interestingly the USB keyboard doesn't work while answering questions from boot -a. It seems capslock/numlock start reacting only after the "attaching" happened. Other keys still have no effect.

The system is based on Via's VX855 chipset (i think?) and a Via Eden 500Mhz CPU. PCI devices look like this:

00:00.0 Host bridge: VIA Technologies, Inc. VX855/VX875 Host Bridge: Host Control (rev 03)
00:00.1 Host bridge: VIA Technologies, Inc. VX855/VX875 Error Reporting
00:00.2 Host bridge: VIA Technologies, Inc. VX855/VX875 Host Bus Control
00:00.3 Host bridge: VIA Technologies, Inc. VX855/VX875 DRAM Bus Control
00:00.4 Host bridge: VIA Technologies, Inc. VX855/VX875 Power Management Control
00:00.5 PIC: VIA Technologies, Inc. VX855/VX875 APIC and Central Traffic Control
00:00.6 Host bridge: VIA Technologies, Inc. VX855/VX875 Scratch Registers
00:00.7 Host bridge: VIA Technologies, Inc. VX855/VX875 North-South Module Interface Control
00:01.0 VGA compatible controller: VIA Technologies, Inc. VX855/VX875 Chrome 9 HCM Integrated Graphics
00:0f.0 IDE interface: VIA Technologies, Inc. VX855/VX875 EIDE Controller
00:10.0 USB controller: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev a0)
00:10.1 USB controller: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev a0)
00:10.4 USB controller: VIA Technologies, Inc. USB 2.0 (rev 90)
00:11.0 ISA bridge: VIA Technologies, Inc. VX855/VX875 Bus Control and Power Management
00:11.7 Host bridge: VIA Technologies, Inc. VX8xx South-North Module Interface Control
00:13.0 PCI bridge: VIA Technologies, Inc. VX855/VX875/VX900 PCI to PCI Bridge
00:14.0 Audio device: VIA Technologies, Inc. VT8237A/VT8251 HDA Controller (rev 20)
01:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (rev 10)

(Corrected: I realized the device is really a IGEL D210 not D200. Seems i have a mixed lot of those and they aren't really distinguishable from the outside)

kc9udx

When something moves too fast to see, a camera can help.

nettester

kc9udx Actually that's a pretty genius idea. Sadly i don't own a lot of modern multimedia technology or rather practically none so buying some USB TTL modules is probably still the most practical (aka cheap) option for me.

nettester

So i finally managed to read the log (not exactly the way i planned to do it but oh well, if i can't keep track of all the legacy electronics i have lying around, it's my own fault i guess) but sadly that didn't make me any smarter (besides two strange warning messages about not being able to load ufs/ext2fs kernel modules - my kernel doesn't have the MODULAR option set and those modules being inexistant doesn't make any difference running in qemu, so i guess those messages aren't really serious). The log looks (from comparison with the log of the working qemu boot) not overly suspicious to me. It chokes a little on some ACPI stuff but seemingly detects all relevant hardware anyways.

Also otherwise booting with a serial console attached doesn't make any noticeable difference either. It boots fine and then hangs at the handoff to /sbin/init (at least when i put a debug print before the exec call launching /sbin/init said print was the last output before it stopped booting - i don't have a lot experience with NetBSD so i figure it might also very well be hanging at some point during the early stages of init before outputting anything but as i said before echanging /sbin/init for /bin/sh or even /bin/ls doesn't output anything either) while the kernel itself keeps being perfectly responsive (recognizing newly attached USB devices, triggering shutdown on pressing power button, ...).

I don't have much of an idea what else i could try besides maybe removing ACPI support (i have obviously already tried using the generic kernel configuration - same result) so i have attached the boot log. Maybe someone with more NetBSD experience than me can spot anything fishy in there?


NetBSD/x86 BIOS Boot, Revision 5.11 (Mon Jul 31 08:40:08 UTC 2023) (from NetBSD 9.3)
Memory: 639/980864 k
boot -x -v
booting hd0a:netbsd (howto 0xa0000)
-\|/-\|/-\|/4683620-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\+75980|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+259892/-\|/-\| [296720/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+300187/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|]=0x55c1b4
/-\|/-\|/-\|/-\|/-\|WARNING: couldn't open ufs (/stand/i386/9.3/modules/ufs/ufs.kmod)
/-\|/-\|/-\|/-\|/-\|WARNING: couldn't open ext2fs (/stand/i386/9.3/modules/ext2fs/ext2fs.kmod)
WARNING: 2 modules failed to load
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[   1.0000000]     2018, 2019, 2020, 2021, 2022
[   1.0000000]     The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 9.3 (SYSBUILD v1.0) #0: Sat Aug  5 07:54:08 CEST 2023
[   1.0000000] 	fu@teatime:/media/store0/home/fu/src/froute/_build/igel-d200.i386/os.sys/usr/src/sys/arch/i386/compile/obj/IGEL-D200
[   1.0000000] total memory = 958 MB
[   1.0000000] avail memory = 937 MB
[   1.0000000] cpu_rng: VIA
[   1.0000000] timecounter: Timecounters tick every 10.000 msec
[   1.0000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[   1.0000030] efi: missing or invalid systbl
[   1.0000030] BIOS32 rev. 0 found at 0xfa890
[   1.0000030] SMBIOS rev. 2.5 @ 0xf0800 (34 entries)
[   1.0000030] IGEL Technology GmbH H700C (1.1)
[   1.0000030] mainbus0 (root)
[   1.0000030] ACPI: RSDP 0x00000000000F5990 000014 (v00 CN896 )
[   1.0000030] ACPI: RSDT 0x000000003BEE3000 000030 (v01 CN896  AWRDACPI 42302E31 AWRD 00000000)
[   1.0000030] ACPI: FACP 0x000000003BEE3080 000074 (v01 CN896  AWRDACPI 42302E31 AWRD 00000000)
[   1.0000030] ACPI: DSDT 0x000000003BEE3100 0061D7 (v01 CN896  AWRDACPI 00001000 MSFT 03000000)
[   1.0000030] ACPI: FACS 0x000000003BEE0000 000040
[   1.0000030] ACPI: MCFG 0x000000003BEE9380 00003C (v01 CN896  AWRDACPI 42302E31 AWRD 00000000)
[   1.0000030] ACPI: APIC 0x000000003BEE9300 000066 (v01 CN896  AWRDACPI 42302E31 AWRD 00000000)
[   1.0000030] ACPI: Actual Package length (8) is larger than NumElements field (2), truncated
[   1.0000030] ACPI: Actual Package length (8) is larger than NumElements field (2), truncated
[   1.0000030] ACPI: 1 ACPI AML tables successfully acquired and loaded
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.LNK9 (20190405/dspkginit-499)
[   1.0000030] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x3, 24 pins
[   1.0000030] ioapic1 at mainbus0 apid 3: pa 0xfecc0000, version 0x3, 24 pins
[   1.0000030] cpu0 at mainbus0 apid 0
[   1.0000030] cpu0: 2 page colors
[   1.0000030] cpu0: calibrating local timer
[   1.0000030] cpu0: apic clock running at 99 MHz
[   1.0000030] timecounter: Timecounter "lapic" frequency 99819860 Hz quality -100
[   1.0000030] cpu0: VIA C7 Processor 1500MHz, id 0x6d0
[   1.0000030] cpu0: package 0, core 0, smt 0
[   1.0000030] acpi0 at mainbus0: Intel ACPICA 20190405
[   1.0000030] acpi0: X/RSDT: OemId <CN896 ,AWRDACPI,42302e31>, AslId <AWRD,00000000>
[   1.0000030] allocated pic ioapic0 type level pin 9 level 6 to cpu0 slot 0 idt entry 96
[   1.0000030] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
[   1.0000030] MCFG: MEMMAP: 0x0000000000000000-0x000000000009fbff, size=0x000000000009fc00, type=1(Memory)
[   1.0000030] MCFG: MEMMAP: 0x000000000009fc00-0x000000000009ffff, size=0x0000000000000400, type=2(Reserved)
[   1.0000030] MCFG: MEMMAP: 0x00000000000f0000-0x00000000000fffff, size=0x0000000000010000, type=2(Reserved)
[   1.0000030] MCFG: MEMMAP: 0x0000000000100000-0x000000003bedffff, size=0x000000003bde0000, type=1(Memory)
[   1.0000030] MCFG: MEMMAP: 0x000000003bee0000-0x000000003bee2fff, size=0x0000000000003000, type=4(NVS)
[   1.0000030] MCFG: MEMMAP: 0x000000003bee3000-0x000000003beeffff, size=0x000000000000d000, type=3(ACPI)
[   1.0000030] MCFG: MEMMAP: 0x000000003bef0000-0x000000003befffff, size=0x0000000000010000, type=2(Reserved)
[   1.0000030] MCFG: MEMMAP: 0x00000000e0000000-0x00000000efffffff, size=0x0000000010000000, type=2(Reserved)
[   1.0000030] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
[   1.0000030] acpi0: SCI interrupting at int 9
[   1.0000030] acpi0: fixed power button present
[   1.0000030] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
[   1.0386325] acpi0: ACPI-Fast 24-bit timer
[   1.0386325] PWRB (PNP0C0C) at acpi0 not configured
[   1.0386325] SLPB (PNP0C0E) at acpi0 not configured
[   1.0386325] PMIO (PNP0C02) at acpi0 not configured
[   1.0386325] BRCH (PNP0C02) at acpi0 not configured
[   1.0386325] BRCV (PNP0C02) at acpi0 not configured
[   1.0386325] SBRC (PNP0C02) at acpi0 not configured
[   1.0386325] SYSR (PNP0C02) at acpi0 not configured
[   1.0386325] attimer0 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
[   1.0386325] SPKR (PNP0800) at acpi0 not configured
[   1.0386325] COPR (PNP0C04) at acpi0 not configured
[   1.0386325] com2 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
[   1.0386325] com2: ns16550a, working fifo
[   1.0386325] allocated pic ioapic0 type edge pin 4 level 8 to cpu0 slot 1 idt entry 129
[   1.0386325] com3 at acpi0 (UAR2, PNP0501-2): io 0x2f8-0x2ff irq 3
[   1.0386325] com: ns16550a, working fifo
[   1.0386325] com3: console
[   1.0386325] allocated pic ioapic0 type edge pin 3 level 8 to cpu0 slot 2 idt entry 130
[   1.0386325] SRCM (PNP0C02) at acpi0 not configured
[   1.0386325] EXPL (PNP0C02) at acpi0 not configured
[   1.0386325] MEM (PNP0C01) at acpi0 not configured
[   1.0386325] FAN (PNP0C0B) at acpi0 not configured
[   1.0386325] acpitz0 at acpi0 (THRM): cpu0
[   1.0386325] acpitz0: polling interval 30.0 seconds
[   1.0386325] acpitz0: active cooling level 0: 100.0C
[   1.0386325] acpitz0: levels: critical 100.0 C, passive 100.0 C
[   1.0386325] apm0 at acpi0: Power Management spec V1.2
[   1.0386325] ACPI: Enabled 1 GPEs in block 10 to 2F
[   1.0386325] pci0 at mainbus0 bus 0: configuration mode 1
[   1.0386325] acpi0: MCFG: 000:00:0: invalid config space (cfg[0x100]=0x03641106, alias=true)
[   1.0386325] acpi0: MCFG: 000:00:0: Ok (cfg[0x100]=0x03641106 extconf=N)
[   1.0386325] acpi0: MCFG: 000:00:1: invalid config space (cfg[0x100]=0x13641106, alias=true)
[   1.0386325] acpi0: MCFG: 000:00:1: Ok (cfg[0x100]=0x13641106 extconf=N)
[   1.0386325] acpi0: MCFG: 000:00:2: invalid config space (cfg[0x100]=0x23641106, alias=true)
[   1.0386325] acpi0: MCFG: 000:00:2: Ok (cfg[0x100]=0x23641106 extconf=N)
[   1.0386325] acpi0: MCFG: 000:00:3: invalid config space (cfg[0x100]=0x00000000, alias=false)
[   1.0386325] acpi0: MCFG: 000:00:3: Ok (cfg[0x100]=0x00000000 extconf=N)
[   1.0386325] acpi0: MCFG: 000:00:4: invalid config space (cfg[0x100]=0x43641106, alias=true)
[   1.0386325] acpi0: MCFG: 000:00:4: Ok (cfg[0x100]=0x43641106 extconf=N)
[   1.0386325] acpi0: MCFG: 000:00:5: invalid config space (cfg[0x100]=0x00000000, alias=false)
[   1.0386325] acpi0: MCFG: 000:00:5: Ok (cfg[0x100]=0x00000000 extconf=N)
[   1.0386325] acpi0: MCFG: 000:00:6: invalid config space (cfg[0x100]=0x00000000, alias=false)
[   1.0386325] acpi0: MCFG: 000:00:6: Ok (cfg[0x100]=0x00000000 extconf=N)
[   1.0386325] acpi0: MCFG: 000:00:7: invalid config space (cfg[0x100]=0x73641106, alias=true)
[   1.0386325] acpi0: MCFG: 000:00:7: Ok (cfg[0x100]=0x73641106 extconf=N)
[   1.0386325] acpi0: MCFG: 000:01:0: invalid config space (cfg[0x100]=0x00000000, alias=false)
[   1.0386325] acpi0: MCFG: 000:01:0: Ok (cfg[0x100]=0x00000000 extconf=N)
[   1.0386325] acpi0: MCFG: 000:02:0: Ok (cfg[0x100]=0x14010001 extconf=Y)
[   1.0386325] acpi0: MCFG: 000:03:0: Ok (cfg[0x100]=0x14010001 extconf=Y)
[   1.0386325] acpi0: MCFG: 000:15:0: invalid config space (cfg[0x100]=0x05711106, alias=true)
[   1.0386325] acpi0: MCFG: 000:15:0: Ok (cfg[0x100]=0x05711106 extconf=N)
[   1.0386325] acpi0: MCFG: 000:16:0: invalid config space (cfg[0x100]=0x30381106, alias=true)
[   1.0386325] acpi0: MCFG: 000:16:0: Ok (cfg[0x100]=0x30381106 extconf=N)
[   1.0386325] acpi0: MCFG: 000:16:1: invalid config space (cfg[0x100]=0x30381106, alias=true)
[   1.0386325] acpi0: MCFG: 000:16:1: Ok (cfg[0x100]=0x30381106 extconf=N)
[   1.0386325] acpi0: MCFG: 000:16:2: invalid config space (cfg[0x100]=0x30381106, alias=true)
[   1.0386325] acpi0: MCFG: 000:16:2: Ok (cfg[0x100]=0x30381106 extconf=N)
[   1.0386325] acpi0: MCFG: 000:16:3: invalid config space (cfg[0x100]=0x30381106, alias=true)
[   1.0386325] acpi0: MCFG: 000:16:3: Ok (cfg[0x100]=0x30381106 extconf=N)
[   1.0386325] acpi0: MCFG: 000:16:4: invalid config space (cfg[0x100]=0x31041106, alias=true)
[   1.0386325] acpi0: MCFG: 000:16:4: Ok (cfg[0x100]=0x31041106 extconf=N)
[   1.0386325] acpi0: MCFG: 000:17:0: invalid config space (cfg[0x100]=0x33721106, alias=true)
[   1.0386325] acpi0: MCFG: 000:17:0: Ok (cfg[0x100]=0x33721106 extconf=N)
[   1.0386325] acpi0: MCFG: 000:17:7: invalid config space (cfg[0x100]=0xffffffff, alias=false)
[   1.0386325] acpi0: MCFG: 000:17:7: Ok (cfg[0x100]=0xffffffff extconf=N)
[   1.0386325] acpi0: MCFG: 000:19:0: invalid config space (cfg[0x100]=0xffffffff, alias=false)
[   1.0386325] acpi0: MCFG: 000:19:0: Ok (cfg[0x100]=0xffffffff extconf=N)
[   1.0386325] acpi0: MCFG: 000:19:1: invalid config space (cfg[0x100]=0xffffffff, alias=false)
[   1.0386325] acpi0: MCFG: 000:19:1: Ok (cfg[0x100]=0xffffffff extconf=N)
[   1.0386325] acpi0: MCFG: bus 0: valid devices
[   1.0386325] acpi0: MCFG: 000:00:0
[   1.0386325] acpi0: MCFG: 000:00:1
[   1.0386325] acpi0: MCFG: 000:00:2
[   1.0386325] acpi0: MCFG: 000:00:3
[   1.0386325] acpi0: MCFG: 000:00:4
[   1.0386325] acpi0: MCFG: 000:00:5
[   1.0386325] acpi0: MCFG: 000:00:6
[   1.0386325] acpi0: MCFG: 000:00:7
[   1.0386325] acpi0: MCFG: 000:01:0
[   1.0386325] acpi0: MCFG: 000:02:0
[   1.0386325] acpi0: MCFG: 000:03:0
[   1.0386325] acpi0: MCFG: 000:15:0
[   1.0386325] acpi0: MCFG: 000:16:0
[   1.0386325] acpi0: MCFG: 000:16:1
[   1.0386325] acpi0: MCFG: 000:16:2
[   1.0386325] acpi0: MCFG: 000:16:3
[   1.0386325] acpi0: MCFG: 000:16:4
[   1.0386325] acpi0: MCFG: 000:17:0
[   1.0386325] acpi0: MCFG: 000:17:7
[   1.0386325] acpi0: MCFG: 000:19:0
[   1.0386325] acpi0: MCFG: 000:19:1
[   1.0386325] acpi0: acpimcfg_map_bus done
[   1.0386325] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[   1.0386325] pchb0 at pci0 dev 0 function 0: vendor 1106 product 0364 (rev. 0x00)
[   1.0386325] agp at pchb0 not configured
[   1.0386325] pchb1 at pci0 dev 0 function 1: vendor 1106 product 1364 (rev. 0x00)
[   1.0386325] pchb2 at pci0 dev 0 function 2: vendor 1106 product 2364 (rev. 0x00)
[   1.0386325] pchb3 at pci0 dev 0 function 3: vendor 1106 product 3364 (rev. 0x00)
[   1.0386325] pchb4 at pci0 dev 0 function 4: vendor 1106 product 4364 (rev. 0x00)
[   1.0386325] vendor 1106 product 5364 (interrupt system, IO(x) APIC) at pci0 dev 0 function 5 not configured
[   1.0386325] pchb5 at pci0 dev 0 function 6: vendor 1106 product 6364 (rev. 0x00)
[   1.0386325] pchb6 at pci0 dev 0 function 7: vendor 1106 product 7364 (rev. 0x00)
[   1.0386325] ppb0 at pci0 dev 1 function 0: vendor 1106 product b198 (rev. 0x00)
[   1.0386325] pci1 at ppb0 bus 1
[   1.0386325] acpi0: MCFG: 001:00:0: invalid config space (cfg[0x100]=0x33711106, alias=true)
[   1.0386325] acpi0: MCFG: 001:00:0: Ok (cfg[0x100]=0x33711106 extconf=N)
[   1.0386325] acpi0: MCFG: bus 1: valid devices
[   1.0386325] acpi0: MCFG: 001:00:0
[   1.0386325] acpi0: acpimcfg_map_bus done
[   1.0386325] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[   1.0386325] vga0 at pci1 dev 0 function 0: vendor 1106 product 3371 (rev. 0x01)
[   1.0386325] wsdisplay0 at vga0 (kbdmux ignored)
[   1.0386325] drm at vga0 not configured
[   1.0386325] ppb1 at pci0 dev 2 function 0: vendor 1106 product a364 (rev. 0x80)
[   1.0386325] ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
[   1.0386325] pci2 at ppb1 bus 2
[   1.0386325] acpi0: MCFG: bus 2: no valid devices.
[   1.0386325] acpi0: acpimcfg_map_bus done
[   1.0386325] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[   1.0386325] ppb2 at pci0 dev 3 function 0: vendor 1106 product c364 (rev. 0x80)
[   1.0386325] ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
[   1.0386325] pci3 at ppb2 bus 3
[   1.0386325] acpi0: MCFG: bus 3: no valid devices.
[   1.0386325] acpi0: acpimcfg_map_bus done
[   1.0386325] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[   1.0386325] viaide0 at pci0 dev 15 function 0
[   1.0386325] viaide0: VIA Technologies unknown VIA ATA controller
[   1.0386325] viaide0: bus-master DMA support present
[   1.0386325] viaide0: primary channel configured to compatibility mode
[   1.0386325] allocated pic ioapic0 type edge pin 14 level 6 to cpu0 slot 3 idt entry 97
[   1.0386325] viaide0: primary channel interrupting at ioapic0 pin 14
[   1.0386325] atabus0 at viaide0 channel 0
[   1.0386325] viaide0: secondary channel configured to compatibility mode
[   1.0386325] viaide0: secondary channel ignored (disabled)
[   1.0386325] uhci0 at pci0 dev 16 function 0: vendor 1106 product 3038 (rev. 0xb0)
[   1.0386325] allocated pic ioapic0 type level pin 20 level 6 to cpu0 slot 4 idt entry 98
[   1.0386325] uhci0: interrupting at ioapic0 pin 20
[   1.0386325] usb0 at uhci0: USB revision 1.0
[   1.0386325] uhci1 at pci0 dev 16 function 1: vendor 1106 product 3038 (rev. 0xb0)
[   1.0386325] allocated pic ioapic0 type level pin 22 level 6 to cpu0 slot 5 idt entry 99
[   1.0386325] uhci1: interrupting at ioapic0 pin 22
[   1.0386325] usb1 at uhci1: USB revision 1.0
[   1.0386325] uhci2 at pci0 dev 16 function 2: vendor 1106 product 3038 (rev. 0xb0)
[   1.0386325] allocated pic ioapic0 type level pin 21 level 6 to cpu0 slot 6 idt entry 100
[   1.0386325] uhci2: interrupting at ioapic0 pin 21
[   1.0386325] usb2 at uhci2: USB revision 1.0
[   1.0386325] uhci3 at pci0 dev 16 function 3: vendor 1106 product 3038 (rev. 0xb0)
[   1.0386325] allocated pic ioapic0 type level pin 23 level 6 to cpu0 slot 7 idt entry 101
[   1.0386325] uhci3: interrupting at ioapic0 pin 23
[   1.0386325] usb3 at uhci3: USB revision 1.0
[   1.0386325] ehci0 at pci0 dev 16 function 4: vendor 1106 product 3104 (rev. 0x90)
[   1.0386325] allocated pic ioapic0 type level pin 21 level 6 to cpu0 slot 6 idt entry 100
[   1.0386325] ehci0: interrupting at ioapic0 pin 21
[   1.0386325] ehci0: dropped intr workaround enabled
[   1.0386325] ehci0: EHCI version 1.0
[   1.0386325] ehci0: 4 companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
[   1.0386325] usb4 at ehci0: USB revision 2.0
[   1.0386325] vendor 1106 product 3372 (ISA bridge) at pci0 dev 17 function 0 not configured
[   1.0386325] pchb7 at pci0 dev 17 function 7: vendor 1106 product 287e (rev. 0x00)
[   1.0386325] pchb8 at pci0 dev 19 function 0: vendor 1106 product 337b (rev. 0x00)
[   1.0386325] ppb3 at pci0 dev 19 function 1: vendor 1106 product 337a (rev. 0x00)
[   1.0386325] pci4 at ppb3 bus 4
[   1.0386325] acpi0: MCFG: 004:03:0: invalid config space (cfg[0x100]=0x06011814, alias=true)
[   1.0386325] acpi0: MCFG: 004:03:0: Ok (cfg[0x100]=0x06011814 extconf=N)
[   1.0386325] acpi0: MCFG: 004:06:0: invalid config space (cfg[0x100]=0x816710ec, alias=true)
[   1.0386325] acpi0: MCFG: 004:06:0: Ok (cfg[0x100]=0x816710ec extconf=N)
[   1.0386325] acpi0: MCFG: bus 4: valid devices
[   1.0386325] acpi0: MCFG: 004:00:0
[   1.0386325] acpi0: MCFG: 004:03:0
[   1.0386325] acpi0: MCFG: 004:06:0
[   1.0386325] acpi0: acpimcfg_map_bus done
[   1.0386325] pci4: i/o space, memory space enabled
[   1.0386325] vendor 1814 product 0601 (miscellaneous network) at pci4 dev 3 function 0 not configured
[   1.0386325] re0 at pci4 dev 6 function 0: RealTek 8169SC/8110SC Single-chip Gigabit Ethernet (rev. 0x10)
[   1.0386325] allocated pic ioapic0 type level pin 17 level 6 to cpu0 slot 8 idt entry 102
[   1.0386325] re0: interrupting at ioapic0 pin 17
[   1.0386325] re0: Ethernet address 00:e0:c5:3e:e4:d3
[   1.0386325] re0: using 256 tx descriptors
[   1.0386325] OUI 0x00e04c model 0x0011 rev 2 at re0 phy 7 not configured
[   1.0386325] ifmedia_set: no match for 0x20/0xfffffff
[   1.0386325] pci5 at mainbus0 bus 128
[   1.0386325] acpi0: MCFG: 128:01:0: Ok (cfg[0x100]=0x00010002 extconf=Y)
[   1.0386325] acpi0: MCFG: bus 128: valid devices
[   1.0386325] acpi0: MCFG: 128:00:0
[   1.0386325] acpi0: MCFG: 128:01:0
[   1.0386325] acpi0: acpimcfg_map_bus done
[   1.0386325] pci5: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[   1.0386325] vendor 1106 product 3288 (mixed mode multimedia, HD Audio 1.0, revision 0x10) at pci5 dev 1 function 0 not configured
[   1.0386325] isa at mainbus0 not configured
[   1.0386325] acpicpu0 at cpu0: ACPI CPU
[   1.0386325] acpicpu0: C1: HLT, lat   0 us, pow     0 mW
[   1.0386325] acpicpu0: P0: I/O, lat  10 us, pow 15000 mW, 1500 MHz
[   1.0386325] acpicpu0: P1: I/O, lat  10 us, pow  8000 mW,  800 MHz
[   1.0386325] acpicpu0: id 0, lapic id 0, cap 0x00fc, flags 0x00080c23
[   1.0386325] Initializing SSP: 72815e08 78a29c71 675ab246 7d17c1f4 90aaeafd 66c509e9 9a49407b 9376103 
[   1.0386325] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[   1.0386325] TSC not known invariant on this CPU
[   1.0864626] timecounter: Timecounter "TSC" frequency 1496393250 Hz quality -100
[   1.1738120] acpicpu0: ACPI CPUs started
[   1.2225031] uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[   1.3262802] uhub0: 2 ports with 2 removable, self powered
[   1.3907624] uhub1 at usb1: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[   1.4947656] uhub1: 2 ports with 2 removable, self powered
[   1.5592484] uhub2 at usb2: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[   1.6632513] uhub2: 2 ports with 2 removable, self powered
[   1.7277335] uhub3 at usb3: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[   1.8317369] uhub3: 2 ports with 2 removable, self powered
[   1.8962180] uhub4 at usb4: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
[   2.0002212] uhub4: 8 ports with 8 removable, self powered
[   4.3146578] umass0 at uhub4 port 3 configuration 1 interface 0
[   4.3856344] umass0: Generic (0x1307) Mass Storage Device (0x330), rev 2.00/1.00, addr 2
[   4.4813172] umass0: using SCSI over Bulk-Only
[   4.5333191] scsibus0 at umass0: 2 targets, 4 luns per target
[   5.1952747] sd0 at scsibus0 target 0 lun 0: <Generic, Compact Flash, 0.00> disk removable
[   5.2904642] sd0: fabricating a geometry
[   5.3390327] sd0: 973 MB, 973 cyl, 64 head, 32 sec, 512 bytes/sect x 1993824 sectors
[   5.4284767] sd1 at scsibus0 target 0 lun 1: <Generic, SD/MMC, 0.00> disk removable
[   5.5189589] sd1: drive offline
[   5.5574412] sd2 at scsibus0 target 0 lun 2: <Generic, MS/MS-PRO, 0.00> disk removable
[   5.6489637] sd2: drive offline
[   5.6874448] sd3 at scsibus0 target 0 lun 3: <Generic, SM/xD-Picture, 0.00> disk removable
[   5.7856883] sd3: drive offline
[   5.8257163] wd0 at atabus0 drive 0
[   5.8680980] wd0: <TRANSCEND>
[   5.9045001] wd0: drive supports 1-sector PIO transfers, LBA addressing
[   5.9825022] wd0: 1943 MB, 3949 cyl, 16 head, 63 sec, 512 bytes/sect x 3980592 sectors
[   6.0761051] wd0: 32-bit data port
[   6.1156263] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
[   6.2071491] wd0(viaide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
[   6.2830725] crypto: assign driver 0, flags 2
[   6.3361150] crypto: driver 0 registers alg 1 flags 0 maxoplen 0
[   6.4068360] crypto: driver 0 registers alg 2 flags 0 maxoplen 0
[   6.4775589] crypto: driver 0 registers alg 3 flags 0 maxoplen 0
[   6.5482799] crypto: driver 0 registers alg 4 flags 0 maxoplen 0
[   6.6190029] crypto: driver 0 registers alg 5 flags 0 maxoplen 0
[   6.6897258] crypto: driver 0 registers alg 26 flags 0 maxoplen 0
[   6.7614869] crypto: driver 0 registers alg 27 flags 0 maxoplen 0
[   6.8332505] crypto: driver 0 registers alg 29 flags 0 maxoplen 0
[   6.9050127] crypto: driver 0 registers alg 33 flags 0 maxoplen 0
[   6.9767746] crypto: driver 0 registers alg 17 flags 0 maxoplen 0
[   7.0485363] crypto: driver 0 registers alg 6 flags 0 maxoplen 0
[   7.1192600] crypto: driver 0 registers alg 19 flags 0 maxoplen 0
[   7.1910217] crypto: driver 0 registers alg 7 flags 0 maxoplen 0
[   7.2617432] crypto: driver 0 registers alg 20 flags 0 maxoplen 0
[   7.3335063] crypto: driver 0 registers alg 15 flags 0 maxoplen 0
[   7.4052682] crypto: driver 0 registers alg 24 flags 0 maxoplen 0
[   7.4770301] crypto: driver 0 registers alg 25 flags 0 maxoplen 0
[   7.5487926] crypto: driver 0 registers alg 8 flags 0 maxoplen 0
[   7.6195147] crypto: driver 0 registers alg 21 flags 0 maxoplen 0
[   7.6912780] crypto: driver 0 registers alg 16 flags 0 maxoplen 0
[   7.7630399] crypto: driver 0 registers alg 9 flags 0 maxoplen 0
[   7.8337617] crypto: driver 0 registers alg 10 flags 0 maxoplen 0
[   7.9055242] crypto: driver 0 registers alg 13 flags 0 maxoplen 0
[   7.9772870] crypto: driver 0 registers alg 14 flags 0 maxoplen 0
[   8.0490492] crypto: driver 0 registers alg 28 flags 0 maxoplen 0
[   8.1208108] crypto: driver 0 registers alg 30 flags 0 maxoplen 0
[   8.1925733] crypto: driver 0 registers alg 31 flags 0 maxoplen 0
[   8.2643369] crypto: driver 0 registers alg 32 flags 0 maxoplen 0
[   8.3360979] crypto: driver 0 registers alg 11 flags 0 maxoplen 0
[   8.4078613] crypto: driver 0 registers alg 18 flags 0 maxoplen 0
[   8.4796234] crypto: driver 0 registers alg 23 flags 0 maxoplen 0
[   8.5513859] crypto: driver 0 registers alg 22 flags 0 maxoplen 0
[   8.6276808] sd0: fabricating a geometry
[   8.7077351] boot device: sd0
[   8.7467049] root on sd0a dumps on sd0b
[   8.7977982] root file system type: ext2fs
[   8.8512291] kern.module.path=/stand/i386/9.3/modules
[   8.9105098] WARNING: clock lost 8 days
[   8.9552314] WARNING: using filesystem time
[   9.0041178] WARNING: CHECK AND RESET THE DATE!
[   9.0579816] warning: no /dev/console
[  10.0786951] uhidev0 at uhub2 port 2 configuration 1 interface 0
[  10.1504372] uhidev0: Microsoft (0x45e) Wired Keyboard 600 (0x750), rev 1.10/1.10, addr 2, iclass 3/1
[  10.2688282] ukbd0 at uhidev0
[  10.7191436] wskbd0 at ukbd0 (mux ignored)
[  10.7630167] uhidev1 at uhub2 port 2 configuration 1 interface 1
[  10.8337388] uhidev1: Microsoft (0x45e) Wired Keyboard 600 (0x750), rev 1.10/1.10, addr 2, iclass 3/0
[  10.9593118] uhidev1: 3 report ids
[  11.0062803] uhid at uhidev1 reportid 1 not configured
[  11.0666022] uhid at uhidev1 reportid 3 not configured

Note: This log is from booting with an USB keyboard attached. I don't think it differs from booting with a PS/2 keyboard in any substancial form (besides the lines concerning USB obviously) but if i should rather provide one with PS/2 keyboard attached i'll gladly do so. Also don't be confused by the device identifying itself as IGEL H700C. That's actually true. I used a H700C instead of a D210 for testing since it's a very similar system but with an actual serial port.

Any clues would be greatly appreachiated.

Unrelated sidenote: It's kinda crazy that this thing seems to (in theory) have PCI-E capabilities when it really only has one PCI expansion slot.

Edit: Disabling ACPI (boot -2) results in a kernel panic during very early initialization.

rvp

nettester I have to ask: does the standard i386/GENERIC kernel exhibit the same behaviour? You can get the kernel logs from that using this procecure:

Plug-in the USB-stick with the install image (but, don't boot from this).
Boot with `-a' from the already installed version of NetBSD.
Use /sbin/reboot as init.
This time, boot into the USB-install image.
At the console, run dmesg >/tmp/d.txt.

You should now have 2 kernel messages in /tmp/d.txt. The first from your installed kernel, and the next from the USB-install kernel.

nettester

Ladies and gentlemen, i am pleased to announce that this dramatic story has finally reached a happy ending. For everyone who followed my confused stumbling around and is now curious as to what had been the problem after all let me share the mindblowing conclusion i reached. Said conclusion being that i don't have the slightest idea. Like i said, unbelievably mindblowing.

After my last post i was pretty certain that the kernel itself was fine and the hang would have to either be the execution of /sbin/init itself or something that happened during the early stages of initialization, so i stuffed init with debug prints and rebuild the userland. After building i prepared my trusty compact flash, hit the power button for the millionth time and anxiously waited if [FUBAR] init starting would appear on my screen. It didn't (printf seemingly not working during early stages of init?) but to my complete confusion the system proclaimed that it had created a tmpfs on /dev. I think it took my brain like 10 seconds to process the realization that the system was in fact booting...

Now the final mystery is 'why!?' and to be honest i am just baffled. My build process is scripted, so there really shouldn't be any difference beyond the handful of printfs i added. Maybe at some point during the last days i made some change to my build script that unknowingly fixed the userland build? Seems implausible to me (i didn't do a lot of changes at all and i don't see how they would have come even near to affecting the userland build) but that's really the only possible explanation i can come up with (i am not a supersticious person so i don't count voodoo magic as a realistic explanation).

Anyways, i finally have a booting system and that makes me very happy. Now it's time to connect the LTE dongle. Fingers crossed!

Edit: Playing around with the system i made an interesting observation. While the CPU identifies itself as VIA Eden 500MHz which according to all sources i saw (for example https://en.wikipedia.org/wiki/List_of_VIA_Eden_microprocessors) is a configuration that only exists in the "Esther" models and CPU flags also seem to match what would be expected from "Esther", telling GCC to optimize for "esther" produces broken binaries. I just tried to run top and it bailed with illegal instruction. Actually there seem to be a couple binaries exhibiting this behavior. Maybe my original userland build simply ended up with a botched init binary and i just got lucky during the rebuild because of GCC's non deterministic build process?

Edit2: It seems GCC wrongly thinks the CPU supports SSE3 (https://gcc.gnu.org/onlinedocs/gcc/x86-Options.html). At least after passing -march=esther -mtune=esther -mno-sse3 i did not find any binary crashing with illegal instruction yet.

nettester

rvp I am not sure if you read my technical novella until the very end (no problem if you didn't - i tend to produce A LOT of text). Anyways, i already have the logs and the system is booting fine by now (even if it's not really clear what change made the actual difference - the only clue i have so far is that GCC seems to behave sketchy when optimizing for the CPU in question and i have a feeling the kernel build might simply be ignoring CPUFLAGS). Turns out the kernel was fine but for some reason the init binary was broken. The process you describe is a really clever trick though and i will absolutely remember it for when i run into any any similar situation in the future. Thank you!

rvp

nettester I am not sure if you read my technical novella until the very end [...]

I raced through it 😃... but, what surprises me is that init dying (with an illegal instruction presumably) doesn't panic the kernel.

(I'm also an inveterate collector of dmesg outputs. I have quite a collection...)

nettester

rvp Agreed, the system simply getting stuck with no message whatsoever is pretty weird but who knows (if the strange compatibility issue is really the actual culprit here) maybe it's not GCC being sketchy but the CPU. These things weren't designed for general purpose usage after all, so maybe there isn't just some opcodes missing but actually some having implementations that are plain wrong (or act as noops). Especially when it comes to the more exotic extensions i could imagine this going largely unnoticed (back when these CPUs were recent compilers probably didn't do half the optimizations they do today) and in the end one wrongly set flag could be enough to cause an endless loop.

Oh well, that's obviously pure speculation for now but i will keep an eye out for other clues that might point to what really went wrong there.

Edit: Posting dmesg output of my extremely trimmed down kernel is probably kinda pointless so i removed it.